lkml.org 
[lkml]   [2014]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: serial: ftdi_sio: add Awinda Station and Dongle products
On Fri, Oct 10, 2014 at 10:44:54AM +0200, Frans Klaver wrote:
> Add new IDs for the Xsens Awinda Station and Awinda Dongle.
>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
> ---
> drivers/usb/serial/ftdi_sio.c | 2 ++
> drivers/usb/serial/ftdi_sio_ids.h | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
> index dc72b92..4969875 100644
> --- a/drivers/usb/serial/ftdi_sio.c
> +++ b/drivers/usb/serial/ftdi_sio.c
> @@ -663,6 +663,8 @@ static const struct usb_device_id id_table_combined[] = {
> { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
> { USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
> { USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
> + { USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
> + { USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },

Could you keep the XSENS_VID entries sorted alphabetically here?

> { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
> { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
> { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
> diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
> index 5937b2d..be3fffe 100644
> --- a/drivers/usb/serial/ftdi_sio_ids.h
> +++ b/drivers/usb/serial/ftdi_sio_ids.h
> @@ -145,6 +145,8 @@
> #define XSENS_VID 0x2639
> #define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
> #define XSENS_MTW_PID 0x0200 /* Xsens MTw */
> +#define XSENS_AWINDA_STATION_PID 0x0101
> +#define XSENS_AWINDA_DONGLE_PID 0x0102

And sorted by PID here (even though the two current entries are not, you
could reorder them as well).

I noticed that the below PIDs use the FTDI VID. Perhaps a comment or at
least a separating empty line would be appropriate.

> #define XSENS_CONVERTER_0_PID 0xD388 /* Xsens USB converter */
> #define XSENS_CONVERTER_1_PID 0xD389 /* Xsens Wireless Receiver */
> #define XSENS_CONVERTER_2_PID 0xD38A

Thanks,
Johan


\
 
 \ /
  Last update: 2014-10-10 11:42    [W:0.103 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site