lkml.org 
[lkml]   [2014]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] clocksource, Add warning to clocksource_delta() validation code


On 10/17/2014 02:27 PM, John Stultz wrote:
> On Fri, Oct 17, 2014 at 11:23 AM, Prarit Bhargava <prarit@redhat.com> wrote:
>>
>>
>> On 10/17/2014 02:17 PM, John Stultz wrote:
>>> On Fri, Oct 17, 2014 at 6:57 AM, Prarit Bhargava <prarit@redhat.com> wrote:
>>>> A bug report came in against an older kernel which output "backward time"
>>>> messages and the report noted that the upstream kernel worked. After some
>>>> investigation it turned out that one of the sockets was bad on the system
>>>> and the "backward time" messages were caused by a real, but intermittent,
>>>> hardware failure.
>>>>
>>>> Commit 09ec54429c6d10f87d1f084de53ae2c1c3a81108 ("clocksource: Move
>>>> cycle_last validation to core code") modifies the x86 clocksource such that
>>>> if a negative delta between two reads of time is calculated the
>>>> clocksource_delta() code will return 0. There is no warning when this
>>>> occurs and there really should be one in order to catch not only hardware
>>>> issues like the issue above, but potential coding issues as the code is
>>>> modified. This patch introduces a WARN() which will also dump a stack
>>>> trace to the console so the exact code path can be evaluated.
>>>>
>>>> I tested this by booting on the broken hardware and left the system idle
>>>> until a negative clocksource_delta() event occurred.
>>>>
>>>> Cc: John Stultz <john.stultz@linaro.org>
>>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>>> Signed-off-by: Prarit Bhargava <prarit@redhat.com>
>>>> ---
>>>> kernel/time/timekeeping_internal.h | 7 ++++++-
>>>> 1 file changed, 6 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/kernel/time/timekeeping_internal.h b/kernel/time/timekeeping_internal.h
>>>> index 4ea005a..abe6bc8 100644
>>>> --- a/kernel/time/timekeeping_internal.h
>>>> +++ b/kernel/time/timekeeping_internal.h
>>>> @@ -17,7 +17,12 @@ static inline cycle_t clocksource_delta(cycle_t now, cycle_t last, cycle_t mask)
>>>> {
>>>> cycle_t ret = (now - last) & mask;
>>>>
>>>> - return (s64) ret > 0 ? ret : 0;
>>>> + if ((s64)ret > 0)
>>>> + return ret;
>>>> +
>>>> + WARN(1, "Clocksource calculated negative delta, %lld. last = %llu, now = %llu, mask = %llx\n",
>>>> + (s64)ret, last, now, mask);
>>>> + return 0;
>>>
>>>
>>> I realize you followed up that this wasn't finished, but just as some
>>> feedback, there's a number of types of hardware where there may be a
>>> very slight skew between cpu TSC, and this will briefly trigger right
>>> after each timekeeping update if a system is reading the clock
>>> frequently (think of the case where the update happens on the cpu
>>> thats just a little bit ahead, while a timestamping loop is running on
>>> a cpu that is a little bit behind).
>>
>> Ah, interesting. Okay ... drop this patch then. Thanks for the info John.
>
> If you're wanting something that aids with debugging, maybe some sort
> calmly stated warn-once in the dmesg might be ok, that or some other
> flag exported via a debugging interface.

IMO with the clock code I'd prefer it to be 100% accurate. There is nothing
more annoying than going through the rigors of debugging and discovering that it
is a hardware issue of some sort... This can be dropped IMO. It's really not
that important.

P.
>
> thanks
> -john
>


\
 
 \ /
  Last update: 2014-10-18 13:21    [W:0.313 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site