lkml.org 
[lkml]   [2014]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH RESEND] gpio: lib-sysfs: Add 'wakeup' attribute
On Fri, Sep 5, 2014 at 2:58 AM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:
> Add an attribute 'wakeup' to the GPIO sysfs interface which allows
> marking/unmarking a GPIO as wake IRQ.
> The file 'wakeup' is created in each exported GPIOs directory, if an IRQ
> is associated with that GPIO and the irqchip implements set_wake().
> Writing 'enabled' to that file will enable wake for that GPIO, while
> writing 'disabled' will disable wake.
> Reading that file will return either 'disabled' or 'enabled' depening on
> the currently set flag for the GPIO's IRQ.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> ---
> Hi all,
>
> I originally submitted this patch with a few fixes for Zynq's GPIO driver
> (https://lkml.org/lkml/2014/8/29/391). Since this change is not just
> Zynq-related and has broader impact, Linus asked me to post this again, separate
> from the Zynq series.
>
> Let me just quote myself from the original submission:
> "I'm still not fully convinced that the gpio_keys are the best
> replacement for the sysfs interface when it comes to inputs. For that
> reason and to have a way to do some quick wake testing, I'd like to
> propose adding the ability to control wake through the sysfs interface
> (patch 3)."

I'm really sorry that I did not provide feedback sooner. This is the
kind of area (IRQ) where I am not too confident and typically like to
hear what Linus has to say first. But I also have a few questions that
you could maybe answer for my own education. :)

>
> Thanks,
> Sören
>
> drivers/gpio/gpiolib-sysfs.c | 75 ++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 69 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
> index 5f2150b619a7..aaf021eaaff5 100644
> --- a/drivers/gpio/gpiolib-sysfs.c
> +++ b/drivers/gpio/gpiolib-sysfs.c
> @@ -286,6 +286,56 @@ found:
>
> static DEVICE_ATTR(edge, 0644, gpio_edge_show, gpio_edge_store);
>
> +static ssize_t gpio_wakeup_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + ssize_t status;
> + const struct gpio_desc *desc = dev_get_drvdata(dev);
> + int irq = gpiod_to_irq(desc);
> + struct irq_desc *irq_desc = irq_to_desc(irq);
> +
> + mutex_lock(&sysfs_lock);
> +
> + if (irqd_is_wakeup_set(&irq_desc->irq_data))
> + status = sprintf(buf, "enabled\n");
> + else
> + status = sprintf(buf, "disabled\n");
> +
> + mutex_unlock(&sysfs_lock);
> +
> + return status;
> +}
> +
> +static ssize_t gpio_wakeup_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t size)
> +{
> + int ret;
> + unsigned int on;
> + struct gpio_desc *desc = dev_get_drvdata(dev);
> + int irq = gpiod_to_irq(desc);
> +
> + mutex_lock(&sysfs_lock);
> +
> + if (sysfs_streq("enabled", buf))
> + on = true;
> + else if (sysfs_streq("disabled", buf))
> + on = false;
> + else
> + return -EINVAL;

You forgot to release sysfs_lock before returning here.

> +
> + ret = irq_set_irq_wake(irq, on);

Just wondering: is it always safe to set the wake property of an IRQ
even if the direction of its associated GPIO is output? Does it make
sense at all to have the "wakeup" attribute file visible if the GPIO
is an output one?

> +
> + mutex_unlock(&sysfs_lock);
> +
> + if (ret)
> + pr_warn("%s: failed to %s wake\n", __func__,
> + on ? "enable" : "disable");
> +
> + return size;
> +}
> +
> +static DEVICE_ATTR(wakeup, 0644, gpio_wakeup_show, gpio_wakeup_store);
> +
> static int sysfs_set_active_low(struct gpio_desc *desc, struct device *dev,
> int value)
> {
> @@ -526,7 +576,7 @@ static struct class gpio_class = {
> int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
> {
> unsigned long flags;
> - int status;
> + int status, irq;
> const char *ioname = NULL;
> struct device *dev;
> int offset;
> @@ -582,11 +632,24 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
> goto fail_unregister_device;
> }
>
> - if (gpiod_to_irq(desc) >= 0 && (direction_may_change ||
> - !test_bit(FLAG_IS_OUT, &desc->flags))) {
> - status = device_create_file(dev, &dev_attr_edge);
> - if (status)
> - goto fail_unregister_device;
> + irq = gpiod_to_irq(desc);
> + if (irq >= 0) {
> + struct irq_desc *irq_desc = irq_to_desc(irq);
> + struct irq_chip *irqchip = irq_desc_get_chip(irq_desc);
> +
> + if (direction_may_change ||
> + !test_bit(FLAG_IS_OUT, &desc->flags)) {
> + status = device_create_file(dev, &dev_attr_edge);
> + if (status)
> + goto fail_unregister_device;
> + }
> +
> + if (irqchip->flags & IRQCHIP_SKIP_SET_WAKE ||
> + irqchip->irq_set_wake) {
> + status = device_create_file(dev, &dev_attr_wakeup);
> + if (status)
> + goto fail_unregister_device;
> + }

Ok, I guess that answers my question. The edge property is always
visible so it probably doesn't hurt if the wakeup property also is.

The only thing that bothers me a little bit is that both "edge" and
"wakeup" are not very explicit names, but I guess it can't be helped.

Typically I am not too fond of adding features to this sysfs
interface, but since this patch is purely local to gpiolib-sysfs.c and
exposes a property that is arguably not less worthy that the others to
be exposed, I'm ok with it.

Once the lock issue I mentioned above is fixed, please feel free to add my

Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>

And let's see what Linus thinks of it.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-11 07:22    [W:0.093 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site