lkml.org 
[lkml]   [2014]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC
From
On Tue, Oct 14, 2014 at 2:13 PM, Krzysztof Kozłowski
<k.kozlowski@samsung.com> wrote:
> On 14.10.2014 10:14, Thomas Abraham wrote:
>> Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
>> is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
>>
>> Cc: devicetree@vger.kernel.org
>> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
>> ---
>> Documentation/devicetree/bindings/mfd/s2mps11.txt | 11 ++++++++---
>> 1 files changed, 8 insertions(+), 3 deletions(-)
>
> Looks good.
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> P.S. Wrong devicetree-discuss@lists.ozlabs.org list? I receive bounces.

Yes, that was wrong. Thanks for correcting it.

Regards,
Thomas.

>
> Best regards,
> Krzysztof
>
>
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> index 0e4026a..41ee3f5 100644
>> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> @@ -1,5 +1,5 @@
>>
>> -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
>> +* Samsung S2MPS11/14/15 and S2MPU02 Voltage and Current Regulator
>>
>> The Samsung S2MPS11 is a multi-function device which includes voltage and
>> current regulators, RTC, charger controller and other sub-blocks. It is
>> @@ -7,8 +7,11 @@ interfaced to the host controller using an I2C interface. Each sub-block is
>> addressed by the host system using different I2C slave addresses.
>>
>> Required properties:
>> -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
>> - or "samsung,s2mpu02-pmic".
>> +- compatible: Should be one of the following
>> + - "samsung,s2mps11-pmic"
>> + - "samsung,s2mps14-pmic"
>> + - "samsung,s2mps15-pmic"
>> + - "samsung,s2mpu02-pmic"
>> - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
>>
>> Optional properties:
>> @@ -82,12 +85,14 @@ as per the datasheet of s2mps11.
>> - valid values for n are:
>> - S2MPS11: 1 to 38
>> - S2MPS14: 1 to 25
>> + - S2MPS15: 1 to 27
>> - S2MPU02: 1 to 28
>> - Example: LDO1, LDO2, LDO28
>> - BUCKn
>> - valid values for n are:
>> - S2MPS11: 1 to 10
>> - S2MPS14: 1 to 5
>> + - S2MPS15: 1 to 10
>> - S2MPU02: 1 to 7
>> - Example: BUCK1, BUCK2, BUCK9
>>
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-14 15:21    [W:0.049 / U:1.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site