lkml.org 
[lkml]   [2014]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/12] rtc: omap: enable wake-up from power off
On Thu, Oct 09, 2014 at 09:06:32PM +0200, Johan Hovold wrote:
> The ALARM interrupt must not be disabled during shutdown in order to be
> able to power up the system using an RTC alarm.
>
> Signed-off-by: Johan Hovold <johan@kernel.org>

nicely done!

Reviewed-by: Felipe Balbi <balbi@ti.com>

> ---
> drivers/rtc/rtc-omap.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
> index b0319864dd42..8836c58901b5 100644
> --- a/drivers/rtc/rtc-omap.c
> +++ b/drivers/rtc/rtc-omap.c
> @@ -670,7 +670,15 @@ static SIMPLE_DEV_PM_OPS(omap_rtc_pm_ops, omap_rtc_suspend, omap_rtc_resume);
>
> static void omap_rtc_shutdown(struct platform_device *pdev)
> {
> - rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
> + u8 mask;
> +
> + /*
> + * Keep the ALARM interrupt enabled to allow the system to power up on
> + * alarm events.
> + */
> + mask = rtc_read(OMAP_RTC_INTERRUPTS_REG);
> + mask &= OMAP_RTC_INTERRUPTS_IT_ALARM;
> + rtc_write(mask, OMAP_RTC_INTERRUPTS_REG);
> }
>
> MODULE_ALIAS("platform:omap_rtc");
> --
> 2.0.4
>

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-10-10 20:41    [W:0.356 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site