lkml.org 
[lkml]   [2014]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: RFC: get_user_pages_locked|unlocked to leverage VM_FAULT_RETRY
On Thu, Oct 02, 2014 at 02:56:38PM +0200, Peter Zijlstra wrote:
> On Thu, Oct 02, 2014 at 02:50:52PM +0200, Peter Zijlstra wrote:
> > On Thu, Oct 02, 2014 at 02:31:17PM +0200, Andrea Arcangeli wrote:
> > > On Wed, Oct 01, 2014 at 05:36:11PM +0200, Peter Zijlstra wrote:
> > > > For all these and the other _fast() users, is there an actual limit to
> > > > the nr_pages passed in? Because we used to have the 64 pages limit from
> > > > DIO, but without that we get rather long IRQ-off latencies.
> > >
> > > Ok, I would tend to think this is an issue to solve in gup_fast
> > > implementation, I wouldn't blame or modify the callers for it.
> > >
> > > I don't think there's anything that prevents gup_fast to enable irqs
> > > after certain number of pages have been taken, nop; and disable the
> > > irqs again.
> > >
> >
> > Agreed, I once upon a time had a patch set converting the 2 (x86 and
> > powerpc) gup_fast implementations at the time, but somehow that never
> > got anywhere.
> >
> > Just saying we should probably do that before we add callers with
> > unlimited nr_pages.
>
> https://lkml.org/lkml/2009/6/24/457
>
> Clearly there's more work these days. Many more archs grew a gup.c

What about this? The alternative is that I do s/gup_fast/gup_unlocked/
to still retain the mmap_sem scalability benefit. It'd be still better
than the current plain gup() (and it would be equivalent for
userfaultfd point of view).

Or if the below is ok, should I modify all other archs too or are the
respective maintainers going to fix it themself? For example the arm*
gup_fast is a moving target in development on linux-mm right now and I
should only patch the gup_rcu version that didn't hit upstream yet. In
fact after that gup_rcu merge, supposedly the powerpc and sparc
gup_fast can be dropped from arch/* entirely and they can use the
generic version (otherwise having the arm gup_fast in mm/ instead of
arch/ would be a mistake). Right now, I wouldn't touch at least
arm/sparc/powerpc until the gup_rcu hit upstream as those are all
about to disappear.

Thanks,
Andrea

From 2f6079396a59e64a380ff06e6107276dfa67b3ba Mon Sep 17 00:00:00 2001
From: Andrea Arcangeli <aarcange@redhat.com>
Date: Thu, 2 Oct 2014 16:58:00 +0200
Subject: [PATCH] mm: gup: make get_user_pages_fast and __get_user_pages_fast
latency conscious

This teaches gup_fast and __gup_fast to re-enable irqs and
cond_resched() if possible every BATCH_PAGES.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
---
arch/x86/mm/gup.c | 239 +++++++++++++++++++++++++++++++++++-------------------
1 file changed, 154 insertions(+), 85 deletions(-)

diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 2ab183b..e05d7b0 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -12,6 +12,12 @@

#include <asm/pgtable.h>

+/*
+ * Keep irq disabled for no more than BATCH_PAGES pages.
+ * Matches PTRS_PER_PTE (or half in non-PAE kernels).
+ */
+#define BATCH_PAGES 512
+
static inline pte_t gup_get_pte(pte_t *ptep)
{
#ifndef CONFIG_X86_PAE
@@ -250,6 +256,40 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
return 1;
}

+static inline int __get_user_pages_fast_batch(unsigned long start,
+ unsigned long end,
+ int write, struct page **pages)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long next;
+ unsigned long flags;
+ pgd_t *pgdp;
+ int nr = 0;
+
+ /*
+ * This doesn't prevent pagetable teardown, but does prevent
+ * the pagetables and pages from being freed on x86.
+ *
+ * So long as we atomically load page table pointers versus teardown
+ * (which we do on x86, with the above PAE exception), we can follow the
+ * address down to the the page and take a ref on it.
+ */
+ local_irq_save(flags);
+ pgdp = pgd_offset(mm, start);
+ do {
+ pgd_t pgd = *pgdp;
+
+ next = pgd_addr_end(start, end);
+ if (pgd_none(pgd))
+ break;
+ if (!gup_pud_range(pgd, start, next, write, pages, &nr))
+ break;
+ } while (pgdp++, start = next, start != end);
+ local_irq_restore(flags);
+
+ return nr;
+}
+
/*
* Like get_user_pages_fast() except its IRQ-safe in that it won't fall
* back to the regular GUP.
@@ -257,31 +297,57 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
struct page **pages)
{
- struct mm_struct *mm = current->mm;
- unsigned long addr, len, end;
- unsigned long next;
- unsigned long flags;
- pgd_t *pgdp;
- int nr = 0;
+ unsigned long len, end, batch_pages;
+ int nr, ret;

start &= PAGE_MASK;
- addr = start;
len = (unsigned long) nr_pages << PAGE_SHIFT;
end = start + len;
+ /*
+ * get_user_pages() handles nr_pages == 0 gracefully, but
+ * gup_fast starts walking the first pagetable in a do {}
+ * while() fashion so it's not robust to handle nr_pages ==
+ * 0. There's no point in being permissive about end < start
+ * either. So this check verifies both nr_pages being non
+ * zero, and that "end" didn't overflow.
+ */
+ VM_BUG_ON(end <= start);
if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
(void __user *)start, len)))
return 0;

- /*
- * XXX: batch / limit 'nr', to avoid large irq off latency
- * needs some instrumenting to determine the common sizes used by
- * important workloads (eg. DB2), and whether limiting the batch size
- * will decrease performance.
- *
- * It seems like we're in the clear for the moment. Direct-IO is
- * the main guy that batches up lots of get_user_pages, and even
- * they are limited to 64-at-a-time which is not so many.
- */
+ ret = 0;
+ for (;;) {
+ batch_pages = nr_pages;
+ if (batch_pages > BATCH_PAGES && !irqs_disabled())
+ batch_pages = BATCH_PAGES;
+ len = (unsigned long) batch_pages << PAGE_SHIFT;
+ end = start + len;
+ nr = __get_user_pages_fast_batch(start, end, write, pages);
+ VM_BUG_ON(nr > batch_pages);
+ nr_pages -= nr;
+ ret += nr;
+ if (!nr_pages || nr != batch_pages)
+ break;
+ start += len;
+ pages += batch_pages;
+ }
+
+ return ret;
+}
+
+static inline int get_user_pages_fast_batch(unsigned long start,
+ unsigned long end,
+ int write, struct page **pages)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long next;
+ pgd_t *pgdp;
+ int nr = 0;
+#ifdef CONFIG_DEBUG_VM
+ unsigned long orig_start = start;
+#endif
+
/*
* This doesn't prevent pagetable teardown, but does prevent
* the pagetables and pages from being freed on x86.
@@ -290,18 +356,22 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* (which we do on x86, with the above PAE exception), we can follow the
* address down to the the page and take a ref on it.
*/
- local_irq_save(flags);
- pgdp = pgd_offset(mm, addr);
+ local_irq_disable();
+ pgdp = pgd_offset(mm, start);
do {
pgd_t pgd = *pgdp;

- next = pgd_addr_end(addr, end);
- if (pgd_none(pgd))
+ next = pgd_addr_end(start, end);
+ if (pgd_none(pgd)) {
+ VM_BUG_ON(nr >= (end-orig_start) >> PAGE_SHIFT);
break;
- if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+ }
+ if (!gup_pud_range(pgd, start, next, write, pages, &nr)) {
+ VM_BUG_ON(nr >= (end-orig_start) >> PAGE_SHIFT);
break;
- } while (pgdp++, addr = next, addr != end);
- local_irq_restore(flags);
+ }
+ } while (pgdp++, start = next, start != end);
+ local_irq_enable();

return nr;
}
@@ -326,80 +396,79 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
struct page **pages)
{
struct mm_struct *mm = current->mm;
- unsigned long addr, len, end;
- unsigned long next;
- pgd_t *pgdp;
- int nr = 0;
+ unsigned long len, end, batch_pages;
+ int nr, ret;
+#ifdef CONFIG_DEBUG_VM
+ unsigned long orig_start = start;
+#endif

start &= PAGE_MASK;
- addr = start;
+#ifdef CONFIG_DEBUG_VM
+ orig_start = start;
+#endif
len = (unsigned long) nr_pages << PAGE_SHIFT;

end = start + len;
- if (end < start)
- goto slow_irqon;
+ /*
+ * get_user_pages() handles nr_pages == 0 gracefully, but
+ * gup_fast starts walking the first pagetable in a do {}
+ * while() fashion so it's not robust to handle nr_pages ==
+ * 0. There's no point in being permissive about end < start
+ * either. So this check verifies both nr_pages being non
+ * zero, and that "end" didn't overflow.
+ */
+ VM_BUG_ON(end <= start);

+ nr = ret = 0;
#ifdef CONFIG_X86_64
if (end >> __VIRTUAL_MASK_SHIFT)
goto slow_irqon;
#endif
+ for (;;) {
+ cond_resched();
+ batch_pages = min(nr_pages, BATCH_PAGES);
+ len = (unsigned long) batch_pages << PAGE_SHIFT;
+ end = start + len;
+ nr = get_user_pages_fast_batch(start, end, write, pages);
+ VM_BUG_ON(nr > batch_pages);
+ nr_pages -= nr;
+ ret += nr;
+ if (!nr_pages)
+ break;
+ if (nr < batch_pages)
+ goto slow_irqon;
+ start += len;
+ pages += batch_pages;
+ }

- /*
- * XXX: batch / limit 'nr', to avoid large irq off latency
- * needs some instrumenting to determine the common sizes used by
- * important workloads (eg. DB2), and whether limiting the batch size
- * will decrease performance.
- *
- * It seems like we're in the clear for the moment. Direct-IO is
- * the main guy that batches up lots of get_user_pages, and even
- * they are limited to 64-at-a-time which is not so many.
- */
- /*
- * This doesn't prevent pagetable teardown, but does prevent
- * the pagetables and pages from being freed on x86.
- *
- * So long as we atomically load page table pointers versus teardown
- * (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
- */
- local_irq_disable();
- pgdp = pgd_offset(mm, addr);
- do {
- pgd_t pgd = *pgdp;
-
- next = pgd_addr_end(addr, end);
- if (pgd_none(pgd))
- goto slow;
- if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
- goto slow;
- } while (pgdp++, addr = next, addr != end);
- local_irq_enable();
-
- VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
- return nr;
-
- {
- int ret;
+ VM_BUG_ON(ret != (end - orig_start) >> PAGE_SHIFT);
+ return ret;

-slow:
- local_irq_enable();
slow_irqon:
- /* Try to get the remaining pages with get_user_pages */
- start += nr << PAGE_SHIFT;
- pages += nr;
-
- ret = get_user_pages_unlocked(current, mm, start,
- (end - start) >> PAGE_SHIFT,
- write, 0, pages);
-
- /* Have to be a bit careful with return values */
- if (nr > 0) {
- if (ret < 0)
- ret = nr;
- else
- ret += nr;
- }
+ /* Try to get the remaining pages with get_user_pages */
+ start += nr << PAGE_SHIFT;
+ pages += nr;

- return ret;
+ /*
+ * "nr" was the get_user_pages_fast_batch last retval, "ret"
+ * was the sum of all get_user_pages_fast_batch retvals, now
+ * "nr" becomes the sum of all get_user_pages_fast_batch
+ * retvals and "ret" will become the get_user_pages_unlocked
+ * retval.
+ */
+ nr = ret;
+
+ ret = get_user_pages_unlocked(current, mm, start,
+ (end - start) >> PAGE_SHIFT,
+ write, 0, pages);
+
+ /* Have to be a bit careful with return values */
+ if (nr > 0) {
+ if (ret < 0)
+ ret = nr;
+ else
+ ret += nr;
}
+
+ return ret;
}

\
 
 \ /
  Last update: 2014-10-02 18:21    [W:0.042 / U:1.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site