Messages in this thread | | | From | Krzysztof Kozlowski <> | Subject | [PATCH v3 0/4] regulator: max77686/trats2: Disable some regulators in suspend | Date | Tue, 21 Oct 2014 15:19:51 +0200 |
| |
Hi,
Changes since v2 ================ 1. Patch 1/4: Fully describe different values used for controlling the regulators (low power modes, enable, disable). Remove "opmode" from new defines. Suggested by Javier. 2. Patch 2/4: minor nits after changing patch 1. 3. Add Javier's reviewed-by to 2, 3 and 4 patch. 4. Patch 3/4 (changes in documentation) should be picked up by Lee Jones but I'm resending it anyway.
Changes since v1 ================ 1. Add patch 1/4 and 3/4. 2. Patch 2/4: Extend existing set_suspend_disable (for bucks) with LDO support. Implement set_suspend_enable. Suggested by Javier. 3. Patch 4/4: Add regulator suspend properties only to regulators actually supporting this. Other regulators, not implementing suspend enable/disable, will warn ("VCC_1.8V_IO: No configuration"). 4. Patch 4/4: In suspend enable VHSIC_1.0V and VHSIC_1.8V regulators. Suggested by Chanwoo Choi.
Description =========== This patchset makes use of Javier Martinez Cainllas changes [1]. It allows disabling some of the regulators during suspend to RAM.
Javier's patchset is necessary only to test it.
[1] [PATCH v3 0/2] ARM: EXYNOS: Call regulator suspend prepare/finish https://lkml.org/lkml/2014/10/20/545
Best regards, Krzysztof
Krzysztof Kozlowski (4): regulator: max77686: Replace hard-coded opmode values with defines regulator: max77686: Implement suspend disable for some LDOs mfd/regulator: dt-bindings: max77686: Document regulators off in suspend ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators
Documentation/devicetree/bindings/mfd/max77686.txt | 6 ++ arch/arm/boot/dts/exynos4412-trats2.dts | 72 ++++++++++++--------- drivers/regulator/max77686.c | 73 ++++++++++++++++++---- 3 files changed, 108 insertions(+), 43 deletions(-)
-- 1.9.1
| |