lkml.org 
[lkml]   [2014]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/7] pinctrl: abx500: force-convert to generic mux bindings
Date
This converts the ABx500 pin controller and all associated device
trees to use the standard, generic mux bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/ste-href-ab8500.dtsi | 108 +++++++++++++++----------------
arch/arm/boot/dts/ste-href-ab8505.dtsi | 60 ++++++++---------
drivers/pinctrl/nomadik/pinctrl-abx500.c | 16 +++--
3 files changed, 94 insertions(+), 90 deletions(-)

diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 30f8601da323..8be3c471d097 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -47,8 +47,8 @@
gpio2 {
gpio2_default_mode: gpio2_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio2_a_1";
+ function = "gpio";
+ groups = "gpio2_a_1";
};
default_cfg {
ste,pins = "GPIO2_T9";
@@ -60,8 +60,8 @@
gpio4 {
gpio4_default_mode: gpio4_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio4_a_1";
+ function = "gpio";
+ groups = "gpio4_a_1";
};
default_cfg {
ste,pins = "GPIO4_W2";
@@ -73,8 +73,8 @@
gpio10 {
gpio10_default_mode: gpio10_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio10_d_1";
+ function = "gpio";
+ groups = "gpio10_d_1";
};
default_cfg {
ste,pins = "GPIO10_U17";
@@ -86,8 +86,8 @@
gpio11 {
gpio11_default_mode: gpio11_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio11_d_1";
+ function = "gpio";
+ groups = "gpio11_d_1";
};
default_cfg {
ste,pins = "GPIO11_AA18";
@@ -99,8 +99,8 @@
gpio12 {
gpio12_default_mode: gpio12_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio12_d_1";
+ function = "gpio";
+ groups = "gpio12_d_1";
};
default_cfg {
ste,pins = "GPIO12_U16";
@@ -112,8 +112,8 @@
gpio13 {
gpio13_default_mode: gpio13_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio13_d_1";
+ function = "gpio";
+ groups = "gpio13_d_1";
};
default_cfg {
ste,pins = "GPIO13_W17";
@@ -125,8 +125,8 @@
gpio16 {
gpio16_default_mode: gpio16_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio16_a_1";
+ function = "gpio";
+ groups = "gpio16_a_1";
};
default_cfg {
ste,pins = "GPIO16_F15";
@@ -138,8 +138,8 @@
gpio24 {
gpio24_default_mode: gpio24_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio24_a_1";
+ function = "gpio";
+ groups = "gpio24_a_1";
};
default_cfg {
ste,pins = "GPIO24_T14";
@@ -151,8 +151,8 @@
gpio25 {
gpio25_default_mode: gpio25_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio25_a_1";
+ function = "gpio";
+ groups = "gpio25_a_1";
};
default_cfg {
ste,pins = "GPIO25_R16";
@@ -164,8 +164,8 @@
gpio36 {
gpio36_default_mode: gpio36_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio36_a_1";
+ function = "gpio";
+ groups = "gpio36_a_1";
};
default_cfg {
ste,pins = "GPIO36_A17";
@@ -177,8 +177,8 @@
gpio37 {
gpio37_default_mode: gpio37_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio37_a_1";
+ function = "gpio";
+ groups = "gpio37_a_1";
};
default_cfg {
ste,pins = "GPIO37_E15";
@@ -190,8 +190,8 @@
gpio38 {
gpio38_default_mode: gpio38_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio38_a_1";
+ function = "gpio";
+ groups = "gpio38_a_1";
};
default_cfg {
ste,pins = "GPIO38_C17";
@@ -203,8 +203,8 @@
gpio39 {
gpio39_default_mode: gpio39_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio39_a_1";
+ function = "gpio";
+ groups = "gpio39_a_1";
};
default_cfg {
ste,pins = "GPIO39_E16";
@@ -216,8 +216,8 @@
gpio42 {
gpio42_default_mode: gpio42_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio42_a_1";
+ function = "gpio";
+ groups = "gpio42_a_1";
};
default_cfg {
ste,pins = "GPIO42_U2";
@@ -232,8 +232,8 @@
gpio26 {
gpio26_default_mode: gpio26_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio26_d_1";
+ function = "gpio";
+ groups = "gpio26_d_1";
};
default_cfg {
ste,pins = "GPIO26_M16";
@@ -244,8 +244,8 @@
gpio35 {
gpio35_default_mode: gpio35_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio35_d_1";
+ function = "gpio";
+ groups = "gpio35_d_1";
};
default_cfg {
ste,pins = "GPIO35_W15";
@@ -260,8 +260,8 @@
ycbcr {
ycbcr_default_mode: ycbcr_default {
default_mux {
- ste,function = "ycbcr";
- ste,pins = "ycbcr0123_d_1";
+ function = "ycbcr";
+ groups = "ycbcr0123_d_1";
};
default_cfg {
ste,pins = "GPIO6_Y18",
@@ -277,8 +277,8 @@
pwm {
pwm_default_mode: pwm_default {
default_mux {
- ste,function = "pwmout";
- ste,pins = "pwmout1_d_1", "pwmout2_d_1";
+ function = "pwmout";
+ groups = "pwmout1_d_1", "pwmout2_d_1";
};
default_cfg {
ste,pins = "GPIO14_F14",
@@ -292,8 +292,8 @@
adi1 {
adi1_default_mode: adi1_default {
default_mux {
- ste,function = "adi1";
- ste,pins = "adi1_d_1";
+ function = "adi1";
+ groups = "adi1_d_1";
};
default_cfg {
ste,pins = "GPIO17_P5",
@@ -309,8 +309,8 @@
usbuicc {
usbuicc_default_mode: usbuicc_default {
default_mux {
- ste,function = "usbuicc";
- ste,pins = "usbuicc_d_1";
+ function = "usbuicc";
+ groups = "usbuicc_d_1";
};
default_cfg {
ste,pins = "GPIO21_H19",
@@ -325,8 +325,8 @@
dmic {
dmic_default_mode: dmic_default {
default_mux {
- ste,function = "dmic";
- ste,pins = "dmic12_d_1",
+ function = "dmic";
+ groups = "dmic12_d_1",
"dmic34_d_1",
"dmic56_d_1";
};
@@ -345,8 +345,8 @@
extcpena {
extcpena_default_mode: extcpena_default {
default_mux {
- ste,function = "extcpena";
- ste,pins = "extcpena_d_1";
+ function = "extcpena";
+ groups = "extcpena_d_1";
};
default_cfg {
ste,pins = "GPIO34_R17";
@@ -359,8 +359,8 @@
modsclsda {
modsclsda_default_mode: modsclsda_default {
default_mux {
- ste,function = "modsclsda";
- ste,pins = "modsclsda_d_1";
+ function = "modsclsda";
+ groups = "modsclsda_d_1";
};
default_cfg {
ste,pins = "GPIO40_T19",
@@ -376,8 +376,8 @@
sysclkreq2 {
sysclkreq2_default_mode: sysclkreq2_default {
default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq2_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq2_d_1";
};
default_cfg {
ste,pins = "GPIO1_T10";
@@ -387,8 +387,8 @@
};
sysclkreq2_sleep_mode: sysclkreq2_sleep {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio1_a_1";
+ function = "gpio";
+ groups = "gpio1_a_1";
};
default_cfg {
ste,pins = "GPIO1_T10";
@@ -400,8 +400,8 @@
sysclkreq4 {
sysclkreq4_default_mode: sysclkreq4_default {
default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq4_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq4_d_1";
};
default_cfg {
ste,pins = "GPIO3_U9";
@@ -411,8 +411,8 @@
};
sysclkreq4_sleep_mode: sysclkreq4_sleep {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio3_a_1";
+ function = "gpio";
+ groups = "gpio3_a_1";
};
default_cfg {
ste,pins = "GPIO3_U9";
diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi
index 6006d62086a2..112053c7aa51 100644
--- a/arch/arm/boot/dts/ste-href-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8505.dtsi
@@ -35,8 +35,8 @@
gpio2 {
gpio2_default_mode: gpio2_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio2_a_1";
+ function = "gpio";
+ groups = "gpio2_a_1";
};
default_cfg {
ste,pins = "GPIO2_R5";
@@ -48,8 +48,8 @@
gpio10 {
gpio10_default_mode: gpio10_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio10_d_1";
+ function = "gpio";
+ groups = "gpio10_d_1";
};
default_cfg {
ste,pins = "GPIO10_B16";
@@ -61,8 +61,8 @@
gpio11 {
gpio11_default_mode: gpio11_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio11_d_1";
+ function = "gpio";
+ groups = "gpio11_d_1";
};
default_cfg {
ste,pins = "GPIO11_B17";
@@ -74,8 +74,8 @@
gpio13 {
gpio13_default_mode: gpio13_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio13_d_1";
+ function = "gpio";
+ groups = "gpio13_d_1";
};
default_cfg {
ste,pins = "GPIO13_D17";
@@ -87,8 +87,8 @@
gpio34 {
gpio34_default_mode: gpio34_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio34_a_1";
+ function = "gpio";
+ groups = "gpio34_a_1";
};
default_cfg {
ste,pins = "GPIO34_H14";
@@ -100,8 +100,8 @@
gpio50 {
gpio50_default_mode: gpio50_default {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio50_d_1";
+ function = "gpio";
+ groups = "gpio50_d_1";
};
default_cfg {
ste,pins = "GPIO50_L4";
@@ -114,8 +114,8 @@
pwm {
pwm_default_mode: pwm_default {
default_mux {
- ste,function = "pwmout";
- ste,pins = "pwmout1_d_1";
+ function = "pwmout";
+ groups = "pwmout1_d_1";
};
default_cfg {
ste,pins = "GPIO14_C16";
@@ -128,8 +128,8 @@
adi2 {
adi2_default_mode: adi2_default {
default_mux {
- ste,function = "adi2";
- ste,pins = "adi2_d_1";
+ function = "adi2";
+ groups = "adi2_d_1";
};
default_cfg {
ste,pins = "GPIO17_P2",
@@ -145,8 +145,8 @@
modsclsda {
modsclsda_default_mode: modsclsda_default {
default_mux {
- ste,function = "modsclsda";
- ste,pins = "modsclsda_d_1";
+ function = "modsclsda";
+ groups = "modsclsda_d_1";
};
default_cfg {
ste,pins = "GPIO40_J15",
@@ -159,8 +159,8 @@
resethw {
resethw_default_mode: resethw_default {
default_mux {
- ste,function = "resethw";
- ste,pins = "resethw_d_1";
+ function = "resethw";
+ groups = "resethw_d_1";
};
default_cfg {
ste,pins = "GPIO52_D16";
@@ -172,8 +172,8 @@
service {
service_default_mode: service_default {
default_mux {
- ste,function = "service";
- ste,pins = "service_d_1";
+ function = "service";
+ groups = "service_d_1";
};
default_cfg {
ste,pins = "GPIO53_D15";
@@ -188,8 +188,8 @@
sysclkreq2 {
sysclkreq2_default_mode: sysclkreq2_default {
default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq2_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq2_d_1";
};
default_cfg {
ste,pins = "GPIO1_N4";
@@ -199,8 +199,8 @@
};
sysclkreq2_sleep_mode: sysclkreq2_sleep {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio1_a_1";
+ function = "gpio";
+ groups = "gpio1_a_1";
};
default_cfg {
ste,pins = "GPIO1_N4";
@@ -212,8 +212,8 @@
sysclkreq4 {
sysclkreq4_default_mode: sysclkreq4_default {
default_mux {
- ste,function = "sysclkreq";
- ste,pins = "sysclkreq4_d_1";
+ function = "sysclkreq";
+ groups = "sysclkreq4_d_1";
};
default_cfg {
ste,pins = "GPIO3_P5";
@@ -223,8 +223,8 @@
};
sysclkreq4_sleep_mode: sysclkreq4_sleep {
default_mux {
- ste,function = "gpio";
- ste,pins = "gpio3_a_1";
+ function = "gpio";
+ groups = "gpio3_a_1";
};
default_cfg {
ste,pins = "GPIO3_P5";
diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c
index af0d417fe3fb..debeffcc2134 100644
--- a/drivers/pinctrl/nomadik/pinctrl-abx500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c
@@ -894,12 +894,13 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
unsigned int nconfigs = 0;
bool has_config = 0;
struct property *prop;
- const char *group, *gpio_name;
struct device_node *np_config;

- ret = of_property_read_string(np, "ste,function", &function);
+ ret = of_property_read_string(np, "function", &function);
if (ret >= 0) {
- ret = of_property_count_strings(np, "ste,pins");
+ const char *group;
+
+ ret = of_property_count_strings(np, "groups");
if (ret < 0)
goto exit;

@@ -908,7 +909,7 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
if (ret < 0)
goto exit;

- of_property_for_each_string(np, "ste,pins", prop, group) {
+ of_property_for_each_string(np, "groups", prop, group) {
ret = abx500_dt_add_map_mux(map, reserved_maps,
num_maps, group, function);
if (ret < 0)
@@ -928,6 +929,9 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
has_config |= nconfigs;
}
if (has_config) {
+ const char *gpio_name;
+ const char *pin;
+
ret = of_property_count_strings(np, "ste,pins");
if (ret < 0)
goto exit;
@@ -938,8 +942,8 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
if (ret < 0)
goto exit;

- of_property_for_each_string(np, "ste,pins", prop, group) {
- gpio_name = abx500_find_pin_name(pctldev, group);
+ of_property_for_each_string(np, "ste,pins", prop, pin) {
+ gpio_name = abx500_find_pin_name(pctldev, pin);

ret = abx500_dt_add_map_configs(map, reserved_maps,
num_maps, gpio_name, configs, 1);
--
1.9.3


\
 
 \ /
  Last update: 2014-10-02 11:21    [W:0.278 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site