lkml.org 
[lkml]   [2014]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/12] Tegra124 EMC (external memory controller) support
Date
Hello,

in this v2 you can find these changes:

* rebased on top of v3.18-rc1

* make sure the DT bindings documentation is complete

* clarified a few confusing aspects of the DT bindings

* get the probing order right by means of subsys_initcall()

* register correctly the EMC clock so the provider knows about it

* don't try to re-set the same rate, as the hw doesn't like it

It depends on Thierry's MC patches at [0] and a branch can be found at [1]. So
far it has been tested only on a Jetson TK1.

Patch 1: Removes the old EMC clock, that was unused and not functional

Patch 2: Documents bindings for the new long-ram-code property

Patch 3: Adds API for reading the ram code

Patches 4 to 6: Document OF additions

Patch 7: Adds EMC node to Tegra124 DT

Patch 8: Adds timings for Jetson TK1 board

Patch 9: Adds functions to the MC driver so the EMC driver can stay within its
own registers

Patch 10: Adds the actual EMC driver, making use of the new MC API

Patch 11: Adds EMC clock driver, making use of API provided by the EMC driver

Patch 12: Adds debugfs entry for getting and setting the EMC rate

Regards,

Tomeu

[0] https://github.com/thierryreding/linux/commits/staging/iommu
[1] http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=emc-v2

Mikko Perttunen (8):
clk: tegra124: Remove old emc clock
soc/tegra: Add ram code reader helper
of: Add Tegra124 EMC bindings
ARM: tegra: Add EMC to Tegra124 device tree
ARM: tegra: Add EMC timings to Jetson TK1 device tree
memory: tegra: Add API needed by the EMC driver
memory: tegra: Add EMC (external memory controller) driver
clk: tegra: Add EMC clock driver

Tomeu Vizoso (4):
of: Document long-ram-code property in nvidia,tegra20-apbmisc
of: document new emc-timings subnode in nvidia,tegra124-car
of: Document timings subnode of nvidia,tegra-mc
memory: tegra: Add debugfs entry for getting and setting the EMC rate

.../bindings/clock/nvidia,tegra124-car.txt | 46 +-
.../memory-controllers/nvidia,tegra-mc.txt | 46 +-
.../bindings/memory-controllers/tegra-emc.txt | 118 +
.../bindings/misc/nvidia,tegra20-apbmisc.txt | 3 +
arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi | 2412 ++++++++++++++++++++
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +
arch/arm/boot/dts/tegra124.dtsi | 7 +
drivers/clk/tegra/Makefile | 2 +-
drivers/clk/tegra/clk-emc.c | 454 ++++
drivers/clk/tegra/clk-tegra124.c | 5 +-
drivers/clk/tegra/clk.h | 2 +
drivers/memory/Kconfig | 10 +
drivers/memory/Makefile | 1 -
drivers/memory/tegra/Makefile | 1 +
drivers/memory/tegra/tegra-mc.c | 172 ++
drivers/memory/tegra/tegra124-emc.c | 1169 ++++++++++
drivers/soc/tegra/fuse/tegra-apbmisc.c | 19 +
include/soc/tegra/fuse.h | 1 +
include/soc/tegra/memory.h | 19 +
19 files changed, 4481 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
create mode 100644 arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
create mode 100644 drivers/clk/tegra/clk-emc.c
create mode 100644 drivers/memory/tegra/tegra124-emc.c
create mode 100644 include/soc/tegra/memory.h

--
1.9.3



\
 
 \ /
  Last update: 2014-10-21 17:21    [W:0.066 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site