lkml.org 
[lkml]   [2014]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFC] platform: hp_accel: add a i8042 filter to remove accelerometer data
On Sat, Oct 18, 2014 at 11:59:22PM +0300, Giedrius Statkevicius wrote:
> Hello,

Hi Giedrius,

> this patch fixes bug #84941 from the kernel bugzilla. Basically, it
> seems that the accelerometer sends some signals as button presses
> through the keyboard bus. The keys in the report are 0xa5-0xa8 but in
> the filter function they are reported as 0x25-0x28. This patch adds a

Does this mean you were able to test it? On which platform did you test?

> i8042 filter that removes these scancodes from the keyboard stream in a
> similar fashion to how idealpad_sidebar.c does this. I've done a RFC
> because I'm not sure if there is more portable way to do this and if
> these codes are the same for all machines. So could please someone
> respond who uses this driver and tell which invalid keypresses appear
> (if they do) in your `dmesg` that are reported by atkbd?
>
> Also, I'm not sure if there is a publicly available documentation for hp
> 3d driveguard (I couldn't find it). That would definetly make it clear
> if this patch is correct or not.
>
> Adding a signed off by line incase you find this patch good and want to
> apply it.
>
> Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com>

As it appears this is untested and you are looking for testers, I'm going to
wait for a Tested-by from someone with hardware. Please follow-up if that fails
to happen.

More below...

> ---
> drivers/platform/x86/hp_accel.c | 42 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 41 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
> index 13e14ec..b1bea8c 100644
> --- a/drivers/platform/x86/hp_accel.c
> +++ b/drivers/platform/x86/hp_accel.c
> @@ -38,6 +38,8 @@
> #include <linux/atomic.h>
> #include <linux/acpi.h>
> #include "../../misc/lis3lv02d/lis3lv02d.h"
> +#include <linux/i8042.h>
> +#include <linux/serio.h>
>
> #define DRIVER_NAME "hp_accel"
> #define ACPI_MDPS_CLASS "accelerometer"
> @@ -73,6 +75,13 @@ static inline void delayed_sysfs_set(struct led_classdev *led_cdev,
>
> /* HP-specific accelerometer driver ------------------------------------ */
>
> +/* Codes of signals that the accelerometer sends
> + * through the keyboard bus */
> +#define ACCEL_1 0x25
> +#define ACCEL_2 0x26
> +#define ACCEL_3 0x27
> +#define ACCEL_4 0x28
> +
> /* For automatic insertion of the module */
> static const struct acpi_device_id lis3lv02d_device_ids[] = {
> {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
> @@ -82,7 +91,6 @@ static const struct acpi_device_id lis3lv02d_device_ids[] = {
> };
> MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
>
> -
> /**
> * lis3lv02d_acpi_init - ACPI _INI method: initialize the device.
> * @lis3: pointer to the device struct
> @@ -294,6 +302,32 @@ static void lis3lv02d_enum_resources(struct acpi_device *device)
> printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
> }
>
> +static bool hp_accel_i8042_filter(unsigned char data, unsigned char str,
> + struct serio *port)
> +{
> + static bool extended;
> +
> + if (str & I8042_STR_AUXDATA)
> + return false;
> +
> + if (data == 0xe0) {
> + extended = true;
> + return true;

If you are going to return, why bother setting extended?

> + }
> +
> + if (!extended)
> + return false;

I'm now confused :-)

> +
> + extended = false;

Wait... what?

Please review the use of extended here as well as the possibility
of using it uninitialized.

> + if (likely(data != ACCEL_1) && likely(data != ACCEL_2) &&
> + likely(data != ACCEL_3) && likely(data != ACCEL_4)) {
> + serio_interrupt(port, 0xe0, 0);
> + return false;
> + }
> +
> + return true;
> +}
> +
> static int lis3lv02d_add(struct acpi_device *device)
> {
> int ret;
> @@ -326,6 +360,11 @@ static int lis3lv02d_add(struct acpi_device *device)
> if (ret)
> return ret;
>
> + /* filter to remove accelerometer data from keyboard bus stream */
> + ret = i8042_install_filter(hp_accel_i8042_filter);
> + if (ret)
> + i8042_remove_filter(hp_accel_i8042_filter);

If it failed to install, you don't need to remove it afterward. See
the implementation for i8042_install_filter().

> +
> INIT_WORK(&hpled_led.work, delayed_set_status_worker);
> ret = led_classdev_register(NULL, &hpled_led.led_classdev);
> if (ret) {
> @@ -343,6 +382,7 @@ static int lis3lv02d_remove(struct acpi_device *device)
> if (!device)
> return -EINVAL;
>
> + i8042_remove_filter(hp_accel_i8042_filter);
> lis3lv02d_joystick_disable(&lis3_dev);
> lis3lv02d_poweroff(&lis3_dev);
>
> --
> 2.1.2
>
>

--
Darren Hart
Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-22 00:21    [W:1.306 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site