lkml.org 
[lkml]   [2014]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 00/20] rtc: omap: fixes and power-off feature
On 10/29/2014 05:34 AM, Johan Hovold wrote:
> On Tue, Oct 28, 2014 at 03:16:10PM +0000, Russell King - ARM Linux wrote:
>> On Tue, Oct 28, 2014 at 02:12:57PM +0100, Johan Hovold wrote:
>>> That's not what I was trying to refer to. But the patch set explicitly
>>> allows for multiple, prioritised power-off handlers, which can power
>>> off a board in different ways and with various degrees of success.
>>> Specifically, it allows for fallback handlers in case one or more
>>> power-off handlers fail.
>>>
>>> So if we allow for that, what is to prevent the final power-off handler
>>> from failing? And should this not be logged by arch code in the same way
>>> as failure to restart is?
>>
>> And how is that different from having a set of power-off handlers, and
>> reporting when each individual one fails? Don't you want to know if
>> your primary high priority reboot handler fails, just as much as you
>> want to know if your final last-resort power-off handler fails?
>
> Good point. Failed power-off should probably be logged by the power-off
> call chain implementation (which seems to makes notifier chains a bad
> fit).
>
Good that I just replaced notifier chain with an open coded implementation.
Sure, that is possible, but I would prefer to do that as a follow-up commit,
and it should be discussed in the context of the power-off handler patch set.

> And what about any power-off latencies? Should this always be dealt with
> in the power-off handler?
>
> Again, if it's predictable and high, as in the OMAP RTC case, it should
> go in the handler. But what if it's just normal bus latencies
> (peripheral busses, i2c, or whatever people may come up with)?
>
> Should there always be a short delay before calling the next handler?
>
That delay would depend on the individual power-off handler, so I think
the current implementation works just fine (where power-off handlers
implement the delay).

We could move the delay into the infrastructure, but it would have
to be configurable. I would prefer to consider that as a follow-up patch
to not overload the power-off handler patch set with too many changes
at the same time.

>> Or different from having no power-off handlers.
>
> That is actually quite different, as in that case we call machine_halt
> instead (via kernel_halt).
>
>> Here's the x86 code:
>>
>> void machine_power_off(void)
>> {
>> machine_ops.power_off();
>> }
>>
>> struct machine_ops machine_ops = {
>> .power_off = native_machine_power_off,
>> ...
>>
>> static void native_machine_power_off(void)
>> {
>> if (pm_power_off) {
>> if (!reboot_force)
>> machine_shutdown();
>> pm_power_off();
>> }
>> /* A fallback in case there is no PM info available */
>> tboot_shutdown(TB_SHUTDOWN_HALT);
>> }
>>
>> void tboot_shutdown(u32 shutdown_type)
>> {
>> void (*shutdown)(void);
>>
>> if (!tboot_enabled())
>> return;
>>
>> See - x86 can very well just fall straight back out of machine_power_off()
>> if there's no pm_power_off() hook and tboot is not enabled.
>
> I never doubted that, but is the right thing to do? Not all arches do it
> that way.
>
> And what about the killing of init? Shall we simply consider that a
> systemd bug?
>
> case LINUX_REBOOT_CMD_POWER_OFF:
> kernel_power_off();
> do_exit(0);
> break;
>
> If power-off fails (for whatever reason), do_exit(0) will trigger a
> panic when called from PID 1.
>
Common handling of that condition - eg to call machine_halt() - might be
an option. Separate patch, though.

Guenter



\
 
 \ /
  Last update: 2014-10-29 15:01    [W:0.125 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site