lkml.org 
[lkml]   [2014]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] of: spi: Export single device registration method and accessors (v2)
Date
Dynamically inserting spi device nodes requires the use of a single
device registration method. Rework and export it.

Methods to lookup a device/master using a device node are added
as well, of_find_spi_master_by_node() & of_find_spi_device_by_node().

Changes since v1:
* Brown paper bug with parameter on of_register_spi_device().

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
---
drivers/spi/spi.c | 255 +++++++++++++++++++++++++++++++++---------------------
1 file changed, 157 insertions(+), 98 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ebcb33d..4778366 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1220,6 +1220,122 @@ err_init_queue:
/*-------------------------------------------------------------------------*/

#if defined(CONFIG_OF)
+
+static struct spi_device *
+of_register_spi_device(struct spi_master *master, struct device_node *nc)
+{
+ struct spi_device *spi;
+ int rc;
+ u32 value;
+
+ /* Alloc an spi_device */
+ spi = spi_alloc_device(master);
+ if (!spi) {
+ dev_err(&master->dev, "spi_device alloc error for %s\n",
+ nc->full_name);
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ /* Select device driver */
+ rc = of_modalias_node(nc, spi->modalias,
+ sizeof(spi->modalias));
+ if (rc < 0) {
+ dev_err(&master->dev, "cannot find modalias for %s\n",
+ nc->full_name);
+ goto err_out;
+ }
+
+ /* Device address */
+ rc = of_property_read_u32(nc, "reg", &value);
+ if (rc) {
+ dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
+ nc->full_name, rc);
+ goto err_out;
+ }
+ spi->chip_select = value;
+
+ /* Mode (clock phase/polarity/etc.) */
+ if (of_find_property(nc, "spi-cpha", NULL))
+ spi->mode |= SPI_CPHA;
+ if (of_find_property(nc, "spi-cpol", NULL))
+ spi->mode |= SPI_CPOL;
+ if (of_find_property(nc, "spi-cs-high", NULL))
+ spi->mode |= SPI_CS_HIGH;
+ if (of_find_property(nc, "spi-3wire", NULL))
+ spi->mode |= SPI_3WIRE;
+ if (of_find_property(nc, "spi-lsb-first", NULL))
+ spi->mode |= SPI_LSB_FIRST;
+
+ /* Device DUAL/QUAD mode */
+ if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
+ switch (value) {
+ case 1:
+ break;
+ case 2:
+ spi->mode |= SPI_TX_DUAL;
+ break;
+ case 4:
+ spi->mode |= SPI_TX_QUAD;
+ break;
+ default:
+ dev_warn(&master->dev,
+ "spi-tx-bus-width %d not supported\n",
+ value);
+ break;
+ }
+ }
+
+ if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
+ switch (value) {
+ case 1:
+ break;
+ case 2:
+ spi->mode |= SPI_RX_DUAL;
+ break;
+ case 4:
+ spi->mode |= SPI_RX_QUAD;
+ break;
+ default:
+ dev_warn(&master->dev,
+ "spi-rx-bus-width %d not supported\n",
+ value);
+ break;
+ }
+ }
+
+ /* Device speed */
+ rc = of_property_read_u32(nc, "spi-max-frequency", &value);
+ if (rc) {
+ dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
+ nc->full_name, rc);
+ goto err_out;
+ }
+ spi->max_speed_hz = value;
+
+ /* IRQ */
+ spi->irq = irq_of_parse_and_map(nc, 0);
+
+ /* Store a pointer to the node in the device structure */
+ of_node_get(nc);
+ spi->dev.of_node = nc;
+
+ /* Register the new device */
+ request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
+ rc = spi_add_device(spi);
+ if (rc) {
+ dev_err(&master->dev, "spi_device register error %s\n",
+ nc->full_name);
+ goto err_out;
+ }
+
+ return spi;
+
+err_out:
+ spi_dev_put(spi);
+ return ERR_PTR(rc);
+}
+
/**
* of_register_spi_devices() - Register child devices onto the SPI bus
* @master: Pointer to spi_master device
@@ -1229,120 +1345,63 @@ err_init_queue:
*/
static void of_register_spi_devices(struct spi_master *master)
{
- struct spi_device *spi;
struct device_node *nc;
- int rc;
- u32 value;
+ struct spi_device *spi;

if (!master->dev.of_node)
return;

for_each_available_child_of_node(master->dev.of_node, nc) {
- /* Alloc an spi_device */
- spi = spi_alloc_device(master);
- if (!spi) {
- dev_err(&master->dev, "spi_device alloc error for %s\n",
+ spi = of_register_spi_device(master, nc);
+ if (IS_ERR(spi))
+ dev_warn(&master->dev, "Failed to create SPI device for %s\n",
nc->full_name);
- spi_dev_put(spi);
- continue;
- }
+ }
+}

- /* Select device driver */
- if (of_modalias_node(nc, spi->modalias,
- sizeof(spi->modalias)) < 0) {
- dev_err(&master->dev, "cannot find modalias for %s\n",
- nc->full_name);
- spi_dev_put(spi);
- continue;
- }
+static int of_dev_node_match(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}

- /* Device address */
- rc = of_property_read_u32(nc, "reg", &value);
- if (rc) {
- dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
- nc->full_name, rc);
- spi_dev_put(spi);
- continue;
- }
- spi->chip_select = value;
-
- /* Mode (clock phase/polarity/etc.) */
- if (of_find_property(nc, "spi-cpha", NULL))
- spi->mode |= SPI_CPHA;
- if (of_find_property(nc, "spi-cpol", NULL))
- spi->mode |= SPI_CPOL;
- if (of_find_property(nc, "spi-cs-high", NULL))
- spi->mode |= SPI_CS_HIGH;
- if (of_find_property(nc, "spi-3wire", NULL))
- spi->mode |= SPI_3WIRE;
- if (of_find_property(nc, "spi-lsb-first", NULL))
- spi->mode |= SPI_LSB_FIRST;
-
- /* Device DUAL/QUAD mode */
- if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
- switch (value) {
- case 1:
- break;
- case 2:
- spi->mode |= SPI_TX_DUAL;
- break;
- case 4:
- spi->mode |= SPI_TX_QUAD;
- break;
- default:
- dev_warn(&master->dev,
- "spi-tx-bus-width %d not supported\n",
- value);
- break;
- }
- }
+/* bah; the match functions differ just by const-ness */
+static int of_dev_node_match_const(struct device *dev, const void *data)
+{
+ return dev->of_node == data;
+}

- if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
- switch (value) {
- case 1:
- break;
- case 2:
- spi->mode |= SPI_RX_DUAL;
- break;
- case 4:
- spi->mode |= SPI_RX_QUAD;
- break;
- default:
- dev_warn(&master->dev,
- "spi-rx-bus-width %d not supported\n",
- value);
- break;
- }
- }
+/* must call put_device() when done with returned spi_device device */
+struct spi_device *of_find_spi_device_by_node(struct device_node *node)
+{
+ struct device *dev;

- /* Device speed */
- rc = of_property_read_u32(nc, "spi-max-frequency", &value);
- if (rc) {
- dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
- nc->full_name, rc);
- spi_dev_put(spi);
- continue;
- }
- spi->max_speed_hz = value;
+ dev = bus_find_device(&spi_bus_type, NULL, node,
+ of_dev_node_match);
+ if (!dev)
+ return NULL;

- /* IRQ */
- spi->irq = irq_of_parse_and_map(nc, 0);
+ return to_spi_device(dev);
+}
+EXPORT_SYMBOL(of_find_spi_device_by_node);

- /* Store a pointer to the node in the device structure */
- of_node_get(nc);
- spi->dev.of_node = nc;
+/* forward decl */
+static struct class spi_master_class;

- /* Register the new device */
- request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
- rc = spi_add_device(spi);
- if (rc) {
- dev_err(&master->dev, "spi_device register error %s\n",
- nc->full_name);
- spi_dev_put(spi);
- }
+/* the spi masters are not using spi_bus, so we find it with another way */
+struct spi_master *of_find_spi_master_by_node(struct device_node *node)
+{
+ struct device *dev;

- }
+ dev = class_find_device(&spi_master_class, NULL, node,
+ of_dev_node_match_const);
+ if (!dev)
+ return NULL;
+
+ /* reference got in class_find_device */
+ return container_of(dev, struct spi_master, dev);
}
+EXPORT_SYMBOL(of_find_spi_master_by_node);
+
#else
static void of_register_spi_devices(struct spi_master *master) { }
#endif
--
1.7.12


\
 
 \ /
  Last update: 2014-10-29 10:01    [W:0.064 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site