lkml.org 
[lkml]   [2014]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4] PCI: add kernel parameter to override devid<->driver mapping.
From
Date
On Wed, 2014-10-22 at 15:28 -0600, Bjorn Helgaas wrote:
> Hi Marcel,
Hi Bjorn,
Thank you for the review!

>
> I'm not quite clear on what the objective is here, so I apologize for
> some questions that probably seem silly.
I appreciate you took your time to go over it.

>
> On Mon, Oct 20, 2014 at 8:04 AM, Marcel Apfelbaum <marcel.a@redhat.com> wrote:
> > Scanning a lot of devices during boot requires a lot of time.
>
> I think what takes a lot of time is the .probe() method for some
> drivers, right? I first thought you meant that it took a long time
> for the PCI core to enumerate a lot of devices, but you're not
> changing anything there.
Yes indeed.

>
> If the intent is to reduce boot time, I don't think this is a general
> solution. Drivers should be able to schedule asynchronous things in
> their .probe() methods if necessary.
I agree, but sadly we cannot go over *all* existing drivers and fix,
we can of course do the best effort :)
By the way this was not the only reason as you also thought, see bellow

>
> > On other scenarios there is a need to bind a driver to a specific slot.
>
> A short example here would be good. Are you talking about something
> like binding a NIC driver to one device while leaving others unbound
> for use by guests?
Exactly! This is the "perfect" example, thanks!
>
> > Binding devices to pci-stub driver does not work,
> > as it will not differentiate between devices of the
> > same type.
>
> I assume you mean booting with "pci-stub.ids=$VENDOR:$DEVICE" will
> make pci-stub bind to *all* matching devices, and you only want it to
> bind to some.
You are right again.

> Maybe pci-stub could be extended to pay attention to
> PCI bus addresses in addition to vendor/device IDs.
A few thoughts here:
- We will have a race here between the "native" driver and pci-stub, right?
- Why not leverage the existing driver_override feature that is already
there and gives us exactly what we want: slot<->driver mapping?
- Maybe there are other scenarios that can benefit from slot<->driver mapping,
not only pci-stub.




>
> > Using some start scripts is error prone.
> >
> > The solution leverages driver_override functionality introduced by
> >
> > commit: 782a985d7af26db39e86070d28f987cad21313c0
> > Author: Alex Williamson <alex.williamson@redhat.com>
> > Date: Tue May 20 08:53:21 2014 -0600
> >
> > PCI: Introduce new device binding path using pci_dev.driver_override
> >
> > In order to bind PCI slots to specific drivers use:
> > pci=driver[xxxx:xx:xx.x]=foo,driver[xxxx:xx:xx.x]=bar,...
>
> If/when you address Alex's comments about other bus types, can you
> also update the changelog to use the canonical commit reference
> format, i.e., 782a985d7af2 ("PCI: Introduce new device binding path
> using pci_dev.driver_override") in this case?
Sure, thanks for the tip.

>
> PCI bus numbers are mutable, e.g., they can change with hotplug or
> other configuration changes. But I don't have any better suggestion,
> so I guess all we can do is be aware of this.
Well, indeed, there is so much that can be done. (We can listen to an event and remap...)

>
> Speaking of hotplug, this is only a boot-time kernel parameter, with
> no opportunity to use this, e.g., to add slot/driver pairs, after
> boot. Do you not need that because of Alex's driver_override thing?
Well actually Alex's "driver_override" feature does that for runtime
(adds slot/driver pair), the only thing missing is the boot time
mapping.

> How can we integrate this all together into a coherent whole? I'm a
> little confused as to how this would all be documented in a form
> usable by end-users.
For end-users it will be like this:
They want to create a slot/driver mapping.
In order to do that they will use the "driver_override" feature:
1. Run-time use:
- Use sysfs to edit driver_override file associated with the slot.
2. Boot-time use:
- Use the pci's driver_override parameter.

Thanks,
Marcel
>
> Bjorn





\
 
 \ /
  Last update: 2014-10-23 15:21    [W:0.095 / U:0.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site