lkml.org 
[lkml]   [2014]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/6] vfio: introduce the VFIO_DMA_MAP_FLAG_NOEXEC flag
Date
We introduce the VFIO_DMA_MAP_FLAG_NOEXEC flag to the VFIO dma map call,
and expose its availability via the capability VFIO_DMA_NOEXEC_IOMMU.
This way the user can control whether the XN flag will be set on the
requested mappings. The IOMMU_NOEXEC flag needs to be available for all
the IOMMUs of the container used.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
---
include/uapi/linux/vfio.h | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 1e39842..06d66c9 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -30,6 +30,7 @@ enum vfio_iommu_cap {
VFIO_DMA_CC_IOMMU = 4, /* IOMMU enforces DMA cache coherence
(ex. PCIe NoSnoop stripping) */
VFIO_EEH = 5, /* Check if EEH is supported */
+ VFIO_DMA_NOEXEC_IOMMU = 6,
};

/*
@@ -394,12 +395,17 @@ struct vfio_iommu_type1_info {
*
* Map process virtual addresses to IO virtual addresses using the
* provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
+ *
+ * To use the VFIO_DMA_MAP_FLAG_NOEXEC flag, the container must support the
+ * VFIO_DMA_NOEXEC_IOMMU capability. If mappings are created using this flag,
+ * any groups subsequently added to the container must support this capability.
*/
struct vfio_iommu_type1_dma_map {
__u32 argsz;
__u32 flags;
#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */
#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */
+#define VFIO_DMA_MAP_FLAG_NOEXEC (1 << 2) /* not executable from device */
__u64 vaddr; /* Process virtual address */
__u64 iova; /* IO virtual address */
__u64 size; /* Size of mapping (bytes) */
--
2.1.1


\
 
 \ /
  Last update: 2014-10-27 19:41    [W:0.035 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site