lkml.org 
[lkml]   [2014]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] regulator: s2mps11: add support for S2MPS15 regulators
From
On Tue, Oct 14, 2014 at 2:18 PM, Krzysztof Kozłowski
<k.kozlowski@samsung.com> wrote:
> On 14.10.2014 10:17, Thomas Abraham wrote:
>> The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
>> 27 LDO and 10 Buck regulators and allows programming these regulators via a
>> I2C interface. This patch adds initial support for LDO/Buck regulators of
>> S2MPS15 PMIC.
>>
>> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
>
> Just two questions/ideas:
> 1. No specific steps for suspend?

Yes, it is required but I have not tested it yet. I will post the
suspend related changes when it has been tested.

> 2. Maybe add S2MPS15 to MODULE_DESCRIPTION and Kconfig?

Okay, I will do that along in the next set of update patches for s2mps15.

>
> Anyway rest looks fine.
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Thanks Krzysztof.

Regards,
Thomas.

>
> Best regards,
> Krzysztof
>
>> ---
>> drivers/regulator/s2mps11.c | 133 +++++++++++++++++++++++++++++++++++++++++++
>> 1 files changed, 133 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
>> index adab82d..e176fbb 100644
>> --- a/drivers/regulator/s2mps11.c
>> +++ b/drivers/regulator/s2mps11.c
>> @@ -31,6 +31,7 @@
>> #include <linux/mfd/samsung/core.h>
>> #include <linux/mfd/samsung/s2mps11.h>
>> #include <linux/mfd/samsung/s2mps14.h>
>> +#include <linux/mfd/samsung/s2mps15.h>
>> #include <linux/mfd/samsung/s2mpu02.h>
>>
>> struct s2mps11_info {
>> @@ -529,6 +530,133 @@ static const struct regulator_desc s2mps14_regulators[] = {
>> regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV),
>> };
>>
>> +static struct regulator_ops s2mps15_reg_ldo_ops = {
>> + .list_voltage = regulator_list_voltage_linear_range,
>> + .map_voltage = regulator_map_voltage_linear_range,
>> + .is_enabled = regulator_is_enabled_regmap,
>> + .enable = regulator_enable_regmap,
>> + .disable = regulator_disable_regmap,
>> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
>> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
>> +};
>> +
>> +static struct regulator_ops s2mps15_reg_buck_ops = {
>> + .list_voltage = regulator_list_voltage_linear_range,
>> + .map_voltage = regulator_map_voltage_linear_range,
>> + .is_enabled = regulator_is_enabled_regmap,
>> + .enable = regulator_enable_regmap,
>> + .disable = regulator_disable_regmap,
>> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
>> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
>> + .set_voltage_time_sel = regulator_set_voltage_time_sel,
>> +};
>> +
>> +#define regulator_desc_s2mps15_ldo(num, range) { \
>> + .name = "LDO"#num, \
>> + .id = S2MPS15_LDO##num, \
>> + .ops = &s2mps15_reg_ldo_ops, \
>> + .type = REGULATOR_VOLTAGE, \
>> + .owner = THIS_MODULE, \
>> + .linear_ranges = range, \
>> + .n_linear_ranges = ARRAY_SIZE(range), \
>> + .n_voltages = S2MPS15_LDO_N_VOLTAGES, \
>> + .vsel_reg = S2MPS15_REG_L1CTRL + num - 1, \
>> + .vsel_mask = S2MPS15_LDO_VSEL_MASK, \
>> + .enable_reg = S2MPS15_REG_L1CTRL + num - 1, \
>> + .enable_mask = S2MPS15_ENABLE_MASK \
>> +}
>> +
>> +#define regulator_desc_s2mps15_buck(num, range) { \
>> + .name = "BUCK"#num, \
>> + .id = S2MPS15_BUCK##num, \
>> + .ops = &s2mps15_reg_buck_ops, \
>> + .type = REGULATOR_VOLTAGE, \
>> + .owner = THIS_MODULE, \
>> + .linear_ranges = range, \
>> + .n_linear_ranges = ARRAY_SIZE(range), \
>> + .ramp_delay = 12500, \
>> + .n_voltages = S2MPS15_BUCK_N_VOLTAGES, \
>> + .vsel_reg = S2MPS15_REG_B1CTRL2 + ((num - 1) * 2), \
>> + .vsel_mask = S2MPS15_BUCK_VSEL_MASK, \
>> + .enable_reg = S2MPS15_REG_B1CTRL1 + ((num - 1) * 2), \
>> + .enable_mask = S2MPS14_ENABLE_MASK \
>> +}
>> +
>> +/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
>> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
>> + REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
>> +};
>> +
>> +/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
>> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
>> + REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
>> +};
>> +
>> +/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
>> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
>> + REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
>> +};
>> +
>> +/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
>> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
>> + REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000),
>> +};
>> +
>> +/* voltage range for s2mps15 LDO 1 */
>> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
>> + REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
>> +};
>> +
>> +/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
>> +static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
>> + REGULATOR_LINEAR_RANGE(500000, 0x10, 0xb0, 6250),
>> +};
>> +
>> +/* voltage range for s2mps15 BUCK 8, 9 and 10 */
>> +static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
>> + REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500),
>> +};
>> +
>> +static const struct regulator_desc s2mps15_regulators[] = {
>> + regulator_desc_s2mps15_ldo(1, s2mps15_ldo_voltage_ranges5),
>> + regulator_desc_s2mps15_ldo(2, s2mps15_ldo_voltage_ranges2),
>> + regulator_desc_s2mps15_ldo(3, s2mps15_ldo_voltage_ranges1),
>> + regulator_desc_s2mps15_ldo(4, s2mps15_ldo_voltage_ranges3),
>> + regulator_desc_s2mps15_ldo(5, s2mps15_ldo_voltage_ranges1),
>> + regulator_desc_s2mps15_ldo(6, s2mps15_ldo_voltage_ranges2),
>> + regulator_desc_s2mps15_ldo(7, s2mps15_ldo_voltage_ranges4),
>> + regulator_desc_s2mps15_ldo(8, s2mps15_ldo_voltage_ranges4),
>> + regulator_desc_s2mps15_ldo(9, s2mps15_ldo_voltage_ranges4),
>> + regulator_desc_s2mps15_ldo(10, s2mps15_ldo_voltage_ranges4),
>> + regulator_desc_s2mps15_ldo(11, s2mps15_ldo_voltage_ranges3),
>> + regulator_desc_s2mps15_ldo(12, s2mps15_ldo_voltage_ranges3),
>> + regulator_desc_s2mps15_ldo(13, s2mps15_ldo_voltage_ranges3),
>> + regulator_desc_s2mps15_ldo(14, s2mps15_ldo_voltage_ranges2),
>> + regulator_desc_s2mps15_ldo(15, s2mps15_ldo_voltage_ranges1),
>> + regulator_desc_s2mps15_ldo(16, s2mps15_ldo_voltage_ranges1),
>> + regulator_desc_s2mps15_ldo(17, s2mps15_ldo_voltage_ranges2),
>> + regulator_desc_s2mps15_ldo(18, s2mps15_ldo_voltage_ranges1),
>> + regulator_desc_s2mps15_ldo(19, s2mps15_ldo_voltage_ranges2),
>> + regulator_desc_s2mps15_ldo(20, s2mps15_ldo_voltage_ranges1),
>> + regulator_desc_s2mps15_ldo(21, s2mps15_ldo_voltage_ranges2),
>> + regulator_desc_s2mps15_ldo(22, s2mps15_ldo_voltage_ranges3),
>> + regulator_desc_s2mps15_ldo(23, s2mps15_ldo_voltage_ranges1),
>> + regulator_desc_s2mps15_ldo(24, s2mps15_ldo_voltage_ranges2),
>> + regulator_desc_s2mps15_ldo(25, s2mps15_ldo_voltage_ranges2),
>> + regulator_desc_s2mps15_ldo(26, s2mps15_ldo_voltage_ranges3),
>> + regulator_desc_s2mps15_ldo(27, s2mps15_ldo_voltage_ranges1),
>> + regulator_desc_s2mps15_buck(1, s2mps15_buck_voltage_ranges1),
>> + regulator_desc_s2mps15_buck(2, s2mps15_buck_voltage_ranges1),
>> + regulator_desc_s2mps15_buck(3, s2mps15_buck_voltage_ranges1),
>> + regulator_desc_s2mps15_buck(4, s2mps15_buck_voltage_ranges1),
>> + regulator_desc_s2mps15_buck(5, s2mps15_buck_voltage_ranges1),
>> + regulator_desc_s2mps15_buck(6, s2mps15_buck_voltage_ranges1),
>> + regulator_desc_s2mps15_buck(7, s2mps15_buck_voltage_ranges1),
>> + regulator_desc_s2mps15_buck(8, s2mps15_buck_voltage_ranges2),
>> + regulator_desc_s2mps15_buck(9, s2mps15_buck_voltage_ranges2),
>> + regulator_desc_s2mps15_buck(10, s2mps15_buck_voltage_ranges2),
>> +};
>> +
>> static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
>> struct regulator_dev *rdev)
>> {
>> @@ -835,6 +963,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
>> s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
>> regulators = s2mps14_regulators;
>> break;
>> + case S2MPS15X:
>> + s2mps11->rdev_num = ARRAY_SIZE(s2mps15_regulators);
>> + regulators = s2mps15_regulators;
>> + break;
>> case S2MPU02:
>> s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
>> regulators = s2mpu02_regulators;
>> @@ -928,6 +1060,7 @@ out:
>> static const struct platform_device_id s2mps11_pmic_id[] = {
>> { "s2mps11-pmic", S2MPS11X},
>> { "s2mps14-pmic", S2MPS14X},
>> + { "s2mps15-pmic", S2MPS15X},
>> { "s2mpu02-pmic", S2MPU02},
>> { },
>> };
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-14 15:21    [W:0.080 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site