lkml.org 
[lkml]   [2014]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] gianfar: disable vlan tag insertion by default on 2.6.x
On 10/15/2014 06:15 PM, yzhu1 wrote:
> On 10/15/2014 06:09 PM, Willy Tarreau wrote:
>> Hi Zhu,
>>
>> On Wed, Oct 15, 2014 at 06:00:33PM +0800, Zhu Yanjun wrote:
>>> In commit f43c75d4b6[gianfar: disable TX vlan based on kernel 2.6.x],
>>> gianfar nic disables TX vlan. But gianfar nic enables vlan tag
>>> insertion by default. This will lead to unusable connections on
>>> some configurations. Since vlan tag insertion is disabled by default
>>> and it is not enabled any longer, it is not necessary to disable it
>>> again.
>>>
>>> Zhu Yanjun (1):
>>> gianfar: disable vlan tag insertion by default
>>>
>>> drivers/net/gianfar.c | 6 ------
>>> 1 file changed, 6 deletions(-)
>>>
>>> --
>>> 1.9.1
>> There's no patch in this e-mail. Since you sent another e-mail with
>> almost
>> the same subject, I'm confused, it's unclear to me whether I only
>> need to
>> apply the patch in the other one with this commit message or if it's
>> just
>> that you accidently dropped the patch when sending this e-mail. Could
>> you
>> please enlighten me ?
>>
>> Thanks,
>> Willy
>>
> Hi, Willy
>
> Sorry. Please apply the patch in the other one with this commit message.
>
> Thanks a lot.
> Zhu Yanjun
>
Hi, Willy

Sorry, it is my fault. Please apply this patch in the attachment.

Thanks a lot.
Zhu Yanjun

From 48cb11f57e363e8831c4bcaa854d6df23ca300f7 Mon Sep 17 00:00:00 2001
From: Zhu Yanjun <Yanjun.Zhu@windriver.com>
Date: Wed, 15 Oct 2014 16:52:51 +0800
Subject: [PATCH] gianfar: disable vlan tag insertion by default

2.6.x kernels require a similar logic change as commit 51b8cbfc
[gianfar: fix bug caused by e1653c3e] introduces for newer kernels.

Gianfar driver originally enables vlan tag insertion by default.
This will lead to unusable connections on some configurations.

Since gianfar nic vlan tag insertion is disabled by default and
it is not enabled any longer, it is not necessary to disable it
again.

Reported-by: Xu Jianrong <roy.xu@huawei.com>
Suggested-by: Wang Feng <sky.wangfeng@huawei.com>
Signed-off-by: Zhu Yanjun <Yanjun.Zhu@windriver.com>
---
drivers/net/gianfar.c | 6 ------
1 file changed, 6 deletions(-)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 8aa2cf6..afdcb41 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1115,7 +1115,6 @@ int startup_gfar(struct net_device *dev)
/* keep vlan related bits if it's enabled */
if (priv->vlgrp) {
rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
- tctrl |= TCTRL_VLINS;
}

/* Init rctrl based on our settings */
@@ -1456,11 +1455,6 @@ static void gfar_vlan_rx_register(struct net_device *dev,
tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
gfar_write(&priv->regs->rctrl, tempval);
} else {
- /* Disable VLAN tag insertion */
- tempval = gfar_read(&priv->regs->tctrl);
- tempval &= ~TCTRL_VLINS;
- gfar_write(&priv->regs->tctrl, tempval);
-
/* Disable VLAN tag extraction */
tempval = gfar_read(&priv->regs->rctrl);
tempval &= ~RCTRL_VLEX;
--
1.9.1
\
 
 \ /
  Last update: 2014-10-15 13:01    [W:0.041 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site