lkml.org 
[lkml]   [2014]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator
From
Date
On Tue, 2014-10-21 at 02:28 +0300, Vladimir Zapolskiy wrote:
> On 19.10.2014 17:16, LABBE Corentin wrote:
> > Add support for the Security System included in Allwinner SoC A20.
> > The Security System is a hardware cryptographic accelerator that support AES/MD5/SHA1/DES/3DES/PRNG algorithms.
[]
> > diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-core.c b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
[]
> > + cr = clk_get_rate(ss->busclk);
> > + if (cr >= cr_ahb)
> > + dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
> > + cr, cr / 1000000, cr_ahb);
> > + else
> > + dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
> > + cr, cr / 1000000, cr_ahb);
>
> See next comment.
>
> > + cr = clk_get_rate(ss->ssclk);
> > + if (cr <= cr_mod)
> > + if (cr < cr_mod)
> > + dev_info(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
> > + cr, cr / 1000000, cr_mod);
> > + else
> > + dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
> > + cr, cr / 1000000, cr_mod);
> > + else
> > + dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n",
> > + cr, cr / 1000000, cr_mod);
>
> The management of kernel log levels looks pretty strange. As far as I
> understand there is no error on any clock rate, I'd recommend to keep
> only one information message.

And if not, please add some braces.

> hash_init: initialize request context */
> > +int sunxi_hash_init(struct ahash_request *areq)
> > +{
> > + const char *hash_type;
> > + struct sunxi_req_ctx *op = ahash_request_ctx(areq);
> > +
> > + memset(op, 0, sizeof(struct sunxi_req_ctx));
> > +
> > + hash_type = crypto_tfm_alg_name(areq->base.tfm);
> > +
> > + if (strcmp(hash_type, "sha1") == 0)
> > + op->mode = SS_OP_SHA1;
> > + if (strcmp(hash_type, "md5") == 0)
> > + op->mode = SS_OP_MD5;

else if ?

> > + if (op->mode == 0)
> > + return -EINVAL;

maybe this?

if (!strcmp(hash_type, "sha1"))
op->mode = SS_OP_SHA1;
else if (!strcmp(hash_type, "md5"))
op->mode = SH_OP_MD5;
else
return -EINVAL;

> > +
> > + return 0;
> > +}
[]
> > +int sunxi_hash_update(struct ahash_request *areq)
> > +{
[]
> > + dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x bw=%u ww=%u",
> > + __func__, crypto_tfm_alg_name(areq->base.tfm),
> > + op->byte_count, areq->nbytes, op->mode,
> > + op->nbw, op->nwait);

dev_dbg statements generally don't need __func__ as
dynamic_debug can add it.

If you want to keep it, the most common output form for
__func__ is '"%s: ...", __func__'



\
 
 \ /
  Last update: 2014-10-21 02:01    [W:0.118 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site