lkml.org 
[lkml]   [2014]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] input: stmpe: enforce device tree only mode
On Sat, 18 Oct 2014, Linus Walleij wrote:

> The STMPE keypad controller is only used with device tree
> configured systems, so force the configuration to come from
> device tree only, and now actually get the rows and cols from
> the device tree too.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> .../devicetree/bindings/input/stmpe-keypad.txt | 2 +
> drivers/input/keyboard/Kconfig | 1 +
> drivers/input/keyboard/stmpe-keypad.c | 104 +++++++++------------
> include/linux/mfd/stmpe.h | 20 ----
> 4 files changed, 48 insertions(+), 79 deletions(-)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
> index 1b97222e8a0b..12bb771d66d4 100644
> --- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt
> +++ b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
> @@ -8,6 +8,8 @@ Optional properties:
> - debounce-interval : Debouncing interval time in milliseconds
> - st,scan-count : Scanning cycles elapsed before key data is updated
> - st,no-autorepeat : If specified device will not autorepeat
> + - keypad,num-rows : See ./matrix-keymap.txt
> + - keypad,num-columns : See ./matrix-keymap.txt
>
> Example:
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index a3958c63d7d5..753d61c0a3a9 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -559,6 +559,7 @@ config KEYBOARD_SH_KEYSC
> config KEYBOARD_STMPE
> tristate "STMPE keypad support"
> depends on MFD_STMPE
> + depends on OF
> select INPUT_MATRIXKMAP
> help
> Say Y here if you want to use the keypad controller on STMPE I/O
> diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
> index ef5e67fb567e..d46391f48310 100644
> --- a/drivers/input/keyboard/stmpe-keypad.c
> +++ b/drivers/input/keyboard/stmpe-keypad.c
> @@ -45,7 +45,7 @@
> #define STMPE_KEYPAD_MAX_ROWS 8
> #define STMPE_KEYPAD_MAX_COLS 8
> #define STMPE_KEYPAD_ROW_SHIFT 3
> -#define STMPE_KEYPAD_KEYMAP_SIZE \
> +#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
> (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
>
> /**
> @@ -99,16 +99,30 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
> },
> };
>
> +/**
> + * struct stmpe_keypad - STMPE keypad state container
> + * @stmpe: pointer to parent STMPE device
> + * @input: spawned input device
> + * @variant: STMPE variant
> + * @debounce_ms: debounce interval, in ms. Maximum is
> + * %STMPE_KEYPAD_MAX_DEBOUNCE.
> + * @scan_count: number of key scanning cycles to confirm key data.
> + * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
> + * @no_autorepeat: disable key autorepeat
> + * @rows: bitmask for the rows
> + * @cols: bitmask for the columns
> + * @keymap: the keymap
> + */
> struct stmpe_keypad {
> struct stmpe *stmpe;
> struct input_dev *input;
> const struct stmpe_keypad_variant *variant;
> - const struct stmpe_keypad_platform_data *plat;
> -
> + unsigned int debounce_ms;
> + unsigned int scan_count;
> + bool no_autorepeat;
> unsigned int rows;
> unsigned int cols;
> -
> - unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
> + unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
> };
>
> static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
> @@ -208,15 +222,14 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
>
> static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
> {
> - const struct stmpe_keypad_platform_data *plat = keypad->plat;
> const struct stmpe_keypad_variant *variant = keypad->variant;
> struct stmpe *stmpe = keypad->stmpe;
> int ret;
>
> - if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
> + if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
> return -EINVAL;
>
> - if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
> + if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
> return -EINVAL;
>
> ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
> @@ -245,7 +258,7 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
>
> ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
> STMPE_KPC_CTRL_MSB_SCAN_COUNT,
> - plat->scan_count << 4);
> + keypad->scan_count << 4);
> if (ret < 0)
> return ret;
>
> @@ -253,17 +266,18 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
> STMPE_KPC_CTRL_LSB_SCAN |
> STMPE_KPC_CTRL_LSB_DEBOUNCE,
> STMPE_KPC_CTRL_LSB_SCAN |
> - (plat->debounce_ms << 1));
> + (keypad->debounce_ms << 1));
> }
>
> -static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
> +static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
> + u32 used_rows, u32 used_cols)
> {
> int row, col;
>
> - for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) {
> - for (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) {
> + for (row = 0; row < used_rows; row++) {
> + for (col = 0; col < used_cols; col++) {
> int code = MATRIX_SCAN_CODE(row, col,
> - STMPE_KEYPAD_ROW_SHIFT);
> + STMPE_KEYPAD_ROW_SHIFT);
> if (keypad->keymap[code] != KEY_RESERVED) {
> keypad->rows |= 1 << row;
> keypad->cols |= 1 << col;
> @@ -272,51 +286,17 @@ static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
> }
> }
>
> -#ifdef CONFIG_OF
> -static const struct stmpe_keypad_platform_data *
> -stmpe_keypad_of_probe(struct device *dev)
> -{
> - struct device_node *np = dev->of_node;
> - struct stmpe_keypad_platform_data *plat;
> -
> - if (!np)
> - return ERR_PTR(-ENODEV);
> -
> - plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
> - if (!plat)
> - return ERR_PTR(-ENOMEM);
> -
> - of_property_read_u32(np, "debounce-interval", &plat->debounce_ms);
> - of_property_read_u32(np, "st,scan-count", &plat->scan_count);
> -
> - plat->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
> -
> - return plat;
> -}
> -#else
> -static inline const struct stmpe_keypad_platform_data *
> -stmpe_keypad_of_probe(struct device *dev)
> -{
> - return ERR_PTR(-EINVAL);
> -}
> -#endif
> -
> static int stmpe_keypad_probe(struct platform_device *pdev)
> {
> struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
> - const struct stmpe_keypad_platform_data *plat;
> + struct device_node *np = pdev->dev.of_node;
> struct stmpe_keypad *keypad;
> struct input_dev *input;
> + u32 rows;
> + u32 cols;
> int error;
> int irq;
>
> - plat = stmpe->pdata->keypad;
> - if (!plat) {
> - plat = stmpe_keypad_of_probe(&pdev->dev);
> - if (IS_ERR(plat))
> - return PTR_ERR(plat);
> - }
> -
> irq = platform_get_irq(pdev, 0);
> if (irq < 0)
> return irq;
> @@ -326,6 +306,13 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
> if (!keypad)
> return -ENOMEM;
>
> + keypad->stmpe = stmpe;
> + keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
> +
> + of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
> + of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
> + keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
> +
> input = devm_input_allocate_device(&pdev->dev);
> if (!input)
> return -ENOMEM;
> @@ -334,23 +321,22 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
> input->id.bustype = BUS_I2C;
> input->dev.parent = &pdev->dev;
>
> - error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
> - STMPE_KEYPAD_MAX_ROWS,
> - STMPE_KEYPAD_MAX_COLS,
> + error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
> + if (error)
> + return error;
> +
> + error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
> keypad->keymap, input);
> if (error)
> return error;
>
> input_set_capability(input, EV_MSC, MSC_SCAN);
> - if (!plat->no_autorepeat)
> + if (!keypad->no_autorepeat)
> __set_bit(EV_REP, input->evbit);
>
> - stmpe_keypad_fill_used_pins(keypad);
> + stmpe_keypad_fill_used_pins(keypad, rows, cols);
>
> - keypad->stmpe = stmpe;
> - keypad->plat = plat;
> keypad->input = input;
> - keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
>
> error = stmpe_keypad_chip_init(keypad);
> if (error < 0)
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index 976e1a390177..dd908fea8c5b 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -116,24 +116,6 @@ extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
> extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
> extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
>
> -struct matrix_keymap_data;
> -
> -/**
> - * struct stmpe_keypad_platform_data - STMPE keypad platform data
> - * @keymap_data: key map table and size
> - * @debounce_ms: debounce interval, in ms. Maximum is
> - * %STMPE_KEYPAD_MAX_DEBOUNCE.
> - * @scan_count: number of key scanning cycles to confirm key data.
> - * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
> - * @no_autorepeat: disable key autorepeat
> - */
> -struct stmpe_keypad_platform_data {
> - const struct matrix_keymap_data *keymap_data;
> - unsigned int debounce_ms;
> - unsigned int scan_count;
> - bool no_autorepeat;
> -};
> -
> #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0)
>
> /**
> @@ -202,7 +184,6 @@ struct stmpe_ts_platform_data {
> * @irq_gpio: gpio number over which irq will be requested (significant only if
> * irq_over_gpio is true)
> * @gpio: GPIO-specific platform data
> - * @keypad: keypad-specific platform data
> * @ts: touchscreen-specific platform data
> */
> struct stmpe_platform_data {
> @@ -215,7 +196,6 @@ struct stmpe_platform_data {
> int autosleep_timeout;
>
> struct stmpe_gpio_platform_data *gpio;
> - struct stmpe_keypad_platform_data *keypad;
> struct stmpe_ts_platform_data *ts;
> };
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-20 09:21    [W:0.053 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site