lkml.org 
[lkml]   [2014]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/panel: s6e8aa0: Update calls to gpiod_get*()
Date
Add the new flags argument to calls of (devm_)gpiod_get*() and
remove any direction setting code afterwards.

Currently both forms (with or without the flags argument)
are valid thanks to transitional macros in
<linux/gpio/consumer.h>. These macros will be removed once
all consumers are updated and the flags argument will become
compulsary.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/drm/panel/panel-s6e8aa0.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-s6e8aa0.c b/drivers/gpu/drm/panel/panel-s6e8aa0.c
index b5217fe37f02..6427aa187735 100644
--- a/drivers/gpu/drm/panel/panel-s6e8aa0.c
+++ b/drivers/gpu/drm/panel/panel-s6e8aa0.c
@@ -1019,17 +1019,12 @@ static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
return ret;
}

- ctx->reset_gpio = devm_gpiod_get(dev, "reset");
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset-gpios %ld\n",
PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
}
- ret = gpiod_direction_output(ctx->reset_gpio, 1);
- if (ret < 0) {
- dev_err(dev, "cannot configure reset-gpios %d\n", ret);
- return ret;
- }

ctx->brightness = GAMMA_LEVEL_NUM - 1;

--
2.1.2


\
 
 \ /
  Last update: 2014-10-23 10:41    [W:2.000 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site