lkml.org 
[lkml]   [2014]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v2 2/2] usb: dwc2: move the clock management from gadget to platform
Date
This patch move clock management out of gadget into platform,
make both hcd and gadget can use the clock.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

Changes in v2:
- move all the clock operation into platform

drivers/usb/dwc2/gadget.c | 24 ++----------------------
drivers/usb/dwc2/platform.c | 32 ++++++++++++++++++++------------
2 files changed, 22 insertions(+), 34 deletions(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 6ffbfc2..0b108ee 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2852,8 +2852,6 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
hsotg->gadget.dev.of_node = hsotg->dev->of_node;
hsotg->gadget.speed = USB_SPEED_UNKNOWN;

- clk_enable(hsotg->clk);
-
ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret) {
@@ -2903,8 +2901,6 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);

- clk_disable(hsotg->clk);
-
return 0;
}

@@ -2936,10 +2932,8 @@ static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
spin_lock_irqsave(&hsotg->lock, flags);
if (is_on) {
s3c_hsotg_phy_enable(hsotg);
- clk_enable(hsotg->clk);
s3c_hsotg_core_init(hsotg);
} else {
- clk_disable(hsotg->clk);
s3c_hsotg_phy_disable(hsotg);
}

@@ -3408,20 +3402,12 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
hsotg->phyif = GUSBCFG_PHYIF8;
}

- hsotg->clk = devm_clk_get(dev, "otg");
- if (IS_ERR(hsotg->clk)) {
- dev_err(dev, "cannot get otg clock\n");
- return PTR_ERR(hsotg->clk);
- }
-
hsotg->gadget.max_speed = USB_SPEED_HIGH;
hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
hsotg->gadget.name = dev_name(dev);

/* reset the system */

- clk_prepare_enable(hsotg->clk);
-
/* regulators */

for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
@@ -3431,7 +3417,7 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
hsotg->supplies);
if (ret) {
dev_err(dev, "failed to request supplies: %d\n", ret);
- goto err_clk;
+ goto out;
}

ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
@@ -3510,9 +3496,7 @@ err_ep_mem:
kfree(eps);
err_supplies:
s3c_hsotg_phy_disable(hsotg);
-err_clk:
- clk_disable_unprepare(hsotg->clk);
-
+out:
return ret;
}
EXPORT_SYMBOL_GPL(dwc2_gadget_init);
@@ -3532,8 +3516,6 @@ int s3c_hsotg_remove(struct dwc2_hsotg *hsotg)
usb_gadget_unregister_driver(hsotg->driver);
}

- clk_disable_unprepare(hsotg->clk);
-
return 0;
}
EXPORT_SYMBOL_GPL(s3c_hsotg_remove);
@@ -3560,7 +3542,6 @@ int s3c_hsotg_suspend(struct dwc2_hsotg *hsotg)

ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
- clk_disable(hsotg->clk);
}

return ret;
@@ -3576,7 +3557,6 @@ int s3c_hsotg_resume(struct dwc2_hsotg *hsotg)
dev_info(hsotg->dev, "resuming usb gadget %s\n",
hsotg->driver->driver.name);

- clk_enable(hsotg->clk);
ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
}
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 77c8417..356e378 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -37,6 +37,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
@@ -122,6 +123,7 @@ static int dwc2_driver_remove(struct platform_device *dev)

dwc2_hcd_remove(hsotg);
s3c_hsotg_remove(hsotg);
+ clk_disable_unprepare(hsotg->clk);

return 0;
}
@@ -216,24 +218,28 @@ static int dwc2_driver_probe(struct platform_device *dev)
hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);

spin_lock_init(&hsotg->lock);
- retval = dwc2_gadget_init(hsotg, irq);
- if (retval) {
- /*
- * We will not fail the driver initialization for dual-role
- * if no clock node is supplied. However, all gadget
- * functionality will be disabled if a clock node is not
- * provided. Host functionality will continue.
- * TO-DO: make clock node a requirement for the HCD.
- */
- if (!IS_ERR(hsotg->clk))
- return retval;
+ hsotg->clk = devm_clk_get(hsotg->dev, "otg");
+ if (IS_ERR(hsotg->clk)) {
+ dev_err(dev, "cannot get otg clock\n");
+ return PTR_ERR(hsotg->clk);
}
+
+ clk_prepare_enable(hsotg->clk);
+
+ retval = dwc2_gadget_init(hsotg, irq);
+ if (retval)
+ goto out;
+
retval = dwc2_hcd_init(hsotg, irq, params);
if (retval)
- return retval;
+ goto out;

platform_set_drvdata(dev, hsotg);

+out:
+ if (IS_ERR(retval))
+ clk_disable_unprepare(hsotg->clk);
+
return retval;
}

@@ -245,6 +251,7 @@ static int dwc2_suspend(struct device *dev)
if (dwc2_is_device_mode(dwc2))
if (!IS_ERR(dwc2->clk))
ret = s3c_hsotg_suspend(dwc2);
+ clk_disable(dwc2->clk);
return ret;
}

@@ -253,6 +260,7 @@ static int dwc2_resume(struct device *dev)
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
int ret = 0;

+ clk_enable(dwc2->clk);
if (dwc2_is_device_mode(dwc2))
if (!IS_ERR(dwc2->clk))
ret = s3c_hsotg_resume(dwc2);
--
1.9.1


\
 
 \ /
  Last update: 2014-10-29 15:21    [W:0.030 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site