[lkml]   [2014]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 0/2] init some clock rate from dts for rk3288
Am Donnerstag, 9. Oktober 2014, 21:50:28 schrieb Kever Yang:
> This patch add init rate for PLLs and some bus clock from dts for rk3288,
> add two clock rate of 400M and 500M into rate table for we will use it.
> We need Doug's patch to make "aclk_cpu" get set properly:
> <>
> Changes in v2:
> - change the PLL setting of 400M to meet the constraints of TRM
> - add review and test tag
> - add some explanation in commit message
> Kever Yang (2):
> clk: rockchip: add 400MHz and 500MHz for rk3288 clock rate
> ARM: dts: enable init rate for clock

I've added both patches to my wip branches for clock and dts.
I've also adapted the subject of the 2nd one to

"ARM: dts: rockchip: enable init rate for clock"

because otherwise people reading the log won't be able to see which subarch
this is.


> arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++
> drivers/clk/rockchip/clk-rk3288.c | 2 ++
> 2 files changed, 12 insertions(+)

 \ /
  Last update: 2014-10-16 23:02    [W:0.067 / U:1.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site