Messages in this thread Patch in this message |  | | From | Grygorii Strashko <> | Subject | [PATCH v3 3/5] PM / clock_ops: add and enable clocks always if !CONFIG_PM_RUNTIME | Date | Thu, 23 Oct 2014 17:23:00 +0300 |
| |
Device's clocks need to be enabled always at probing time if !CONFIG_PM_RUNTIME - in that way, device will become accessible and, later, its clocks can be disabled/enabled during system suspend/resume by using pm_clk_suspend/pm_clk_resume APIs.
But now, the clocks management code doesn't enable clocks when clocks are being registered per-device by using pm_clk_add/_clk(). So, update pm_clk_acquire(), which is called from pm_clk_add/_clk(), to enable clocks always if !CONFIG_PM_RUNTIME.
Also, Platform PM domains drivers will not need to add code like below each time they need to handle the case when !CONFIG_PM_RUNTIME [1 - 3]:
if (!IS_ENABLED(CONFIG_PM_RUNTIME)) { ret = pm_clk_resume(dev); if (ret) { dev_err(dev, "pm_clk_resume failed %d\n", ret); goto clk_err; }; }
[1] https://lkml.org/lkml/2014/10/3/306 [2] https://lkml.org/lkml/2014/10/16/305 [3] https://lkml.org/lkml/2014/10/20/249
CC: Santosh Shilimkar <ssantosh@kernel.org> CC: Kevin Hilman <khilman@linaro.org> CC: Ulf Hansson <ulf.hansson@linaro.org> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- drivers/base/power/clock_ops.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index c3b44c1..87d07dc 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -68,6 +68,10 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce) ce->status = PCE_STATUS_ACQUIRED; dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id); } + + if (!IS_ENABLED(CONFIG_PM_RUNTIME)) { + __pm_clk_enable(dev, ce); + } } static int __pm_clk_add(struct device *dev, const char *con_id, -- 1.9.1
|  |