lkml.org 
[lkml]   [2014]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform
From
Date

On Oct 14, 2014, at 6:17 PM, Georgi Djakov <gdjakov@mm-sol.com> wrote:

> On 10/10/2014 08:14 PM, Bjorn Andersson wrote:
>> On Tue, Sep 2, 2014 at 8:40 AM, Georgi Djakov <gdjakov@mm-sol.com> wrote:
>>> Enable support for the two SD host controllers on the APQ8084 platform
>>> by adding the required nodes to the DT files.
>>> On the IFC6540 board, the first controller is connected to the onboard
>>> eMMC and the second is connected to a micro-SD card slot.
>>>
>>> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
>>
>> Hi Georgi,
>>
>> This looks sane, but...
>>
>>> ---
>>> arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 11 +++++++++++
>>> arch/arm/boot/dts/qcom-apq8084.dtsi | 23 +++++++++++++++++++++++
>>> 2 files changed, 34 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
>>> index e41cb8a..c9ff108 100644
>>> --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
>>> +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
>> [..]
>>> + sdhci@f98a4900 {
>>> + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
>>> + bus-width = <4>;
>>
>> ...why do you add this node and leave it disabled in the dts?
>>
>
> Hi Bjorn,
> Currently only the eMMC is functional on this board, so now we
> have just the board specific configuration under this node.
> More patches are forthcoming.

Can we add something in the commit message to denote this.

- k

--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project



\
 
 \ /
  Last update: 2014-10-15 10:21    [W:0.101 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site