lkml.org 
[lkml]   [2014]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESUBMIT PATCH v4 7/8] regulator: sky81452: Add compatible string for device binding
On Wed, Oct 22, 2014 at 11:27:23AM +0100, Mark Brown wrote:
> On Mon, Oct 20, 2014 at 03:10:24PM +0900, Gyungoh Yoo wrote:
> > On Fri, Oct 17, 2014 at 04:26:05PM +0200, Mark Brown wrote:
>
> > > The thing I'm seeing is that the binding for your device with the
> > > subnode looks very much like the device trees of devices with multiple
> > > regulators. The fact that you only have one regulator is a bit
> > > difference but not that much. It seems like drivers should fit into one
> > > of two patterns: either the regulator is described in the root node for
> > > the device for single purpose devices or there should be a collection of
> > > regulators like is supported with this helper API. Having a collection
> > > with only one node doesn't seem to be a problem in any way.
>
> > Thank you for your kind comments.
> > My understanding is getting better.
>
> > For my clear understanding:
> > I think the original designed which I wanted to design is similar
> > with arizona-ldo1.c
> > It seems that this is 1st pattern your explained above.
> > Can I ask what is different between arizona-ldo1.c and
> > this sky81452-regulator.c?
> > I think both are designed under root node.
>
> Were that code being written today I'd probably be asking for it to use
> a regulators subnode to be consistent with everything else, it's a
> slightly older driver and sometimes we've not spotted the patterns when
> they're added, once we get to the point of adding the helpers as we have
> now things are definitely getting baked in.

I see. Thank you.

So, what do you think about DT like below?

sky81452@2c {
compatible = "skyworks,sky81452";
reg = <0x2c>;

backlight {
compatible = "skyworks,sky81452-backlight";
name = "pwm-backlight";
enable = <0x3F>;
ignore-pwm;
};

regulator {
compatible = "skyworks,sky81452-regulator";

lout@0 {
regulator-name = "LOUT";
regulator-min-microvolt = <4500000>;
regulator-max-microvolt = <8000000>;
};
};
};


\
 
 \ /
  Last update: 2014-10-23 05:41    [W:0.106 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site