lkml.org 
[lkml]   [2014]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/20] rtc: omap: use dev_info
Date
Use dev_info rather than pr_info.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/rtc/rtc-omap.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index c750678de652..dbb88e46c25d 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -427,8 +427,7 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
/* clear old status */
reg = rtc_read(OMAP_RTC_STATUS_REG);
if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
- pr_info("%s: RTC power up reset detected\n",
- pdev->name);
+ dev_info(&pdev->dev, "RTC power up reset detected\n");
rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
}
if (reg & (u8) OMAP_RTC_STATUS_ALARM)
@@ -437,7 +436,7 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
reg = rtc_read(OMAP_RTC_CTRL_REG);
if (reg & (u8) OMAP_RTC_CTRL_STOP)
- pr_info("%s: already running\n", pdev->name);
+ dev_info(&pdev->dev, "already running\n");

/* force to 24 hour mode */
new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP);
@@ -458,7 +457,7 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
*/

if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT)
- pr_info("%s: split power mode\n", pdev->name);
+ dev_info(&pdev->dev, "split power mode\n");

if (reg != new_ctrl)
rtc_write(new_ctrl, OMAP_RTC_CTRL_REG);
--
2.0.4


\
 
 \ /
  Last update: 2014-10-21 20:21    [W:0.853 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site