lkml.org 
[lkml]   [2014]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv8 1/2] pwm: Add Allwinner SoC support
On 20/10/2014 at 16:10:31 +0300, Vladimir Zapolskiy wrote :
> Hi Alexandre,
>
> On 20.10.2014 13:29, Alexandre Belloni wrote:
> > Hi,
> >
> > On 20/10/2014 at 00:22:57 +0300, Vladimir Zapolskiy wrote :
> >>> +struct sun4i_pwm_chip {
> >>> + struct pwm_chip chip;
> >>> + struct clk *clk;
> >>> + void __iomem *base;
> >>> + struct mutex ctrl_lock;
> >>
> >> why do you use mutex? I haven't found any blocking subcalls under
> >> protection, a spinlock seems to fit better here.
> >>
> >
> > A mutex here will do the right thing. The lock is never taken in
> > interrupt context and a mutex is spinning for a few cycles before
> > putting the thread to sleep.
>
> and why do you want to put a thread to sleep in context of the driver?
>

Because the PWM is getting configured from either a kernel thread or a
userspace thread accessing /sys. So you probably want the current thread
to sleep so the other thread accessing the register can finish. Unless
you are on smp and then, the mutex will spin for some time and your
other cpu will be finished by then.


--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2014-10-20 19:21    [W:0.052 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site