[lkml]   [2014]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/4] regulator: max77686/trats2: Disable some regulators in suspend

Changes since v1
1. Add patch 1/4 and 3/4.
2. Patch 2/4: Extend existing set_suspend_disable (for bucks) with
LDO support. Implement set_suspend_enable. Suggested by Javier.
3. Patch 4/4: Add regulator suspend properties only to regulators
actually supporting this. Other regulators, not implementing
suspend enable/disable, will warn ("VCC_1.8V_IO: No configuration").
4. Patch 4/4: In suspend enable VHSIC_1.0V and VHSIC_1.8V regulators.
Suggested by Chanwoo Choi.

This patchset makes use of Javier Martinez Cainllas changes [1].
It allows disabling some of the regulators during suspend to RAM.

Javier's patchset is necessary only to test it.

[1] [PATCH v3 0/2] ARM: EXYNOS: Call regulator suspend prepare/finish

Best regards,

Krzysztof Kozlowski (4):
regulator: max77686: Replace hard-coded opmode values with defines
regulator: max77686: Implement suspend disable for some LDOs
mfd/regulator: dt-bindings: max77686: Document regulators off in
ARM: dts: exynos4412-trats: Add suspend configuration for max77686

Documentation/devicetree/bindings/mfd/max77686.txt | 6 ++
arch/arm/boot/dts/exynos4412-trats2.dts | 72 +++++++++++++---------
drivers/regulator/max77686.c | 58 +++++++++++++----
3 files changed, 94 insertions(+), 42 deletions(-)


 \ /
  Last update: 2014-10-21 13:41    [W:0.081 / U:5.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site