lkml.org 
[lkml]   [2014]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mm: cma: split cma-reserved in dmesg log
On Mon, 20 Oct 2014 13:03:10 +0530 Pintu Kumar <pintu.k@samsung.com> wrote:

> When the system boots up, in the dmesg logs we can see
> the memory statistics along with total reserved as below.
> Memory: 458840k/458840k available, 65448k reserved, 0K highmem
>
> When CMA is enabled, still the total reserved memory remains the same.
> However, the CMA memory is not considered as reserved.
> But, when we see /proc/meminfo, the CMA memory is part of free memory.
> This creates confusion.
> This patch corrects the problem by properly substracting the CMA reserved
> memory from the total reserved memory in dmesg logs.
>
> Below is the dmesg snaphot from an arm based device with 512MB RAM and
> 12MB single CMA region.
>
> Before this change:
> Memory: 458840k/458840k available, 65448k reserved, 0K highmem
>
> After this change:
> Memory: 458840k/458840k available, 53160k reserved, 12288k cma-reserved, 0K highmem
>
> ...
>
> --- a/include/linux/swap.h
> +++ b/include/linux/swap.h
> @@ -295,6 +295,9 @@ static inline void workingset_node_shadows_dec(struct radix_tree_node *node)
> /* linux/mm/page_alloc.c */
> extern unsigned long totalram_pages;
> extern unsigned long totalreserve_pages;
> +#ifdef CONFIG_CMA
> +extern unsigned long totalcma_pages;
> +#endif

We don't actually need the ifdefs here - the kernel will compile OK
without them. This means that a programming error will result in a
link-time error rather than a compile-time error but that's a pretty
small cost to pay for keeping the header files neater.

> extern unsigned long dirty_balance_reserve;
> extern unsigned long nr_free_buffer_pages(void);
> extern unsigned long nr_free_pagecache_pages(void);
> diff --git a/mm/cma.c b/mm/cma.c
> index 963bc4a..73fe7be 100644
> --- a/mm/cma.c
> +++ b/mm/cma.c
> @@ -45,6 +45,7 @@ struct cma {
> static struct cma cma_areas[MAX_CMA_AREAS];
> static unsigned cma_area_count;
> static DEFINE_MUTEX(cma_mutex);
> +unsigned long totalcma_pages __read_mostly;

This could+should be __initdata.

> phys_addr_t cma_get_base(struct cma *cma)
> {
> @@ -288,6 +289,7 @@ int __init cma_declare_contiguous(phys_addr_t base,
> if (ret)
> goto err;
>
> + totalcma_pages += (size / PAGE_SIZE);
> pr_info("Reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M,
> (unsigned long)base);
> return 0;
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index dd73f9a..c6165ac 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -5521,6 +5521,9 @@ void __init mem_init_print_info(const char *str)
> pr_info("Memory: %luK/%luK available "
> "(%luK kernel code, %luK rwdata, %luK rodata, "
> "%luK init, %luK bss, %luK reserved"
> +#ifdef CONFIG_CMA
> + ", %luK cma-reserved"
> +#endif
> #ifdef CONFIG_HIGHMEM
> ", %luK highmem"
> #endif
> @@ -5528,7 +5531,12 @@ void __init mem_init_print_info(const char *str)
> nr_free_pages() << (PAGE_SHIFT-10), physpages << (PAGE_SHIFT-10),
> codesize >> 10, datasize >> 10, rosize >> 10,
> (init_data_size + init_code_size) >> 10, bss_size >> 10,
> +#ifdef CONFIG_CMA
> + (physpages - totalram_pages - totalcma_pages) << (PAGE_SHIFT-10),
> + totalcma_pages << (PAGE_SHIFT-10),
> +#else
> (physpages - totalram_pages) << (PAGE_SHIFT-10),
> +#endif
> #ifdef CONFIG_HIGHMEM
> totalhigh_pages << (PAGE_SHIFT-10),
> #endif

Do we really need any of the ifdefs? A non-CMA kernel will print "0K
cma-reserved" but is that harmful?

This is all __init code so the additional code bloat isn't a
significant issue.



\
 
 \ /
  Last update: 2014-10-21 01:01    [W:0.160 / U:4.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site