lkml.org 
[lkml]   [2014]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/4] hwmon: ltc2978: device tree bindings documentation
On Wed, Oct 15, 2014 at 01:55:07PM -0500, atull@opensource.altera.com wrote:
> From: Alan Tull <atull@opensource.altera.com>
>
> Add device tree bindings documentation for ltc2978.
>
> Signed-off-by: Alan Tull <atull@opensource.altera.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Mark Brown <broonie@kernel.org>
> ---
> v2: clean whitespace
>
> v3: list compatible strings in single column
> add vendor as lltc
> mention regulators.txt instead of documenting regulator-name
> s/vout_en/vout/
> remove size_cells, address-cells
> use node name to identify regulators
> ---
> .../devicetree/bindings/hwmon/ltc2978.txt | 39 ++++++++++++++++++++
> 1 file changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> new file mode 100644
> index 0000000..16c1227
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> @@ -0,0 +1,39 @@
> +ltc2978
> +
> +Required properties:
> +- compatible: should contain one of:
> + * "lltc,ltc2974"
> + * "lltc,ltc2977"
> + * "lltc,ltc2978"
> + * "lltc,ltc3880"
> + * "lltc,ltc3883"
> + * "lltc,ltm4676"
> +- reg: I2C slave address
> +
> +Optional properties:
> +- regulators: A node that houses a sub-node for each regulator controlled by
> + the device. Each sub-node is identified using the node's name, with valid
> + values listed below. The content of each sub-node is defined by the
> + standard binding for regulators; see regulator.txt.
> +
> +Valid names of regulators depend on number of supplies supported per device:
> + * ltc2974 : vout0 - vout3
> + * ltc2977 : vout0 - vout7
> + * ltc2978 : vout0 - vout7
> + * ltc3880 : vout0 - vout1
> + * ltc3883 : vout0
> + * ltm4676 : vout0 - vout1
> +
> +Example:
> +ltc2978@5e {
> + compatible = "ltc2978";

Nitpick, but still:

"lltc,ltc2978"

> + reg = <0x5e>;
> + regulators {
> + vout0 {
> + regulator-name = "FPGA-2.5V";
> + };
> + vout2 {
> + regulator-name = "FPGA-1.5V";
> + };
> + };
> +};
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2014-10-16 22:21    [W:0.210 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site