lkml.org 
[lkml]   [2014]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] socfpga: support suspend to ram
On Wed, 1 Oct 2014, atull@opensource.altera.com wrote:

> From: Alan Tull <atull@opensource.altera.com>
>
> Add code that requests that the sdr controller go into
> self-refresh mode. This code is run from ocram.
>
> This patch assumes that u-boot has already configured sdr:
> sdr.ctrlcfg.lowpwreq.selfrfshmask = 3
> sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8
> sdr.ctrlcfg.dramtiming4.selfrfshexit = 512
>
> How to suspend to ram:
> $ echo enabled > \
> /sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup
>
> $ echo -n mem > /sys/power/state
>
> Signed-off-by: Alan Tull <atull@opensource.altera.com>
>
> v2: use Generic on-chip SRAM driver to allocate ocram
> rm fncpy_align since generic allocator handles alignment
> check __arm_ioremap_exec return code
> check for NULL pointers
> add a comment regarding sdram controller configuration
> ---
> arch/arm/mach-socfpga/Kconfig | 1 +
> arch/arm/mach-socfpga/Makefile | 1 +
> arch/arm/mach-socfpga/core.h | 6 +-
> arch/arm/mach-socfpga/platsmp.c | 4 +-
> arch/arm/mach-socfpga/pm.c | 147 +++++++++++++++++++++++++++++++
> arch/arm/mach-socfpga/self-refresh.S | 157 ++++++++++++++++++++++++++++++++++
> arch/arm/mach-socfpga/socfpga.c | 10 +++
> 7 files changed, 323 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/mach-socfpga/pm.c
> create mode 100644 arch/arm/mach-socfpga/self-refresh.S
>
> diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
> index b5f8d75..81449da 100644
> --- a/arch/arm/mach-socfpga/Kconfig
> +++ b/arch/arm/mach-socfpga/Kconfig
> @@ -4,6 +4,7 @@ config ARCH_SOCFPGA
> select ARM_GIC
> select CACHE_L2X0
> select DW_APB_TIMER_OF
> + select GENERIC_ALLOCATOR
> select GPIO_PL061 if GPIOLIB
> select HAVE_ARM_SCU
> select HAVE_ARM_TWD if SMP
> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
> index 6dd7a93..0591927 100644
> --- a/arch/arm/mach-socfpga/Makefile
> +++ b/arch/arm/mach-socfpga/Makefile
> @@ -4,3 +4,4 @@
>
> obj-y := socfpga.o
> obj-$(CONFIG_SMP) += headsmp.o platsmp.o
> +obj-$(CONFIG_SUSPEND) += pm.o self-refresh.o
> diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
> index 953a9c0..211adfd 100644
> --- a/arch/arm/mach-socfpga/core.h
> +++ b/arch/arm/mach-socfpga/core.h
> @@ -21,7 +21,7 @@
> #define __MACH_CORE_H
>
> #define SOCFPGA_RSTMGR_CTRL 0x04
> -#define SOCFPGA_RSTMGR_MODMPURST 0x10
> +#define SOCFPGA_RSTMGR_MPUMODRST 0x10

Obvious error here - I ment to change the name of the #define where I
added it in patch 1, not add it in patch 1 and change it in patch 2.

Alan

> #define SOCFPGA_RSTMGR_MODPERRST 0x14
> #define SOCFPGA_RSTMGR_BRGMODRST 0x1c
>
> @@ -39,6 +39,7 @@ extern void socfpga_sysmgr_init(void);
>
> extern void __iomem *sys_manager_base_addr;
> extern void __iomem *rst_manager_base_addr;
> +extern void __iomem *sdr_ctl_base_addr;
>
> extern struct smp_operations socfpga_smp_ops;
> extern char secondary_trampoline, secondary_trampoline_end;
> @@ -47,4 +48,7 @@ extern unsigned long cpu1start_addr;
>
> #define SOCFPGA_SCU_VIRT_BASE 0xfffec000
>
> +u32 socfpga_sdram_self_refresh(u32 sdr_base, u32 scu_base);
> +extern unsigned int socfpga_sdram_self_refresh_sz;
> +
> #endif
> diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
> index 97907dd..4093852 100644
> --- a/arch/arm/mach-socfpga/platsmp.c
> +++ b/arch/arm/mach-socfpga/platsmp.c
> @@ -36,7 +36,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
> if (cpu1start_addr) {
> /* This will put CPU #1 into reset. */
> __raw_writel(RSTMGR_MPUMODRST_CPU1,
> - rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
> + rst_manager_base_addr + SOCFPGA_RSTMGR_MPUMODRST);
>
> memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
>
> @@ -49,7 +49,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
>
> /* This will release CPU #1 out of reset. */
> __raw_writel(0,
> - rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
> + rst_manager_base_addr + SOCFPGA_RSTMGR_MPUMODRST);
> }
>
> return 0;
> diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
> new file mode 100644
> index 0000000..912aab8
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/pm.c
> @@ -0,0 +1,147 @@
> +/*
> + * arch/arm/mach-socfpga/pm.c
> + *
> + * Copyright (C) 2014 Altera Corporation. All rights reserved.
> + *
> + * with code from pm-imx6.c
> + * Copyright 2011-2014 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/genalloc.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/of_platform.h>
> +#include <linux/suspend.h>
> +#include <asm/suspend.h>
> +#include <asm/fncpy.h>
> +#include "core.h"
> +
> +/* Pointer to function copied to ocram */
> +static u32 (*socfpga_sdram_self_refresh_in_ocram)(u32 sdr_base, u32 scu_base);
> +
> +static int socfpga_setup_ocram_self_refresh(void)
> +{
> + struct platform_device *pdev;
> + phys_addr_t ocram_pbase;
> + struct device_node *np;
> + struct gen_pool *ocram_pool;
> + unsigned long ocram_base;
> + void __iomem *suspend_ocram_base;
> + int ret = 0;
> +
> + np = of_find_compatible_node(NULL, NULL, "mmio-sram");
> + if (!np) {
> + pr_err("%s: Unable to find mmio-sram in dtb\n", __func__);
> + return 0;
> + }
> +
> + pdev = of_find_device_by_node(np);
> + if (!pdev) {
> + pr_warn("%s: failed to find ocram device!\n", __func__);
> + ret = -ENODEV;
> + goto put_node;
> + }
> +
> + ocram_pool = dev_get_gen_pool(&pdev->dev);
> + if (!ocram_pool) {
> + pr_warn("%s: ocram pool unavailable!\n", __func__);
> + ret = -ENODEV;
> + goto put_node;
> + }
> +
> + ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
> + if (!ocram_base) {
> + pr_warn("%s: unable to alloc ocram!\n", __func__);
> + ret = -ENOMEM;
> + goto put_node;
> + }
> +
> + ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
> +
> + suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
> + socfpga_sdram_self_refresh_sz,
> + false);
> + if (!suspend_ocram_base) {
> + pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
> + ret = -ENOMEM;
> + goto put_node;
> + }
> +
> + /* Copy the code that puts DDR in self refresh to ocram */
> + socfpga_sdram_self_refresh_in_ocram =
> + (void *)fncpy(suspend_ocram_base,
> + &socfpga_sdram_self_refresh,
> + socfpga_sdram_self_refresh_sz);
> +
> + WARN(!socfpga_sdram_self_refresh_in_ocram,
> + "could not copy function to ocram");
> + if (!socfpga_sdram_self_refresh_in_ocram)
> + ret = -EFAULT;
> +
> +put_node:
> + of_node_put(np);
> +
> + return ret;
> +}
> +
> +static int socfpga_pm_suspend(unsigned long arg)
> +{
> + u32 ret;
> +
> + if (!sdr_ctl_base_addr || !socfpga_scu_base_addr)
> + return -EFAULT;
> +
> + ret = socfpga_sdram_self_refresh_in_ocram(
> + (u32)sdr_ctl_base_addr, (u32)socfpga_scu_base_addr);
> +
> + pr_debug("%s self-refresh loops request=%d exit=%d\n", __func__,
> + ret & 0xffff, (ret >> 16) & 0xffff);
> +
> + return 0;
> +}
> +
> +static int socfpga_pm_enter(suspend_state_t state)
> +{
> + switch (state) {
> + case PM_SUSPEND_STANDBY:
> + case PM_SUSPEND_MEM:
> + outer_disable();
> + cpu_suspend(0, socfpga_pm_suspend);
> + outer_resume();
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static const struct platform_suspend_ops socfpga_pm_ops = {
> + .valid = suspend_valid_only_mem,
> + .enter = socfpga_pm_enter,
> +};
> +
> +static int __init socfpga_pm_init(void)
> +{
> + if (socfpga_setup_ocram_self_refresh())
> + return -EFAULT;
> +
> + suspend_set_ops(&socfpga_pm_ops);
> + pr_info("SoCFPGA initialized for DDR self-refresh during suspend.\n");
> +
> + return 0;
> +}
> +arch_initcall(socfpga_pm_init);
> diff --git a/arch/arm/mach-socfpga/self-refresh.S b/arch/arm/mach-socfpga/self-refresh.S
> new file mode 100644
> index 0000000..93962d4
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/self-refresh.S
> @@ -0,0 +1,157 @@
> +/*
> + * Copyright (C) 2014 Altera Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/linkage.h>
> +#include <asm/assembler.h>
> +
> +#define SOCFPGA_SCU_CTRL_OFFS 0
> +#define SCU_STANDBY_ENA 0x20
> +#define MAX_LOOP_COUNT 1000
> +
> +/* Register offset */
> +#define SDR_CTRLGRP_LOWPWREQ_ADDR 0x54
> +#define SDR_CTRLGRP_LOWPWRACK_ADDR 0x58
> +
> +/* Bitfield positions */
> +#define SELFRSHREQ_POS 3
> +#define SELFRSHREQ_MASK 0x8
> +
> +#define SELFRFSHACK_POS 1
> +#define SELFRFSHACK_MASK 0x2
> +
> + /*
> + * This code assumes that the bootloader has already
> + * properly configured the sdram controller:
> + *
> + * sdr.ctrlcfg.lowpwreq.selfrfshmask = 3
> + * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8
> + * sdr.ctrlcfg.dramtiming4.selfrfshexit = 512
> + */
> +
> + .arch armv7-a
> + .text
> + .align 3
> +
> + /*
> + * socfpga_sdram_self_refresh
> + *
> + * r0 : sdr_ctl_base_addr
> + * r1 : socfpga_scu_base_addr
> + * r2 : temp storage of register values
> + * r3 : loop counter
> + * r4 : temp storage of return value
> + *
> + * return value: lower 16 bits: loop count going into self refresh
> + * upper 16 bits: loop count exiting self refresh
> + */
> +ENTRY(socfpga_sdram_self_refresh)
> + stmfd sp!, {r4}
> +
> + /*
> + * Enable SCU (snoop) standby mode.
> + *
> + * From the ARM Cortex-A9 MPCore Technical Reference Manual:
> + * "When set, SCU CLK is turned off when all processors are in WFI
> + * mode, there is no pending request on the ACP (if implemented), and
> + * there is no remaining activity in the SCU."
> + */
> + ldr r2, [r1, #SOCFPGA_SCU_CTRL_OFFS]
> + orr r2, r2, #SCU_STANDBY_ENA
> + str r2, [r1, #SOCFPGA_SCU_CTRL_OFFS]
> +
> + /* Enable dynamic clock gating in the Power Control Register. */
> + mrc p15, 0, r2, c15, c0, 0
> + orr r2, r2, #1
> + mcr p15, 0, r2, c15, c0, 0
> +
> + /* Enable self refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 1 */
> + ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
> + orr r2, r2, #SELFRSHREQ_MASK
> + str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
> +
> + /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 1 or hit max loops */
> + mov r3, #0
> +while_ack_0:
> + ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR]
> + and r2, r2, #SELFRFSHACK_MASK
> + cmp r2, #SELFRFSHACK_MASK
> + beq ack_1
> +
> + add r3, #1
> + cmp r3, #MAX_LOOP_COUNT
> + bne while_ack_0
> +
> +ack_1:
> + mov r4, r3
> +
> + /*
> + * Execute an ISB instruction to ensure that all of the
> + * CP15 register changes have been committed.
> + */
> + isb
> +
> + /*
> + * Execute a barrier instruction to ensure that all cache,
> + * TLB and branch predictor maintenance operations issued
> + * by any CPU in the cluster have completed.
> + */
> + dsb
> + dmb
> +
> + wfi
> +
> + /* Disable self-refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 0 */
> + ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
> + bic r2, r2, #SELFRSHREQ_MASK
> + str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
> +
> + /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 0 or hit max loops */
> + mov r3, #0
> +while_ack_1:
> + ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR]
> + and r2, r2, #SELFRFSHACK_MASK
> + cmp r2, #SELFRFSHACK_MASK
> + bne ack_0
> +
> + add r3, #1
> + cmp r3, #MAX_LOOP_COUNT
> + bne while_ack_1
> +
> +ack_0:
> + /*
> + * Prepare return value:
> + * Shift loop count for exiting self refresh into upper 16 bits.
> + * Leave loop count for requesting self refresh in lower 16 bits.
> + */
> + mov r3, r3, lsl #16
> + add r4, r4, r3
> +
> + /* Disable dynamic clock gating in the Power Control Register. */
> + mrc p15, 0, r2, c15, c0, 0
> + bic r2, r2, #1
> + mcr p15, 0, r2, c15, c0, 0
> +
> + /* Disable SCU standby mode */
> + ldr r2, [r1, #SOCFPGA_SCU_CTRL_OFFS]
> + bic r2, r2, #SCU_STANDBY_ENA
> + str r2, [r1, #SOCFPGA_SCU_CTRL_OFFS]
> +
> + mov r0, r4 @ return value
> + ldmfd sp!, {r4}
> + bx lr @ return
> +
> +ENDPROC(socfpga_sdram_self_refresh)
> +ENTRY(socfpga_sdram_self_refresh_sz)
> + .word . - socfpga_sdram_self_refresh
> diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
> index adbf383..34b4cc5 100644
> --- a/arch/arm/mach-socfpga/socfpga.c
> +++ b/arch/arm/mach-socfpga/socfpga.c
> @@ -30,6 +30,7 @@ void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
> void __iomem *sys_manager_base_addr;
> void __iomem *rst_manager_base_addr;
> unsigned long cpu1start_addr;
> +void __iomem *sdr_ctl_base_addr;
>
> static struct map_desc scu_io_desc __initdata = {
> .virtual = SOCFPGA_SCU_VIRT_BASE,
> @@ -77,6 +78,15 @@ void __init socfpga_sysmgr_init(void)
>
> np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");
> rst_manager_base_addr = of_iomap(np, 0);
> +
> + np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl");
> + if (!np) {
> + pr_err("SOCFPGA: Unable to find sdr-ctl\n");
> + return;
> + }
> +
> + sdr_ctl_base_addr = of_iomap(np, 0);
> + WARN_ON(!sdr_ctl_base_addr);
> }
>
> static void __init socfpga_init_irq(void)
> --
> 1.7.9.5
>
>


\
 
 \ /
  Last update: 2014-10-03 00:01    [W:0.223 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site