lkml.org 
[lkml]   [2014]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] PMIC / opregion: support PMIC customized operation region for CrystalCove
On Thu, Oct 09, 2014 at 05:21:28PM +0800, Aaron Lu wrote:
> On 10/08/2014 04:05 PM, Lee Jones wrote:
> > To all those CC'ed,
> >
> >> The Baytrail-T platform firmware has defined two customized operation
> >> regions for PMIC chip Crystal Cove - one is for power resource handling
> >> and one is for thermal: sensor temperature reporting, trip point setting,
> >> etc. This patch adds support for them on top of the existing Crystal Cove
> >> PMIC driver.
> >>
> >> The reason to split code into a separate file intel_soc_pmic_opregion.c
> >> is that there are more PMIC driver with ACPI operation region support
> >> coming and we can re-use those code. The intel_soc_pmic_opregion_data
> >> structure is created also for this purpose: when we need to support a
> >> new PMIC's operation region, we just need to fill those callbacks and
> >> the two register mapping tables.
> >>
> >> Signed-off-by: Aaron Lu <aaron.lu@intel.com>
> >> ---
> >> drivers/mfd/Kconfig | 11 +
> >> drivers/mfd/Makefile | 1 +
> >> drivers/mfd/intel_soc_pmic_crc.c | 3 +
> >> drivers/mfd/intel_soc_pmic_crc_opregion.c | 229 +++++++++++++++++++
> >> drivers/mfd/intel_soc_pmic_opregion.c | 350 ++++++++++++++++++++++++++++++
> >> drivers/mfd/intel_soc_pmic_opregion.h | 35 +++
> >
> > With the influx of new same-chip devices, I think the MFD subsystem is
> > fast becoming overloaded. I think all of the PMIC handling should in
> > fact either live in Regulators or have its own subsystem.
> >
> > Let's open this up to the floor by Cc'ing some probable interested
> > parties.
>
> The ACPI operation region handler provides implementation for the ASL
> code written by firmware developer, and since the ACPI PMIC device node
> has two customized operation regions: power rail handling and thermal
> sensor manipulating, implementing the handler will inevitably touch
> power rail registers and thermal registers of the PMIC chip. In this
> regard, it doesn't fit what the MFD subsystem is meant to contain(
> according to your comments, I didn't know this before, sorry about that).
>
> It seems that we have two options:
> 1 Create two cell devices from the PMIC I2C driver, one for power and
> one for thermal; the driver for the power part goes to drivers/power
> or drivers/regulator and the driver for thermal one goes to
> drivers/thermal;
> The problem of this approach is that, the operation region handler
> driver doesn't really need to expose those power or thermal sysfs
> interfaces for user space to consume, perhaps it shouldn't, as its
> sole purpose is to satisfy the ASL code access, not more.
> 2 Move these operation region handler drivers to drivers/acpi
> We now have EC operation region handler driver there, but we also have
> I2C, GPIO, i915 operation region handlers in their own subsystems. Not
> sure if PMIC operation region handler qualifies there.

Rafael,

May I have your opinion on option 2? Do you think it is OK to place the
operation region code under drivers/acpi? Thanks.

Regards,
Aaron

>
> Suggestions are welcome.
>
> Thanks,
> Aaron
>
> >
> > [Leaving the driver code in, but my comments stop here]
> >
> >> 6 files changed, 629 insertions(+)
> >> create mode 100644 drivers/mfd/intel_soc_pmic_crc_opregion.c
> >> create mode 100644 drivers/mfd/intel_soc_pmic_opregion.c
> >> create mode 100644 drivers/mfd/intel_soc_pmic_opregion.h
> >>
> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> >> index de5abf244746..77a7229058a6 100644
> >> --- a/drivers/mfd/Kconfig
> >> +++ b/drivers/mfd/Kconfig
> >> @@ -266,6 +266,17 @@ config INTEL_SOC_PMIC
> >> thermal, charger and related power management functions
> >> on these systems.
> >>
> >> +config CRC_PMIC_OPREGION
> >> + tristate "ACPI operation region support for CrystalCove PMIC"
> >> + depends on ACPI
> >> + depends on INTEL_SOC_PMIC
> >> + help
> >> + Select this option to enable support for ACPI operation
> >> + region of the PMIC chip. The operation region can be used
> >> + to control power rails and sensor reading/writing on the
> >> + PMIC chip. This config addes ACPI operation region support
> >> + for CrystalCove PMIC.
> >> +
> >> config MFD_INTEL_MSIC
> >> bool "Intel MSIC"
> >> depends on INTEL_SCU_IPC
> >> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> >> index f00148782d9b..e02f0573e293 100644
> >> --- a/drivers/mfd/Makefile
> >> +++ b/drivers/mfd/Makefile
> >> @@ -172,3 +172,4 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
> >>
> >> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> >> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> >> +obj-$(CONFIG_CRC_PMIC_OPREGION) += intel_soc_pmic_crc_opregion.o intel_soc_pmic_opregion.o
> >> diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c
> >> index 7107cab832e6..48845d636bba 100644
> >> --- a/drivers/mfd/intel_soc_pmic_crc.c
> >> +++ b/drivers/mfd/intel_soc_pmic_crc.c
> >> @@ -106,6 +106,9 @@ static struct mfd_cell crystal_cove_dev[] = {
> >> .num_resources = ARRAY_SIZE(gpio_resources),
> >> .resources = gpio_resources,
> >> },
> >> + {
> >> + .name = "crystal_cove_region",
> >> + },
> >> };
> >>
> >> static struct regmap_config crystal_cove_regmap_config = {
> >> diff --git a/drivers/mfd/intel_soc_pmic_crc_opregion.c b/drivers/mfd/intel_soc_pmic_crc_opregion.c
> >> new file mode 100644
> >> index 000000000000..27b67dc3fa8d
> >> --- /dev/null
> >> +++ b/drivers/mfd/intel_soc_pmic_crc_opregion.c
> >> @@ -0,0 +1,229 @@
> >> +/*
> >> + * intel_soc_pmic_crc_opregion.c - Intel SoC PMIC operation region Driver
> >> + *
> >> + * Copyright (C) 2014 Intel Corporation. All rights reserved.
> >> + *
> >> + * This program is free software; you can redistribute it and/or
> >> + * modify it under the terms of the GNU General Public License version
> >> + * 2 as published by the Free Software Foundation.
> >> + *
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >> + * GNU General Public License for more details.
> >> + */
> >> +
> >> +#include <linux/module.h>
> >> +#include <linux/acpi.h>
> >> +#include <linux/mfd/intel_soc_pmic.h>
> >> +#include <linux/regmap.h>
> >> +#include <linux/platform_device.h>
> >> +#include "intel_soc_pmic_opregion.h"
> >> +
> >> +#define PWR_SOURCE_SELECT BIT(1)
> >> +
> >> +#define PMIC_A0LOCK_REG 0xc5
> >> +
> >> +static struct pmic_pwr_table pwr_table[] = {
> >> + {
> >> + .address = 0x24,
> >> + .pwr_reg = {
> >> + .reg = 0x66,
> >> + .bit = 0x00,
> >> + },
> >> + }, /* X285 -> V2P85SX, camara */
> >> + {
> >> + .address = 0x48,
> >> + .pwr_reg = {
> >> + .reg = 0x5d,
> >> + .bit = 0x00,
> >> + },
> >> + }, /* V18X -> V1P8SX, eMMC/camara/audio */
> >> +};
> >> +
> >> +static struct pmic_dptf_table dptf_table[] = {
> >> + {
> >> + .address = 0x00,
> >> + .reg = 0x75
> >> + }, /* TMP0 -> SYS0_THRM_RSLT_L */
> >> + {
> >> + .address = 0x04,
> >> + .reg = 0x95
> >> + }, /* AX00 -> SYS0_THRMALRT0_L */
> >> + {
> >> + .address = 0x08,
> >> + .reg = 0x97
> >> + }, /* AX01 -> SYS0_THRMALRT1_L */
> >> + {
> >> + .address = 0x0c,
> >> + .reg = 0x77
> >> + }, /* TMP1 -> SYS1_THRM_RSLT_L */
> >> + {
> >> + .address = 0x10,
> >> + .reg = 0x9a
> >> + }, /* AX10 -> SYS1_THRMALRT0_L */
> >> + {
> >> + .address = 0x14,
> >> + .reg = 0x9c
> >> + }, /* AX11 -> SYS1_THRMALRT1_L */
> >> + {
> >> + .address = 0x18,
> >> + .reg = 0x79
> >> + }, /* TMP2 -> SYS2_THRM_RSLT_L */
> >> + {
> >> + .address = 0x1c,
> >> + .reg = 0x9f
> >> + }, /* AX20 -> SYS2_THRMALRT0_L */
> >> + {
> >> + .address = 0x20,
> >> + .reg = 0xa1
> >> + }, /* AX21 -> SYS2_THRMALRT1_L */
> >> + {
> >> + .address = 0x48,
> >> + .reg = 0x94
> >> + }, /* PEN0 -> SYS0_THRMALRT0_H */
> >> + {
> >> + .address = 0x4c,
> >> + .reg = 0x99
> >> + }, /* PEN1 -> SYS1_THRMALRT1_H */
> >> + {
> >> + .address = 0x50,
> >> + .reg = 0x9e
> >> + }, /* PEN2 -> SYS2_THRMALRT2_H */
> >> +};
> >> +
> >> +static int intel_crc_pmic_get_power(struct regmap *regmap,
> >> + struct pmic_pwr_reg *preg, u64 *value)
> >> +{
> >> + int data;
> >> +
> >> + if (regmap_read(regmap, preg->reg, &data))
> >> + return -EIO;
> >> +
> >> + *value = (data & PWR_SOURCE_SELECT) && (data & BIT(preg->bit)) ? 1 : 0;
> >> + return 0;
> >> +}
> >> +
> >> +static int intel_crc_pmic_update_power(struct regmap *regmap,
> >> + struct pmic_pwr_reg *preg, bool on)
> >> +{
> >> + int data;
> >> +
> >> + if (regmap_read(regmap, preg->reg, &data))
> >> + return -EIO;
> >> +
> >> + if (on) {
> >> + data |= PWR_SOURCE_SELECT | BIT(preg->bit);
> >> + } else {
> >> + data &= ~BIT(preg->bit);
> >> + data |= PWR_SOURCE_SELECT;
> >> + }
> >> +
> >> + if (regmap_write(regmap, preg->reg, data))
> >> + return -EIO;
> >> + return 0;
> >> +}
> >> +
> >> +/* Raw temperature value is 10bits: 8bits in reg and 2bits in reg-1 bit0,1 */
> >> +static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg)
> >> +{
> >> + int temp_l, temp_h;
> >> +
> >> + if (regmap_read(regmap, reg, &temp_l) ||
> >> + regmap_read(regmap, reg - 1, &temp_h))
> >> + return -EIO;
> >> +
> >> + return (temp_l | ((temp_h & 0x3) << 8));
> >> +}
> >> +
> >> +static int
> >> +intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
> >> +{
> >> + if (regmap_write(regmap, reg, raw) ||
> >> + regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8))
> >> + return -EIO;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int
> >> +intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value)
> >> +{
> >> + int pen;
> >> +
> >> + if (regmap_read(regmap, reg, &pen))
> >> + return -EIO;
> >> + *value = pen >> 7;
> >> + return 0;
> >> +}
> >> +
> >> +static int intel_crc_pmic_update_policy(struct regmap *regmap,
> >> + int reg, int enable)
> >> +{
> >> + int alert0;
> >> +
> >> + /* Update to policy enable bit requires unlocking a0lock */
> >> + if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0))
> >> + return -EIO;
> >> + if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0))
> >> + return -EIO;
> >> +
> >> + if (regmap_update_bits(regmap, reg, 0x80, enable << 7))
> >> + return -EIO;
> >> +
> >> + /* restore alert0 */
> >> + if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0))
> >> + return -EIO;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static struct intel_soc_pmic_opregion_data intel_crc_pmic_opregion_data = {
> >> + .get_power = intel_crc_pmic_get_power,
> >> + .update_power = intel_crc_pmic_update_power,
> >> + .get_raw_temp = intel_crc_pmic_get_raw_temp,
> >> + .update_aux = intel_crc_pmic_update_aux,
> >> + .get_policy = intel_crc_pmic_get_policy,
> >> + .update_policy = intel_crc_pmic_update_policy,
> >> + .pwr_table = pwr_table,
> >> + .pwr_table_count= ARRAY_SIZE(pwr_table),
> >> + .dptf_table = dptf_table,
> >> + .dptf_table_count = ARRAY_SIZE(dptf_table),
> >> +};
> >> +
> >> +static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
> >> +{
> >> + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
> >> + return intel_soc_pmic_install_opregion_handler(&pdev->dev,
> >> + ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
> >> + &intel_crc_pmic_opregion_data);
> >> +}
> >> +
> >> +static int intel_crc_pmic_opregion_remove(struct platform_device *pdev)
> >> +{
> >> + intel_soc_pmic_remove_opregion_handler(ACPI_HANDLE(pdev->dev.parent));
> >> + return 0;
> >> +}
> >> +
> >> +#define DRV_NAME "crystal_cove_region"
> >> +
> >> +static struct platform_device_id crystal_cove_opregion_id_table[] = {
> >> + { .name = DRV_NAME },
> >> + {},
> >> +};
> >> +
> >> +static struct platform_driver intel_crc_pmic_opregion_driver = {
> >> + .probe = intel_crc_pmic_opregion_probe,
> >> + .remove = intel_crc_pmic_opregion_remove,
> >> + .id_table = crystal_cove_opregion_id_table,
> >> + .driver = {
> >> + .name = DRV_NAME,
> >> + },
> >> +};
> >> +
> >> +MODULE_DEVICE_TABLE(platform, crystal_cove_opregion_id_table);
> >> +
> >> +module_platform_driver(intel_crc_pmic_opregion_driver);
> >> +
> >> +MODULE_DESCRIPTION("CrystalCove ACPI opregion driver");
> >> +MODULE_LICENSE("GPL");
> >> diff --git a/drivers/mfd/intel_soc_pmic_opregion.c b/drivers/mfd/intel_soc_pmic_opregion.c
> >> new file mode 100644
> >> index 000000000000..62824a35ce97
> >> --- /dev/null
> >> +++ b/drivers/mfd/intel_soc_pmic_opregion.c
> >> @@ -0,0 +1,350 @@
> >> +/*
> >> + * intel_soc_pmic_opregion.c - Intel SoC PMIC operation region Driver
> >> + *
> >> + * Copyright (C) 2014 Intel Corporation. All rights reserved.
> >> + *
> >> + * This program is free software; you can redistribute it and/or
> >> + * modify it under the terms of the GNU General Public License version
> >> + * 2 as published by the Free Software Foundation.
> >> + *
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >> + * GNU General Public License for more details.
> >> + */
> >> +
> >> +#include <linux/module.h>
> >> +#include <linux/acpi.h>
> >> +#include <linux/regmap.h>
> >> +#include "intel_soc_pmic_opregion.h"
> >> +
> >> +#define PMIC_PMOP_OPREGION_ID 0x8d
> >> +#define PMIC_DPTF_OPREGION_ID 0x8c
> >> +
> >> +struct acpi_lpat {
> >> + int temp;
> >> + int raw;
> >> +};
> >> +
> >> +struct intel_soc_pmic_opregion {
> >> + struct mutex lock;
> >> + struct acpi_lpat *lpat;
> >> + int lpat_count;
> >> + struct regmap *regmap;
> >> + struct intel_soc_pmic_opregion_data *data;
> >> +};
> >> +
> >> +static struct pmic_pwr_reg *
> >> +pmic_get_pwr_reg(int address, struct pmic_pwr_table *table, int count)
> >> +{
> >> + int i;
> >> +
> >> + for (i = 0; i < count; i++) {
> >> + if (table[i].address == address)
> >> + return &table[i].pwr_reg;
> >> + }
> >> + return NULL;
> >> +}
> >> +
> >> +static int
> >> +pmic_get_dptf_reg(int address, struct pmic_dptf_table *table, int count)
> >> +{
> >> + int i;
> >> +
> >> + for (i = 0; i < count; i++) {
> >> + if (table[i].address == address)
> >> + return table[i].reg;
> >> + }
> >> + return -ENOENT;
> >> +}
> >> +
> >> +/* Return temperature from raw value through LPAT table */
> >> +static int raw_to_temp(struct acpi_lpat *lpat, int count, int raw)
> >> +{
> >> + int i, delta_temp, delta_raw, temp;
> >> +
> >> + for (i = 0; i < count - 1; i++) {
> >> + if ((raw >= lpat[i].raw && raw <= lpat[i+1].raw) ||
> >> + (raw <= lpat[i].raw && raw >= lpat[i+1].raw))
> >> + break;
> >> + }
> >> +
> >> + if (i == count - 1)
> >> + return -ENOENT;
> >> +
> >> + delta_temp = lpat[i+1].temp - lpat[i].temp;
> >> + delta_raw = lpat[i+1].raw - lpat[i].raw;
> >> + temp = lpat[i].temp + (raw - lpat[i].raw) * delta_temp / delta_raw;
> >> +
> >> + return temp;
> >> +}
> >> +
> >> +/* Return raw value from temperature through LPAT table */
> >> +static int temp_to_raw(struct acpi_lpat *lpat, int count, int temp)
> >> +{
> >> + int i, delta_temp, delta_raw, raw;
> >> +
> >> + for (i = 0; i < count - 1; i++) {
> >> + if (temp >= lpat[i].temp && temp <= lpat[i+1].temp)
> >> + break;
> >> + }
> >> +
> >> + if (i == count - 1)
> >> + return -ENOENT;
> >> +
> >> + delta_temp = lpat[i+1].temp - lpat[i].temp;
> >> + delta_raw = lpat[i+1].raw - lpat[i].raw;
> >> + raw = lpat[i].raw + (temp - lpat[i].temp) * delta_raw / delta_temp;
> >> +
> >> + return raw;
> >> +}
> >> +
> >> +static void
> >> +pmic_dptf_lpat(struct intel_soc_pmic_opregion *opregion, acpi_handle handle,
> >> + struct device *dev)
> >> +{
> >> + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> >> + union acpi_object *obj_p, *obj_e;
> >> + int *lpat, i;
> >> + acpi_status status;
> >> +
> >> + status = acpi_evaluate_object(handle, "LPAT", NULL, &buffer);
> >> + if (ACPI_FAILURE(status))
> >> + return;
> >> +
> >> + obj_p = (union acpi_object *)buffer.pointer;
> >> + if (!obj_p || (obj_p->type != ACPI_TYPE_PACKAGE) ||
> >> + (obj_p->package.count % 2) || (obj_p->package.count < 4))
> >> + goto out;
> >> +
> >> + lpat = devm_kmalloc(dev, sizeof(*lpat) * obj_p->package.count,
> >> + GFP_KERNEL);
> >> + if (!lpat)
> >> + goto out;
> >> +
> >> + for (i = 0; i < obj_p->package.count; i++) {
> >> + obj_e = &obj_p->package.elements[i];
> >> + if (obj_e->type != ACPI_TYPE_INTEGER)
> >> + goto out;
> >> + lpat[i] = obj_e->integer.value;
> >> + }
> >> +
> >> + opregion->lpat = (struct acpi_lpat *)lpat;
> >> + opregion->lpat_count = obj_p->package.count / 2;
> >> +
> >> +out:
> >> + kfree(buffer.pointer);
> >> +}
> >> +
> >> +static acpi_status
> >> +intel_soc_pmic_pmop_handler(u32 function, acpi_physical_address address,
> >> + u32 bits, u64 *value64,
> >> + void *handler_context, void *region_context)
> >> +{
> >> + struct intel_soc_pmic_opregion *opregion = region_context;
> >> + struct regmap *regmap = opregion->regmap;
> >> + struct intel_soc_pmic_opregion_data *d = opregion->data;
> >> + struct pmic_pwr_reg *preg;
> >> + int result;
> >> +
> >> + if (bits != 32 || !value64)
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1))
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + preg = pmic_get_pwr_reg(address, d->pwr_table, d->pwr_table_count);
> >> + if (!preg)
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + mutex_lock(&opregion->lock);
> >> +
> >> + if (function == ACPI_READ)
> >> + result = d->get_power(regmap, preg, value64);
> >> + else
> >> + result = d->update_power(regmap, preg, *value64 == 1);
> >> +
> >> + mutex_unlock(&opregion->lock);
> >> +
> >> + return result ? AE_ERROR : AE_OK;
> >> +}
> >> +
> >> +static acpi_status pmic_read_temp(struct intel_soc_pmic_opregion *opregion,
> >> + int reg, u64 *value)
> >> +{
> >> + int raw_temp, temp;
> >> +
> >> + if (!opregion->data->get_raw_temp)
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg);
> >> + if (raw_temp < 0)
> >> + return AE_ERROR;
> >> +
> >> + if (!opregion->lpat) {
> >> + *value = raw_temp;
> >> + return AE_OK;
> >> + }
> >> +
> >> + temp = raw_to_temp(opregion->lpat, opregion->lpat_count, raw_temp);
> >> + if (temp < 0)
> >> + return AE_ERROR;
> >> +
> >> + *value = temp;
> >> + return AE_OK;
> >> +}
> >> +
> >> +static acpi_status pmic_dptf_temp(struct intel_soc_pmic_opregion *opregion,
> >> + int reg, u32 function, u64 *value)
> >> +{
> >> + if (function != ACPI_READ)
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + return pmic_read_temp(opregion, reg, value);
> >> +}
> >> +
> >> +static acpi_status pmic_dptf_aux(struct intel_soc_pmic_opregion *opregion,
> >> + int reg, u32 function, u64 *value)
> >> +{
> >> + int raw_temp;
> >> +
> >> + if (function == ACPI_READ)
> >> + return pmic_read_temp(opregion, reg, value);
> >> +
> >> + if (!opregion->data->update_aux)
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + if (opregion->lpat) {
> >> + raw_temp = temp_to_raw(opregion->lpat, opregion->lpat_count,
> >> + *value);
> >> + if (raw_temp < 0)
> >> + return AE_ERROR;
> >> + } else {
> >> + raw_temp = *value;
> >> + }
> >> +
> >> + return opregion->data->update_aux(opregion->regmap, reg, raw_temp) ?
> >> + AE_ERROR : AE_OK;
> >> +}
> >> +
> >> +static acpi_status pmic_dptf_pen(struct intel_soc_pmic_opregion *opregion,
> >> + int reg, u32 function, u64 *value)
> >> +{
> >> + struct intel_soc_pmic_opregion_data *d = opregion->data;
> >> + struct regmap *regmap = opregion->regmap;
> >> +
> >> + if (!d->get_policy || !d->update_policy)
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + if (function == ACPI_READ)
> >> + return d->get_policy(regmap, reg, value) ? AE_ERROR : AE_OK;
> >> +
> >> + if (*value != 0 || *value != 1)
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + return d->update_policy(regmap, reg, *value) ? AE_ERROR : AE_OK;
> >> +}
> >> +
> >> +static bool pmic_dptf_is_temp(int address)
> >> +{
> >> + return (address <= 0x3c) && !(address % 12);
> >> +}
> >> +
> >> +static bool pmic_dptf_is_aux(int address)
> >> +{
> >> + return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) ||
> >> + (address >= 8 && address <= 0x44 && !((address - 8) % 12));
> >> +}
> >> +
> >> +static bool pmic_dptf_is_pen(int address)
> >> +{
> >> + return address >= 0x48 && address <= 0x5c;
> >> +}
> >> +
> >> +static acpi_status
> >> +intel_soc_pmic_dptf_handler(u32 function, acpi_physical_address address,
> >> + u32 bits, u64 *value64,
> >> + void *handler_context, void *region_context)
> >> +{
> >> + struct intel_soc_pmic_opregion *opregion = region_context;
> >> + int reg;
> >> + int result;
> >> +
> >> + if (bits != 32 || !value64)
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + reg = pmic_get_dptf_reg(address, opregion->data->dptf_table,
> >> + opregion->data->dptf_table_count);
> >> + if (!reg)
> >> + return AE_BAD_PARAMETER;
> >> +
> >> + mutex_lock(&opregion->lock);
> >> +
> >> + result = AE_BAD_PARAMETER;
> >> + if (pmic_dptf_is_temp(address))
> >> + result = pmic_dptf_temp(opregion, reg, function, value64);
> >> + else if (pmic_dptf_is_aux(address))
> >> + result = pmic_dptf_aux(opregion, reg, function, value64);
> >> + else if (pmic_dptf_is_pen(address))
> >> + result = pmic_dptf_pen(opregion, reg, function, value64);
> >> +
> >> + mutex_unlock(&opregion->lock);
> >> +
> >> + return result;
> >> +}
> >> +
> >> +int
> >> +intel_soc_pmic_install_opregion_handler(struct device *dev,
> >> + acpi_handle handle,
> >> + struct regmap *regmap,
> >> + struct intel_soc_pmic_opregion_data *d)
> >> +{
> >> + acpi_status status;
> >> + struct intel_soc_pmic_opregion *opregion;
> >> +
> >> + if (!dev || !regmap || !d)
> >> + return -EINVAL;
> >> +
> >> + if (!handle)
> >> + return -ENODEV;
> >> +
> >> + opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
> >> + if (!opregion)
> >> + return -ENOMEM;
> >> +
> >> + mutex_init(&opregion->lock);
> >> + opregion->regmap = regmap;
> >> + pmic_dptf_lpat(opregion, handle, dev);
> >> +
> >> + status = acpi_install_address_space_handler(handle,
> >> + PMIC_PMOP_OPREGION_ID,
> >> + intel_soc_pmic_pmop_handler,
> >> + NULL, opregion);
> >> + if (ACPI_FAILURE(status))
> >> + return -ENODEV;
> >> +
> >> + status = acpi_install_address_space_handler(handle,
> >> + PMIC_DPTF_OPREGION_ID,
> >> + intel_soc_pmic_dptf_handler,
> >> + NULL, opregion);
> >> + if (ACPI_FAILURE(status)) {
> >> + acpi_remove_address_space_handler(handle, PMIC_PMOP_OPREGION_ID,
> >> + intel_soc_pmic_pmop_handler);
> >> + return -ENODEV;
> >> + }
> >> +
> >> + opregion->data = d;
> >> + return 0;
> >> +}
> >> +EXPORT_SYMBOL_GPL(intel_soc_pmic_install_opregion_handler);
> >> +
> >> +void intel_soc_pmic_remove_opregion_handler(acpi_handle handle)
> >> +{
> >> + acpi_remove_address_space_handler(handle, PMIC_PMOP_OPREGION_ID,
> >> + intel_soc_pmic_pmop_handler);
> >> + acpi_remove_address_space_handler(handle, PMIC_DPTF_OPREGION_ID,
> >> + intel_soc_pmic_dptf_handler);
> >> +}
> >> +EXPORT_SYMBOL_GPL(intel_soc_pmic_remove_opregion_handler);
> >> +
> >> +MODULE_LICENSE("GPL");
> >> diff --git a/drivers/mfd/intel_soc_pmic_opregion.h b/drivers/mfd/intel_soc_pmic_opregion.h
> >> new file mode 100644
> >> index 000000000000..752ec3d2bcbb
> >> --- /dev/null
> >> +++ b/drivers/mfd/intel_soc_pmic_opregion.h
> >> @@ -0,0 +1,35 @@
> >> +#ifndef __INTEL_SOC_PMIC_OPREGION_H
> >> +#define __INTEL_SOC_PMIC_OPREGION_H
> >> +
> >> +struct pmic_pwr_reg {
> >> + int reg; /* corresponding PMIC register */
> >> + int bit; /* control bit for power */
> >> +};
> >> +
> >> +struct pmic_pwr_table {
> >> + int address; /* operation region address */
> >> + struct pmic_pwr_reg pwr_reg;
> >> +};
> >> +
> >> +struct pmic_dptf_table {
> >> + int address; /* operation region address */
> >> + int reg; /* corresponding thermal register */
> >> +};
> >> +
> >> +struct intel_soc_pmic_opregion_data {
> >> + int (*get_power)(struct regmap *r, struct pmic_pwr_reg *preg, u64 *value);
> >> + int (*update_power)(struct regmap *r, struct pmic_pwr_reg *preg, bool on);
> >> + int (*get_raw_temp)(struct regmap *r, int reg);
> >> + int (*update_aux)(struct regmap *r, int reg, int raw_temp);
> >> + int (*get_policy)(struct regmap *r, int reg, u64 *value);
> >> + int (*update_policy)(struct regmap *r, int reg, int enable);
> >> + struct pmic_pwr_table *pwr_table;
> >> + int pwr_table_count;
> >> + struct pmic_dptf_table *dptf_table;
> >> + int dptf_table_count;
> >> +};
> >> +
> >> +int intel_soc_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_soc_pmic_opregion_data *d);
> >> +void intel_soc_pmic_remove_opregion_handler(acpi_handle handle);
> >> +
> >> +#endif
> >
>


\
 
 \ /
  Last update: 2014-10-13 11:42    [W:0.136 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site