lkml.org 
[lkml]   [2014]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 2/6] Phy: DT binding documentation for Marvell MVEBU SATA phy.
    Date
    From: Andrew Lunn <andrew@lunn.ch>

    Describe the binding for the Marvell MVEBU SATA phy. This driver
    can be used at least with Kirkwood, Dove and maybe others.
    Additionally, update the SATA binding with the properties to link
    to the phy nodes.

    Signed-off-by: Andrew Lunn <andrew@lunn.ch>
    ---
    Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++
    .../devicetree/bindings/phy/phy-mvebu.txt | 22 ++++++++++++++++++++++
    2 files changed, 28 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu.txt

    diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
    index 1c8351604d38..b460edd12766 100644
    --- a/Documentation/devicetree/bindings/ata/marvell.txt
    +++ b/Documentation/devicetree/bindings/ata/marvell.txt
    @@ -6,11 +6,17 @@ Required Properties:
    - interrupts : Interrupt controller is using
    - nr-ports : Number of SATA ports in use.

    +Optional Properties:
    +- phys : List of phandles to sata phys
    +- phy-names : Should be "0", "1", etc, one number per phandle
    +
    Example:

    sata@80000 {
    compatible = "marvell,orion-sata";
    reg = <0x80000 0x5000>;
    interrupts = <21>;
    + phys = <&sata_phy0>, <&sata_phy1>;
    + phy-names = "0", "1";
    nr-ports = <2>;
    }
    diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt
    new file mode 100644
    index 000000000000..6cb3364aeafb
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt
    @@ -0,0 +1,22 @@
    +* Marvell MVEBU SATA PHY
    +
    +Power control for the SATA phy found on Marvell MVEBU SoCs.
    +
    +This document extends the binding described in phy-bindings.txt
    +
    +Required properties :
    +
    + - reg : Offset and length of the register set for the SATA device
    + - compatible : Should be "marvell,mvebu-sata-phy"
    + - clocks : phandle of clock and specifier that supplies the device
    + - clock-names : Should be "sata"
    +
    +Example:
    + sata-phy@84000 {
    + compatible = "marvell,mvebu-sata-phy";
    + reg = <0x84000 0x0334>;
    + clocks = <&gate_clk 15>;
    + clock-names = "sata";
    + #phy-cells = <0>;
    + status = "ok";
    + };
    --
    1.9.1


    \
     
     \ /
      Last update: 2014-10-24 18:01    [W:3.130 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site