lkml.org 
[lkml]   [2014]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] Add DRA7xx CPSW Ethernet support in Device Tree
Date
Adding device tree entry for CPSW to make it work in Dual EMAC mode.
These patches were tested with DRA7 hwmod patches on top of linux-next.
Patches are tested on top of Nishanth's PM tree for v3.17 [1] and pushed
my tree to [2].

Did a boot test with CPSW and ping test with suspend/resume, the boot logs
on DRA7xx EVM are posted at [3]

[1] git://github.com/nmenon/linux-2.6-playground.git testing/v3.17/cpu-idle-suspend-dra7-omap5-framework
[2] git://git.ti.com/~mugunthanvnm/ti-linux-kernel/linux.git v3.17/dra7-evm-cpsw-v3
[3] http://pastebin.ubuntu.com/8613072/

Changes from v2:
* Changed pinctrl comments to hold mode0-name.mode-selected-name
* Changes slave numbers in the pinctrl comments
* Added cpsw and cpts clocks

Changes from initial version:
* Dropped patch for pinoff states
* Changed pinoff state to mode15

Mugunthan V N (2):
ARM: dts: dra7: Add CPSW and MDIO module nodes for dra7
ARM: dts: dra7-evm: Enable CPSW and MDIO for dra7xx EVM

arch/arm/boot/dts/dra7-evm.dts | 106 +++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/dra7.dtsi | 61 ++++++++++++++++++++++++
2 files changed, 167 insertions(+)

--
2.1.2.484.g13da0fc



\
 
 \ /
  Last update: 2014-10-21 12:41    [W:0.093 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site