lkml.org 
[lkml]   [2014]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] pinctrl: rockchip: Set wake_enabled
Date
The rockchip pinctrl driver uses irq_gc_set_wake() but doesn't setup
the .wake_enabled member. That means that we can never actually use a
pin for wakeup. When "irq_set_irq_wake()" tries to call through it
will always get a failure from set_irq_wake_real() and will then set
wake_depth to 0. Assuming you can resume you'll later get an error
message about "Unbalanced IRQ x wake disable".

Signed-off-by: Doug Anderson <dianders@chromium.org>
---
drivers/pinctrl/pinctrl-rockchip.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 016f457..230d8f3 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1563,6 +1563,7 @@ static int rockchip_interrupts_register(struct platform_device *pdev,
gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake;
gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type;
+ gc->wake_enabled = IRQ_MSK(bank->nr_pins);

irq_set_handler_data(bank->irq, bank);
irq_set_chained_handler(bank->irq, rockchip_irq_demux);
--
2.1.0.rc2.206.gedb03e5


\
 
 \ /
  Last update: 2014-10-21 01:41    [W:0.064 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site