lkml.org 
[lkml]   [2014]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/8] mfd: max77686/802: Remove support for board files
Date
The driver is used only on Exynos based boards with DTS support.
Convert the driver to DTS-only version. This simplifies a little the
code:
1. No dead (unused) entries in platform_data structure.
2. More code removed (from all three patches: 34 insertions(+), 107
deletions).
3. Regulator driver does not depend on allocated memory
from MFD driver.
4. It makes also easier extending the regulator driver

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/mfd/max77686.c | 23 -----------------------
include/linux/mfd/max77686-private.h | 1 -
include/linux/mfd/max77686.h | 22 ----------------------
3 files changed, 46 deletions(-)

diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index 929795eae9fc..3da237afacde 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -205,24 +205,10 @@ static const struct of_device_id max77686_pmic_dt_match[] = {
{ },
};

-static struct max77686_platform_data *max77686_i2c_parse_dt_pdata(struct device
- *dev)
-{
- struct max77686_platform_data *pd;
-
- pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
- if (!pd)
- return NULL;
-
- dev->platform_data = pd;
- return pd;
-}
-
static int max77686_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct max77686_dev *max77686 = NULL;
- struct max77686_platform_data *pdata = dev_get_platdata(&i2c->dev);
const struct of_device_id *match;
unsigned int data;
int ret = 0;
@@ -233,14 +219,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
const struct mfd_cell *cells;
int n_devs;

- if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node && !pdata)
- pdata = max77686_i2c_parse_dt_pdata(&i2c->dev);
-
- if (!pdata) {
- dev_err(&i2c->dev, "No platform data found.\n");
- return -EINVAL;
- }
-
max77686 = devm_kzalloc(&i2c->dev,
sizeof(struct max77686_dev), GFP_KERNEL);
if (!max77686)
@@ -259,7 +237,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
max77686->dev = &i2c->dev;
max77686->i2c = i2c;

- max77686->wakeup = pdata->wakeup;
max77686->irq = i2c->irq;

if (max77686->type == TYPE_MAX77686) {
diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h
index 960b92ad450d..f5043490d67c 100644
--- a/include/linux/mfd/max77686-private.h
+++ b/include/linux/mfd/max77686-private.h
@@ -447,7 +447,6 @@ struct max77686_dev {
struct regmap_irq_chip_data *rtc_irq_data;

int irq;
- bool wakeup;
struct mutex irqlock;
int irq_masks_cur[MAX77686_IRQ_GROUP_NR];
int irq_masks_cache[MAX77686_IRQ_GROUP_NR];
diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h
index 553f7d09258a..ea8501dfc865 100644
--- a/include/linux/mfd/max77686.h
+++ b/include/linux/mfd/max77686.h
@@ -136,26 +136,4 @@ struct max77686_opmode_data {
int mode;
};

-struct max77686_platform_data {
- int ono;
- int wakeup;
-
- /* ---- PMIC ---- */
- struct max77686_regulator_data *regulators;
- int num_regulators;
-
- struct max77686_opmode_data *opmode_data;
-
- /*
- * GPIO-DVS feature is not enabled with the current version of
- * MAX77686 driver. Buck2/3/4_voltages[0] is used as the default
- * voltage at probe. DVS/SELB gpios are set as OUTPUT-LOW.
- */
- int buck234_gpio_dvs[3]; /* GPIO of [0]DVS1, [1]DVS2, [2]DVS3 */
- int buck234_gpio_selb[3]; /* [0]SELB2, [1]SELB3, [2]SELB4 */
- unsigned int buck2_voltage[8]; /* buckx_voltage in uV */
- unsigned int buck3_voltage[8];
- unsigned int buck4_voltage[8];
-};
-
#endif /* __LINUX_MFD_MAX77686_H */
--
1.9.1


\
 
 \ /
  Last update: 2014-10-27 17:01    [W:0.138 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site