lkml.org 
[lkml]   [2014]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv4 3/6] arm: omap3: twl: use the new lookup method with usb phy
Date
Provide complete association for the phy and it's user
(musb) with the new phy lookup method.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
arch/arm/mach-omap2/twl-common.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index b0d54da..0e4f3e3 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -91,18 +91,11 @@ void __init omap_pmic_late_init(void)
}

#if defined(CONFIG_ARCH_OMAP3)
-struct phy_consumer consumers[] = {
- PHY_CONSUMER("musb-hdrc.0", "usb"),
-};
-
-struct phy_init_data init_data = {
- .consumers = consumers,
- .num_consumers = ARRAY_SIZE(consumers),
-};
+static struct phy_lookup twl4030_usb_lookup = PHY_LOOKUP("twl4030_usb",
+ "musb-hdrc.0", "usb");

static struct twl4030_usb_data omap3_usb_pdata = {
- .usb_mode = T2_USB_MODE_ULPI,
- .init_data = &init_data,
+ .usb_mode = T2_USB_MODE_ULPI,
};

static int omap3_batt_table[] = {
@@ -225,8 +218,10 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
}

/* Common platform data configurations */
- if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
+ if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) {
+ phy_register_lookup(&twl4030_usb_lookup);
pmic_data->usb = &omap3_usb_pdata;
+ }

if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
pmic_data->bci = &omap3_bci_pdata;
--
2.1.1


\
 
 \ /
  Last update: 2014-10-17 17:01    [W:0.075 / U:1.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site