lkml.org 
[lkml]   [2014]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [fuse-devel] [PATCH v4 4/5] fuse: Support privileged xattrs only with a mount option
On Wed, Oct 15, 2014 at 07:37:36AM -0700, Andy Lutomirski wrote:
> On Wed, Oct 15, 2014 at 12:39 AM, Seth Forshee
> <seth.forshee@canonical.com> wrote:
> > On Tue, Oct 14, 2014 at 02:19:19PM -0700, Andy Lutomirski wrote:
> >> On Tue, Oct 14, 2014 at 2:13 PM, Eric W. Biederman
> >> <ebiederm@xmission.com> wrote:
> >> > Seth Forshee <seth.forshee@canonical.com> writes:
> >> >
> >> >> On Tue, Oct 14, 2014 at 01:01:02PM -0700, Eric W. Biederman wrote:
> >> >>> Michael j Theall <mtheall@us.ibm.com> writes:
> >> >>>
> >> >>> > Seth Forshee <seth.forshee@canonical.com> wrote on 10/14/2014 09:25:55 AM:
> >> >>> >
> >> >>> >> From: Seth Forshee <seth.forshee@canonical.com>
> >> >>> >> To: Miklos Szeredi <miklos@szeredi.hu>
> >> >>> >> Cc: fuse-devel@lists.sourceforge.net, "Serge H. Hallyn"
> >> >>> >> <serge.hallyn@ubuntu.com>, linux-kernel@vger.kernel.org, Seth
> >> >>> >> Forshee <seth.forshee@canonical.com>, "Eric W. Biederman"
> >> >>> >> <ebiederm@xmission.com>, linux-fsdevel@vger.kernel.org
> >> >>> >> Date: 10/14/2014 09:27 AM
> >> >>> >> Subject: [fuse-devel] [PATCH v4 4/5] fuse: Support privileged xattrs
> >> >>> >> only with a mount option
> >> >>> >>
> >> >>> >> Allowing unprivileged users to provide arbitrary xattrs via fuse
> >> >>> >> mounts bypasses the normal restrictions on setting xattrs. Such
> >> >>> >> mounts should be restricted to reading and writing xattrs in the
> >> >>> >> user.* namespace.
> >> >>> >>
> >> >>> >
> >> >>> > Can you explain how the normal restrictions on setting xattrs are
> >> >>> > bypassed?
> >> >>>
> >> >>> If the fuse server is not run by root. Which is a large part of the
> >> >>> point of fuse.
> >> >>
> >> >> So the server could for example return trusted.* xattrs which were not
> >> >> set by a privileged user.
> >> >>
> >> >>> > My filesystem still needs security.* and system.*, and it looks like
> >> >>> > xattr_permission already prevents non-privileged users from accessing
> >> >>> > trusted.*
> >> >>>
> >> >>> If the filesystem is mounted with nosuid (typical of a non-privileged
> >> >>> mount of fuse) then the security.* attributes are ignored.
> >> >>
> >> >> That I wasn't aware of. In fact I still haven't found where this
> >> >> restriction is implemented.
> >> >
> >> > My memory may be have been incomplete. What I was thinking of is
> >> > security/commoncap.c the MNT_NOSUID check in get_file_caps.
> >> >
> >> > Upon inspection that appears limited to file capabilities, and while
> >> > there are a few other MNT_NOSUID checks under security the feel far from
> >> > complete.
> >> >
> >> > Sigh.
> >> >
> >> > This deserves a hard look because if MNT_NOSUID is not sufficient than
> >> > it may be possible for me to insert a usb stick with an extN filesystem
> >> > with the right labels having it auto-mounted nosuid and subvert the
> >> > security of something like selinux.
> >>
> >> It's this code in selinux/hooks.c:
> >>
> >> if ((bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID) ||
> >> (bprm->unsafe & LSM_UNSAFE_NO_NEW_PRIVS))
> >> new_tsec->sid = old_tsec->sid;
> >>
> >>
> >> One might argue that this should actually generate -EPERM instead of
> >> ignoring the label, but it should be safe against untrusted media.
> >>
> >> >
> >> >> Nonetheless, a userns mount could be done without nosuid (though that
> >> >> mount will also be unaccessible outside of that namespace).
> >> >>
> >> >>> >> It's difficult though to tell whether a mount is being performed
> >> >>> >> on behalf of an unprivileged user since fuse mounts are ususally
> >> >>> >> done via a suid root helper. Thus a new mount option,
> >> >>> >> privileged_xattrs, is added to indicated that xattrs from other
> >> >>> >> namespaces are allowed. This option can only be supplied by
> >> >>> >> system-wide root; supplying the option as an unprivileged user
> >> >>> >> will cause the mount to fail.
> >> >>> >
> >> >>> > I can't say I'm convinced that this is the right direction to head.
> >> >>>
> >> >>> With respect to defaults we could keep the current default if you
> >> >>> have the global CAP_SYS_ADMIN privilege when the mount takes place
> >> >>> and then avoid breaking anything.
> >> >>
> >> >> Except that unprivileged mounts are normally done by a suid root helper,
> >> >> which is why I've required both global CAP_SYS_ADMIN and a mount option
> >> >> to get the current default behavior.
> >> >
> >> > If nosuid is sufficient that may break existing setups for no good
> >> > reason.
> >> >
> >> > Shrug. I won't have much time for a bit but I figured I would highlight
> >> > the potential security hole in existing setups. So someone with time
> >> > this week can look at that.
> >>
> >> I think I have a better solution. I'll send it out.
> >
> > To be honest I don't understand enough about how selinux uses security
> > labels to know what level of paranoia is appropriate, so I wrote this
> > out of an excess of paranoia. If the patch you sent restricts things
> > sufficiently then I'm perfectly happy to see this patch dropped.
> >
> > And really with fuse all of this is really excess paranoia because (if
> > my other patches are applied at least) the fuse mount will be
> > inaccessible to any user outside the user namespace from which it was
> > mounted or its descendants.
> >
>
> I missed the rest of the series. This is exciting!
>
> I'm not sure that the other protections you have are quite sufficient,
> though, without something like my patch. I'll comment on the rest.

I still suspect we should be doing more to limit xattrs from userns
mounts, since normally only root is allowed to set trusted.* and
security.* xattrs. Seems like this should be done more generally though
and not just specific to fuse. Something like this maybe? It probably
won't matter much for fuse mounts since they won't be accessible outside
the userns which did the mount, but for other filesystems the xattrs
could be set externally and injected into the system via a userns mount.


diff --git a/fs/super.c b/fs/super.c
index eae088f6aaae..499cd7d2d2f8 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -149,6 +149,7 @@ static void destroy_super(struct super_block *s)
percpu_counter_destroy(&s->s_writers.counter[i]);
security_sb_free(s);
WARN_ON(!list_empty(&s->s_mounts));
+ put_user_ns(s->s_user_ns);
kfree(s->s_subtype);
kfree(s->s_options);
kfree_rcu(s, rcu);
@@ -230,6 +231,8 @@ static struct super_block *alloc_super(struct file_system_type *type, int flags)
s->s_shrink.count_objects = super_cache_count;
s->s_shrink.batch = 1024;
s->s_shrink.flags = SHRINKER_NUMA_AWARE;
+
+ s->s_user_ns = get_user_ns(&init_user_ns);
return s;

fail:
diff --git a/fs/xattr.c b/fs/xattr.c
index 64e83efb742d..383bb9f25555 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -40,6 +40,12 @@ xattr_permission(struct inode *inode, const char *name, int mask)
return -EPERM;
}

+ /* Restrict security.* and trusted.* to mounts from init_user_ns. */
+ if (inode->i_sb->s_user_ns != &init_user_ns &&
+ (!strcmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) ||
+ !strcmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN)))
+ return -EPERM;
+
/*
* No restriction for security.* and system.* from the VFS. Decision
* on these is left to the underlying filesystem / security module.
diff --git a/include/linux/fs.h b/include/linux/fs.h
index a957d4366c24..786c5e9c845f 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1259,6 +1259,8 @@ struct super_block {
struct workqueue_struct *s_dio_done_wq;
struct hlist_head s_pins;

+ struct user_namespace *s_user_ns;
+
/*
* Keep the lru lists last in the structure so they always sit on their
* own individual cachelines.

\
 
 \ /
  Last update: 2014-10-22 00:01    [W:1.317 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site