lkml.org 
[lkml]   [2014]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 8/8] ARM: dts: exynos4412-trats: Switch max77686 regulators to GPIO control
Date
Remove fixed regulators (duplicating what max77686 provides) and
add GPIO control to max77686 regulators.

This gives the system full control over those regulators. Previously
the state of such regulators was a mixture of what max77686 driver set
over I2C and what regulator-fixed set through GPIO.

Removal of 'regulator-always-on' from CAM_ISP_CORE_1.2V (buck9) allows
disabling it when it is not used. Previously this regulator was always
enabled because its enable state is a OR of:
- ENB9 GPIO (turned by regulator-fixed),
- BUCK9EN field in BUCK9CTRL register (max77686 through I2C).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/exynos4412-trats2.dts | 25 +++++--------------------
1 file changed, 5 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 7a68e0832cd6..ac1baff7130d 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -58,15 +58,6 @@
#address-cells = <1>;
#size-cells = <0>;

- vemmc_reg: regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
- enable-active-high;
- };
-
cam_io_reg: voltage-regulator-1 {
compatible = "regulator-fixed";
regulator-name = "CAM_SENSOR_A";
@@ -94,16 +85,6 @@
enable-active-high;
};

- cam_isp_core_reg: voltage-regulator-4 {
- compatible = "regulator-fixed";
- regulator-name = "CAM_ISP_CORE_1.2V_EN";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- gpio = <&gpm0 3 0>;
- enable-active-high;
- regulator-always-on;
- };
-
ps_als_reg: voltage-regulator-5 {
compatible = "regulator-fixed";
regulator-name = "LED_A_3.0V";
@@ -405,6 +386,7 @@
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ gpio = <&gpy2 0 0>;
};

ldo22_reg: ldo22 {
@@ -412,6 +394,7 @@
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ gpio = <&gpk0 2 0>;
};

ldo23_reg: ldo23 {
@@ -518,6 +501,7 @@
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
+ gpio = <&gpk0 2 0>;
};

buck9_reg: buck9 {
@@ -525,6 +509,7 @@
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
+ gpio = <&gpm0 3 0>;
};
};
};
@@ -591,7 +576,7 @@
broken-cd;
non-removable;
card-detect-delay = <200>;
- vmmc-supply = <&vemmc_reg>;
+ vmmc-supply = <&ldo22_reg>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <0>;
samsung,dw-mshc-sdr-timing = <2 3>;
--
1.9.1


\
 
 \ /
  Last update: 2014-10-29 16:21    [W:0.088 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site