lkml.org 
[lkml]   [2014]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH fixes 2/2] extcon: max77693: Fix always masked MUIC interrupts
On Fri, 10 Oct 2014, Krzysztof Kozlowski wrote:

> All interrupts coming from MUIC were ignored because interrupt source
> register was masked.
>
> The Maxim 77693 has a "interrupt source" - a separate register and interrupts
> which give information about PMIC block triggering the individual
> interrupt (charger, topsys, MUIC, flash LED).
>
> By default bootloader could initialize this register to "mask all"
> value. In such case (observed on Trats2 board) MUIC interrupts won't be
> generated regardless of their mask status. Regmap irq chip was unmasking
> individual MUIC interrupts but the source was masked
>
> Before introducing regmap irq chip this interrupt source was unmasked,
> read and acked. Reading and acking is not necessary but unmasking is. Do
> it in extcon driver.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: <stable@vger.kernel.org>
> Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
> ---
> drivers/extcon/extcon-max77693.c | 16 ++++++++++++++++
> include/linux/mfd/max77693-private.h | 5 +++++
> 2 files changed, 21 insertions(+)

Did you run this through checkpatch?

> diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
> index 490e27475bac..d3adacf3187f 100644
> --- a/drivers/extcon/extcon-max77693.c
> +++ b/drivers/extcon/extcon-max77693.c
> @@ -1176,6 +1176,22 @@ static int max77693_muic_probe(struct platform_device *pdev)
> }
> }
>
> + if (i) {
> + /*
> + * i>0, at least one MUIC interrupt requested so need to unmask
> + * MUIC interrupt in INTSRC register. Without that MUIC
> + * interrupts will not be reported.
> + */
> + ret = regmap_update_bits(max77693->regmap,
> + MAX77693_PMIC_REG_INTSRC_MASK, SRC_IRQ_MUIC,
> + ~SRC_IRQ_MUIC);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Could not unmask MUIC interrupt in INTSRC: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> /* Initialize extcon device */
> info->edev = devm_extcon_dev_allocate(&pdev->dev,
> max77693_extcon_cable);
> diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
> index e1b2b61285b9..4f1a80b66ecf 100644
> --- a/include/linux/mfd/max77693-private.h
> +++ b/include/linux/mfd/max77693-private.h
> @@ -438,6 +438,11 @@ enum max77693_irq_source {
> MAX77693_IRQ_GROUP_NR,
> };
>
> +#define SRC_IRQ_CHARGER BIT(0)
> +#define SRC_IRQ_TOP BIT(1)
> +#define SRC_IRQ_FLASH BIT(2)
> +#define SRC_IRQ_MUIC BIT(3)
> +
> #define LED_IRQ_FLED2_OPEN BIT(0)
> #define LED_IRQ_FLED2_SHORT BIT(1)
> #define LED_IRQ_FLED1_OPEN BIT(2)

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-10 11:41    [W:0.073 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site