[lkml]   [2014]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/8] phy: miphy28lp: Introduce support for MiPHY28lp
Changes in v4:
- use a generic phy header file for dt binding
- cosmetic correction
- add comments

Changes in v3:
- split into separate smaller functions and can be resued
for sata / pcie and usb
- uses macros for registers and values
- cosmetic correction

from Kishon
- create a common file for phy
- cosmetic correction in phy-miphy28lp.txt file
- change initialization of the registers
from Srinivas
- rename and simplify a procedure
- Add Tx impedance and SSC support for SATA and PCI

Hi Kishon,

The goal of this series is to add the support of MiPHY28lp Generic PHY.
I tried to be as close as possible to the MiPHY365x Lee Jones proposal.

Best Regards

Gabriel Fernandez (8):
phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp
phy: miphy28lp: Add PHY header file for DT x Driver defines
phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY
ARM: DT: STi: STiH407: Add DT node for MiPHY28lp
phy: miphy28lp: Add SSC support for SATA
phy: miphy28lp: Add SSC support for PCIE
phy: miphy28lp: Tune tx impedance across Soc cuts
ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe &

.../devicetree/bindings/phy/phy-miphy28lp.txt | 128 ++
arch/arm/boot/dts/stih407-b2120.dts | 11 +
arch/arm/boot/dts/stih407.dtsi | 65 +
arch/arm/configs/multi_v7_defconfig | 1 +
drivers/phy/Kconfig | 8 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-miphy28lp.c | 1280 ++++++++++++++++++++
include/dt-bindings/phy/phy.h | 17 +
8 files changed, 1511 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
create mode 100644 drivers/phy/phy-miphy28lp.c
create mode 100644 include/dt-bindings/phy/phy.h


 \ /
  Last update: 2014-10-22 09:41    [W:0.076 / U:9.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site