lkml.org 
[lkml]   [2014]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: phram: Allow multiple phram devices on cmd line
+ linux-mtd

On Tue, Oct 21, 2014 at 07:03:23PM +0100, Rob Ward wrote:
> From 9ddd010f1e2bf4fdfac5a7627c5de821a2dcd8f5 Mon Sep 17 00:00:00 2001
> From: Rob Ward <robert.ward114@googlemail.com>
> Date: Tue, 21 Oct 2014 17:46:53 +0100
> Subject: [PATCH] mtd: phram: Allow multiple phram devices on cmd line
>
> Allow the phram module the ability to create multiple phram mtd
> devices via the kernel command line.
>
> Currently the phram module only allows a single mtd device to be
> created via the kernel command line. This is due to the phram
> module having to store the values until it is initialised
> later. This storage is done using a single char[] meaning when
> the module_param_call is made the previous value is overidden.
>
> This change modifies the phram system to use a char[][] allowing
> multiple devices to be created.
>
> The array currently allows up to 64 devices to be created via the
> kernel command line.
>
> If the array is full a message is printed to the console and the
> module_param_call returns.
>
> To test, in all cases an area of memory needs to be reserved via
> the command line e.g. memmap=10M$114M
>
> To test with phram build into the kernel on the command line add
> the following:
>
> phram.phram=alpha,114Mi,1Mi phram.phram=beta,115Mi,1Mi
>
> To test phram built as a module insmod with the following arguments:
>
> phram=gamma,114Mi,1Mi phram=delta,115Mi,1Mi
>
> In both cases two mtd devices should be created.
>
> Signed-off-by: Rob Ward <robert.ward114@googlemail.com>
> ---
> drivers/mtd/devices/phram.c | 41 ++++++++++++++++++++++++++++++++++++-----
> 1 file changed, 36 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
> index effd9a4..bd409be 100644
> --- a/drivers/mtd/devices/phram.c
> +++ b/drivers/mtd/devices/phram.c
> @@ -214,7 +214,7 @@ static int phram_init_called;
> * size.
> * Example: phram.phram=rootfs,0xa0000000,512Mi
> */
> -static char phram_paramline[64 + 20 + 20];
> +static char phram_paramline[64][64 + 20 + 20];
> #endif
>
> static int phram_setup(const char *val)
> @@ -271,6 +271,9 @@ static int phram_param_call(const char *val, struct kernel_param *kp)
> #ifdef MODULE
> return phram_setup(val);
> #else
> + int paramline_it = 0;
> + int arraysize = 0;
> +
> /*
> * If more parameters are later passed in via
> * /sys/module/phram/parameters/phram
> @@ -290,9 +293,27 @@ static int phram_param_call(const char *val, struct kernel_param *kp)
> * phram_setup().
> */
>
> - if (strlen(val) >= sizeof(phram_paramline))
> + if (strlen(val) >= sizeof(phram_paramline[0]))
> return -ENOSPC;
> - strcpy(phram_paramline, val);
> +
> + arraysize = sizeof(phram_paramline)/sizeof(phram_paramline[0]);
> +
> + /*
> + * Check if any space is left in the array. If no space
> + * is left then print warning and return 0
> + */
> +
> + if (phram_paramline[arraysize - 1][0]) {
> + pr_warn("exceeded limit via cmd_line - %s ignored", val);
> + return 0;
> + }
> +
> + for (paramline_it = 0; paramline_it <= arraysize; paramline_it++) {
> + if (!phram_paramline[paramline_it][0]) {
> + strcpy(phram_paramline[paramline_it], val);
> + break;
> + }
> + }
>
> return 0;
> #endif
> @@ -307,8 +328,18 @@ static int __init init_phram(void)
> int ret = 0;
>
> #ifndef MODULE
> - if (phram_paramline[0])
> - ret = phram_setup(phram_paramline);
> + int arraysize = 0;
> + int paramline_it = 0;
> +
> + arraysize = sizeof(phram_paramline)/sizeof(phram_paramline[0]);
> +
> + for (paramline_it = 0; paramline_it <= arraysize; paramline_it++) {
> + if (phram_paramline[paramline_it][0]) {
> + ret = phram_setup(phram_paramline[paramline_it]);
> + if (ret)
> + break;
> + }
> + }
> phram_init_called = 1;
> #endif
>
> --
> 2.0.2
>


\
 
 \ /
  Last update: 2014-10-21 21:01    [W:0.128 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site