[lkml]   [2014]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCHv5 7/7] usb: dwc2: Update Kconfig to support dual-role
On Thu, 2014-10-23 at 10:05 -0500, Dinh Nguyen wrote:
> On 10/22/2014 03:27 PM, Paul Bolle wrote:
> > On Tue, 2014-10-21 at 15:47 -0500, Dinh Nguyen wrote:
> Well, CONFIG_USB enables the host stack that is needed by the DWC2
> driver, without CONFIG_USB, the DWC2 driver will not be able to build.
> >> In addition, thanks to your comment, I realized that DWC2 should also be
> >> available to build when USB_GADGET is enabled. A patch has been sent:
> >>
> >>

Doesn't that patch contradict your statement? It allows USB_DWC2 to be
set even if USB is not set.

> > I haven't checked, but doesn't this mean USB_DWC2 could just depend on
> >
> I don't think so because USB_SUPPORT will not select USB or USB_GAGDGET,
> and the DWC2 driver will need either 1 or both for it to build correctly.

My comment was not well thought through. It was a waste of your time.

Paul Bolle

 \ /
  Last update: 2014-10-23 19:41    [W:0.035 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site