lkml.org 
[lkml]   [2014]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Kernel Patch to add Endrun PCIe PTP card v1 (1/2)
On Fri, Oct 10, 2014 at 02:19:47PM -0700, Mike Skoog wrote:
> =====================================================
> Subject: [PATCHv1 1/2] 8250_pci: pci.ids: EndRun Technologies PTP PCIe
> card recognition.
> From: Michael Skoog, EndRun Technologies, Inc.

What is all of this here for? I shouldn't have to hand-edit a changelog
body in order to apply it, try using git send-email to send the patch
out in an easier format.

>
> Add recognition of EndRun Technologies PCIe PTP slave card
> and setups two ttySx ports to communicate to the card for
> retrieval of PTP based time and to communicate with the card's
> Linux OS.
>
> Signed-off-by: Michael Skoog <mskoog@endruntechnologies.com>
> Signed-off-by: Mike Korreng <mkorreng@endruntechnologies.com>
>
> ---
>
> The kernel patch is currently against linux 3.17 kernel, for the x86
> architecture.
>
> The pci.ids patch is against the Slackware 13 distribution.
>
> diffstat:
> 8250_pci.c | 66
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 66 insertions(+)

Your patch is line-wrapped and can't be applied :(



>
> Please let me know any feedback you have on this patch or the approach used.
>
> Thanks,
>
> =====================
> Michael Skoog
> Software Engineer
> EndRun Technologies
> =====================
>
>
> --------------------------------------------------------------------------------
> diff -up linux-3.16.3/drivers/tty/serial/8250/8250_pci.c{.orig,} >
> /tmp/8250_pci.c.patch

Why do you have 2 diff lines here? Did you hand-edit this?

>
> --- linux-3.17/drivers/tty/serial/8250/8250_pci.c.orig 2014-10-09
> 09:29:31.083013764 -0700
> +++ linux-3.17/drivers/tty/serial/8250/8250_pci.c 2014-10-09
> 13:20:34.817731134 -0700
> @@ -1000,6 +1000,40 @@ static void pci_ite887x_exit(struct pci_
> }
>
> /*
> + * EndRun Technologies.
> + * Determine the number of ports available on the device.
> + */
> +#define PCI_VENDOR_ID_ENDRUN 0x7401
> +#define PCI_DEVICE_ID_ENDRUN_1588 0xe100
> +
> +static int pci_endrun_init(struct pci_dev *dev)
> +{
> + u8 __iomem *p;
> + unsigned long deviceID;
> + unsigned int number_uarts = 0;
> +
> + /* EndRun device is all 0xexxx */
> + if (dev->vendor == PCI_VENDOR_ID_ENDRUN &&
> + (dev->device & 0xf000) != 0xe000)
> + return 0;
> +
> + p = pci_iomap(dev, 0, 5);
> + if (p == NULL)
> + return -ENOMEM;
> +
> + deviceID = ioread32(p);
> + /* EndRun device */
> + if (deviceID == 0x07000200) {
> + number_uarts = ioread8(p + 4);
> + dev_dbg(&dev->dev,
> + "%d ports detected on EndRun PCI Express device\n",
> + number_uarts);
> + }
> + pci_iounmap(dev, p);
> + return number_uarts;
> +}
> +
> +/*
> * Oxford Semiconductor Inc.
> * Check that device is part of the Tornado range of devices, then
> determine
> * the number of ports available on the device.
> @@ -2303,6 +2337,17 @@ static struct pci_serial_quirk pci_seria
> .setup = pci_netmos_9900_setup,
> },
> /*
> + * EndRun Technologies
> + */
> + {
> + .vendor = PCI_VENDOR_ID_ENDRUN,
> + .device = PCI_ANY_ID,
> + .subvendor = PCI_ANY_ID,
> + .subdevice = PCI_ANY_ID,
> + .init = pci_endrun_init,
> + .setup = pci_default_setup,
> + },
> + /*
> * For Oxford Semiconductor Tornado based devices
> */
> {
> @@ -2711,6 +2756,7 @@ enum pci_board_num_t {
> pbn_panacom2,
> pbn_panacom4,
> pbn_plx_romulus,
> + pbn_endrun_2_4000000,
> pbn_oxsemi,
> pbn_oxsemi_1_4000000,
> pbn_oxsemi_2_4000000,
> @@ -3255,6 +3301,20 @@ static struct pciserial_board pci_boards
> },
>
> /*
> + * EndRun Technologies
> + * Uses the size of PCI Base region 0 to
> + * signal now many ports are available
> + * 2 port 952 Uart support
> + */
> + [pbn_endrun_2_4000000] = {
> + .flags = FL_BASE0,
> + .num_ports = 2,
> + .base_baud = 4000000,
> + .uart_offset = 0x200,
> + .first_offset = 0x1000,
> + },
> +
> + /*
> * This board uses the size of PCI Base region 0 to
> * signal now many ports are available
> */
> @@ -4121,6 +4181,12 @@ static struct pci_device_id serial_pci_t
> 0x10b5, 0x106a, 0, 0,
> pbn_plx_romulus },
> /*
> + * EndRun Technologies. PCI express device range.
> + */
> + { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, /* EndRun PTP/1588
> 2 Native UART */
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0,
> + pbn_endrun_2_4000000 },
> + /*
> * Quatech cards. These actually have configurable clocks but for
> * now we just use the default.
> *


Other than the basic formatting issues mentioned, the patch looks fine,
can you fix those up and resend it so that I can apply it?

thanks,

greg k-h


\
 
 \ /
  Last update: 2014-10-11 01:02    [W:0.170 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site