lkml.org 
[lkml]   [2014]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] staging: rts5208: Clean up coding style in rtsx_chip.c to get rid of checkpatch.pl warnings and combine two ifs into one
On 2014.10.02 14:45, Joe Perches wrote:
> On Thu, 2014-10-02 at 14:13 +0300, Giedrius Statkevicius wrote:
>> Fix 10 occurences of coding style errors where the line exceeds 80 characters by breaking them into more lines.
>> Checkpatch.pl reports these errors as: 'WARNING: line over 80 characters'
>> Also, removes unnecessary returns in two void functions by removing the return statements.
>> Checkpatch.pl reports these errors as: 'WARNING: void function return statements are not generally useful'
>> Lastly it combines two if statements into one in rtsx_reset_chip()
>
> Another way to reduce indentation is to write another
> utility function like the suggested patch at the end
> of this email.
>
> Also, changing:
>
> if (foo) {
> [short code block...]
> } else
> [long code block...]
> }
>
> return bar;
> to:
> if (foo) {
> [short code block...]
> return bar;
> }
>
> [long code block...]
> return bar;
>
> reduces indentation.
>
> Al Viro once gave good advice about indentation here:
> https://lkml.org/lkml/2013/3/20/345
>
> Using ternaries can also reduce line count and
> indentation:
> if (something)
> foo(bar, 1, ...);
> else
> foo(bar, 2, ...);
> can be written
> foo(bar, something ? 1 : 2, ...)
First of all, the purpose of this trivial patch is to clean the simple, obvious coding style mistakes reported by checkpatch.pl to get my feet wet as I am a kernel newbie.
Obviously, if we take a look at the code more closely there are many problems including the ones you've mentioned.
For example, in rts5208_init() in atleast in 6 places we can use ternaries. This is one of them:

if (val & 0x01)
chip->hw_bypass_sd = 1;
else
chip->hw_bypass_sd = 0;

A lot of places where we can combine if's. In rtsx_disable_aspm():

if (chip->aspm_l0s_l1_en && chip->dynamic_aspm) {
if (chip->aspm_enabled) {

So I guess I should make a way bigger patch that cleans more of the coding style mistakes if no one wants to take this patch?
To be honest, I would like these to be two seperate patches as they do different things and not just a big one that does both things as I may not be able to do that sucessfully.

thanks,
Giedrius
>
> Here's a suggestion:
> ---
> drivers/staging/rts5208/rtsx_chip.c | 71 ++++++++++++++++++++-----------------
> 1 file changed, 38 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/staging/rts5208/rtsx_chip.c b/drivers/staging/rts5208/rtsx_chip.c
> index 1411471..85d670d 100644
> --- a/drivers/staging/rts5208/rtsx_chip.c
> +++ b/drivers/staging/rts5208/rtsx_chip.c
> @@ -226,6 +226,43 @@ static int rtsx_pre_handle_sdio_new(struct rtsx_chip *chip)
> }
> #endif
>
> +static int rtsx_reset_aspm(struct rtsx_chip *chip)
> +{
> + int rtn = STATUS_SUCCESS;
> +
> + if (chip->dynamic_aspm) {
> + if (CHK_SDIO_EXIST(chip) && CHECK_PID(chip, 0x5288)) {
> + rtn = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF,
> + chip->aspm_l0s_l1_en);
> + if (rtn != STATUS_SUCCESS)
> + TRACE_RET(chip, STATUS_FAIL);
> + }
> + return rtn;
> + }
> +
> + if (CHECK_PID(chip, 0x5208))
> + RTSX_WRITE_REG(chip, ASPM_FORCE_CTL, 0xFF, 0x3F);
> +
> + rtn = rtsx_write_config_byte(chip, LCTLR, chip->aspm_l0s_l1_en);
> + if (rtn != STATUS_SUCCESS)
> + TRACE_RET(chip, STATUS_FAIL);
> +
> + chip->aspm_level[0] = chip->aspm_l0s_l1_en;
> +
> + if (CHK_SDIO_EXIST(chip)) {
> + chip->aspm_level[1] = chip->aspm_l0s_l1_en;
> + rtn = rtsx_write_cfg_dw(chip,
> + CHECK_PID(chip, 0x5288) ? 2 : 1,
> + 0xC0, 0xFF, chip->aspm_l0s_l1_en);
> + if (rtn != STATUS_SUCCESS)
> + TRACE_RET(chip, STATUS_FAIL);
> + }
> +
> + chip->aspm_enabled = 1;
> +
> + return rtn;
> +}
> +
> int rtsx_reset_chip(struct rtsx_chip *chip)
> {
> int retval;
> @@ -288,39 +325,7 @@ int rtsx_reset_chip(struct rtsx_chip *chip)
>
> /* Enable ASPM */
> if (chip->aspm_l0s_l1_en) {
> - if (chip->dynamic_aspm) {
> - if (CHK_SDIO_EXIST(chip)) {
> - if (CHECK_PID(chip, 0x5288)) {
> - retval = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
> - if (retval != STATUS_SUCCESS)
> - TRACE_RET(chip, STATUS_FAIL);
> - }
> - }
> - } else {
> - if (CHECK_PID(chip, 0x5208))
> - RTSX_WRITE_REG(chip, ASPM_FORCE_CTL,
> - 0xFF, 0x3F);
> -
> - retval = rtsx_write_config_byte(chip, LCTLR,
> - chip->aspm_l0s_l1_en);
> - if (retval != STATUS_SUCCESS)
> - TRACE_RET(chip, STATUS_FAIL);
> -
> - chip->aspm_level[0] = chip->aspm_l0s_l1_en;
> - if (CHK_SDIO_EXIST(chip)) {
> - chip->aspm_level[1] = chip->aspm_l0s_l1_en;
> - if (CHECK_PID(chip, 0x5288))
> - retval = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
> - else
> - retval = rtsx_write_cfg_dw(chip, 1, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
> -
> - if (retval != STATUS_SUCCESS)
> - TRACE_RET(chip, STATUS_FAIL);
> -
> - }
> -
> - chip->aspm_enabled = 1;
> - }
> + retval = rtsx_reset_aspm(chip);
> } else {
> if (chip->asic_code && CHECK_PID(chip, 0x5208)) {
> retval = rtsx_write_phy_register(chip, 0x07, 0x0129);
>
>


\
 
 \ /
  Last update: 2014-10-02 18:01    [W:0.041 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site