lkml.org 
[lkml]   [2014]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 16/16] usb: dwc3: enable usb suspend phy
On Fri, Oct 17, 2014 at 01:48:19PM -0500, Felipe Balbi wrote:
> Hi,
>
> On Fri, Oct 17, 2014 at 06:41:04PM +0000, Paul Zimmerman wrote:
> > > From: Felipe Balbi [mailto:balbi@ti.com]
> > > Sent: Friday, October 17, 2014 8:00 AM
> > >
> > > On Fri, Oct 17, 2014 at 04:53:41PM +0800, Huang Rui wrote:
> > > > AMD NL needs to suspend usb3 ss phy, but this doesn't enable on simulation
> > > > board.
> > > >
> > > > Signed-off-by: Huang Rui <ray.huang@amd.com>
> > > > ---
> > > > drivers/usb/dwc3/core.c | 7 ++++++-
> > > > drivers/usb/dwc3/dwc3-pci.c | 3 ++-
> > > > drivers/usb/dwc3/platform_data.h | 1 +
> > > > 3 files changed, 9 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > > > index 3ccfe41..4a98696 100644
> > > > --- a/drivers/usb/dwc3/core.c
> > > > +++ b/drivers/usb/dwc3/core.c
> > > > @@ -395,6 +395,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
> > > > if (dwc->quirks & DWC3_QUIRK_TX_DEEPH)
> > > > reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(1);
> > > >
> > > > + if (dwc->quirks & DWC3_QUIRK_SUSPHY)
> > >
> > > should be:
> > >
> > > if (!dwc->suspend_usb3_phy_quirk)
> > >
> > > > + reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> > >
> > > IIRC, databook asks us to set that bit anyway, so the quirk is disabling
> > > that bit. Am I missing something ? Paul ?
> >
> > It looks to me that Huang's patch is enabling that bit, not disabling
> > it.
>
> right, but that's what's actually quirky right ? IIRC, Databook asks us
> to set usb2 and usb3 suspend phy bits and we're just not doing it.
>
> > Currently the driver does not set either DWC3_GUSB3PIPECTL_SUSPHY or
> > DWC3_GUSB2PHYCFG_SUSPHY (unless it has been added by that big patch
> > series you just posted). According to the databook, both of those
> > bits should be set to 1 after the core initialization has completed.
>
> there you go. So unless that quirk bit flag is set, we're safe of
> setting SUSPHY bit for everybody.
>

So I can update to set these two suspend phy bits defaultly in my next
patch set, is it OK? :)

Thanks,
Rui

> > So I think the driver should be changed to enable both of those by
> > default, and then maybe you want quirks to disable them if there is
> > some platform out there which needs that.
>
> Yeah, that's what I thought too :-) Thanks for confirming
>
> --
> balbi


\
 
 \ /
  Last update: 2014-10-20 11:21    [W:0.099 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site