lkml.org 
[lkml]   [2014]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] mm: Introduce a general RCU get_user_pages_fast.
On Tue, Oct 14, 2014 at 05:38:43PM +0530, Aneesh Kumar K.V wrote:
> Steve Capper <steve.capper@linaro.org> writes:
>
> > On Tue, Oct 14, 2014 at 04:27:53PM +0530, Aneesh Kumar K.V wrote:
> >> get_user_pages_fast attempts to pin user pages by walking the page
> >> tables directly and avoids taking locks. Thus the walker needs to be
> >> protected from page table pages being freed from under it, and needs
> >> to block any THP splits.
> >>
> >> One way to achieve this is to have the walker disable interrupts, and
> >> rely on IPIs from the TLB flushing code blocking before the page table
> >> pages are freed.
> >>
> >> On some platforms we have hardware broadcast of TLB invalidations, thus
> >> the TLB flushing code doesn't necessarily need to broadcast IPIs; and
> >> spuriously broadcasting IPIs can hurt system performance if done too
> >> often.
> >>
> >> This problem has been solved on PowerPC and Sparc by batching up page
> >> table pages belonging to more than one mm_user, then scheduling an
> >> rcu_sched callback to free the pages. This RCU page table free logic
> >> has been promoted to core code and is activated when one enables
> >> HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement
> >> their own get_user_pages_fast routines.
> >>
> >> The RCU page table free logic coupled with a an IPI broadcast on THP
> >> split (which is a rare event), allows one to protect a page table
> >> walker by merely disabling the interrupts during the walk.
> >>
> >> This patch provides a general RCU implementation of get_user_pages_fast
> >> that can be used by architectures that perform hardware broadcast of
> >> TLB invalidations.
> >>
> >> It is based heavily on the PowerPC implementation.
> >>
> >> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> >> ---
> >>
> >> NOTE: I kept the description of patch as it is and also retained the documentation.
> >> I also dropped the tested-by and other SOB, because i was not sure whether they want
> >> to be blamed for the bugs here. Please feel free to update.
> >
> > Hi Aneesh,
> > Thank you for coding this up.
> >
> > I've compiled and briefly tested this on arm (with and without LPAE),
> > and arm64. I ran a custom futex on THP tail test, and this passed.
> > I'll test this a little more aggressively with ltp.
> >
> > I think Linus has already pulled in the RCU gup I posted, could you
> > please instead write a patch against?
>
> Will do that.
>
> > 2667f50 mm: introduce a general RCU get_user_pages_fast()
>
> In that patch don't you need to check the _PAGE_PRESENT details in case
> of gup_huge_pmd ?
>

Before calling gup_huge_pmd we check for pmd_none. On ARM we have:
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_present(pmd) (pmd_val(pmd))

So we know when we enter gup_huge_pmd that "orig" represents a pmd that
is present.

On PowerPC I see the definitions are a little different for
pgtable-ppc32.h:
#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)

A pmd_present() could be added to the beginning of gup_huge_pmd safely
if this is needed for PowerPC.

Cheers,
--
Steve


\
 
 \ /
  Last update: 2014-10-14 15:01    [W:0.060 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site