lkml.org 
[lkml]   [2014]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 06/12] rtc: omap: use dev_info and dev_dbg
On Thu, Oct 09, 2014 at 09:06:28PM +0200, Johan Hovold wrote:
> Use dev_info and dev_dbg rather than pr_info and pr_debug.
>
> Signed-off-by: Johan Hovold <johan@kernel.org>

thanks!

Reviewed-by: Felipe Balbi <balbi@ti.com>

> ---
> drivers/rtc/rtc-omap.c | 19 +++++++++----------
> 1 file changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
> index e50ffd7063f5..1c58920b0c88 100644
> --- a/drivers/rtc/rtc-omap.c
> +++ b/drivers/rtc/rtc-omap.c
> @@ -392,13 +392,13 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
>
> omap_rtc_timer = platform_get_irq(pdev, 0);
> if (omap_rtc_timer <= 0) {
> - pr_debug("%s: no update irq?\n", pdev->name);
> + dev_dbg(&pdev->dev, "no update irq\n");
> return -ENOENT;
> }
>
> omap_rtc_alarm = platform_get_irq(pdev, 1);
> if (omap_rtc_alarm <= 0) {
> - pr_debug("%s: no alarm irq?\n", pdev->name);
> + dev_dbg(&pdev->dev, "no alarm irq\n");
> return -ENOENT;
> }
>
> @@ -430,8 +430,7 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> /* clear old status */
> reg = rtc_read(OMAP_RTC_STATUS_REG);
> if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
> - pr_info("%s: RTC power up reset detected\n",
> - pdev->name);
> + dev_info(&pdev->dev, "RTC power up reset detected\n");
> rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
> }
> if (reg & (u8) OMAP_RTC_STATUS_ALARM)
> @@ -440,22 +439,22 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> /* handle periodic and alarm irqs */
> if (devm_request_irq(&pdev->dev, omap_rtc_timer, rtc_irq, 0,
> dev_name(&pdev->dev), pdev)) {
> - pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
> - pdev->name, omap_rtc_timer);
> + dev_dbg(&pdev->dev, "RTC timer interrupt IRQ%d already claimed\n",
> + omap_rtc_timer);
> goto fail0;
> }
> if ((omap_rtc_timer != omap_rtc_alarm) &&
> (devm_request_irq(&pdev->dev, omap_rtc_alarm, rtc_irq, 0,
> dev_name(&pdev->dev), pdev))) {
> - pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
> - pdev->name, omap_rtc_alarm);
> + dev_dbg(&pdev->dev, "RTC alarm interrupt IRQ%d already claimed\n",
> + omap_rtc_alarm);
> goto fail0;
> }
>
> /* On boards with split power, RTC_ON_NOFF won't reset the RTC */
> reg = rtc_read(OMAP_RTC_CTRL_REG);
> if (reg & (u8) OMAP_RTC_CTRL_STOP)
> - pr_info("%s: already running\n", pdev->name);
> + dev_info(&pdev->dev, "already running\n");
>
> /* force to 24 hour mode */
> new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP);
> @@ -476,7 +475,7 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
> */
>
> if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT)
> - pr_info("%s: split power mode\n", pdev->name);
> + dev_info(&pdev->dev, "split power mode\n");
>
> if (reg != new_ctrl)
> rtc_write(new_ctrl, OMAP_RTC_CTRL_REG);
> --
> 2.0.4
>

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-10-10 20:41    [W:0.410 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site