lkml.org 
[lkml]   [2014]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH 1/1] e1000: unset IFF_UNICAST_FLT on WMware 82545EM
From
VMWare's e1000 implementation does not seem to support unicast filtering.
This can be observed by configuring a macvlan interface on eth0 in a VM in
VMWare Fusion 5.0.5, and trying to use that interface instead of eth0.
Tested on 3.16.

Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
---
drivers/net/ethernet/intel/e1000/e1000_main.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 5f6aded..24f3986 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -1075,7 +1075,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
NETIF_F_HW_CSUM |
NETIF_F_SG);

- netdev->priv_flags |= IFF_UNICAST_FLT;
+ /* Do not set IFF_UNICAST_FLT for VMWare's 82545EM */
+ if (hw->device_id != E1000_DEV_ID_82545EM_COPPER ||
+ hw->subsystem_vendor_id != PCI_VENDOR_ID_VMWARE)
+ netdev->priv_flags |= IFF_UNICAST_FLT;

adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);

--
1.8.1.4


\
 
 \ /
  Last update: 2014-10-21 00:21    [W:0.250 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site