Messages in this thread | | | Date | Fri, 10 Oct 2014 16:01:48 +0200 | From | Boris Brezillon <> | Subject | Re: [PATCH] ARM: at91/dt: sam9263: fix PLLB frequencies |
| |
On Fri, 10 Oct 2014 15:50:21 +0200 Alexandre Belloni <alexandre.belloni@free-electrons.com> wrote:
> From: Boris Brezillon <boris.brezillon@free-electrons.com> > > PLLB input and output ranges were wrongly copied from at91sam9261 as the > datasheet didn't mention explicitly PLLB. Correct their values. > > This fixes USB. > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Thanks for sending this patch.
Just adding Andreas in Cc and adding his Reported and Tested-by.
Reported-by: Andreas Henriksson <andreas.henriksson@endian.se> Tested-by: Andreas Henriksson <andreas.henriksson@endian.se>
> --- > arch/arm/boot/dts/at91sam9263.dtsi | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi > index d68b3c4862bc..51416c7d0625 100644 > --- a/arch/arm/boot/dts/at91sam9263.dtsi > +++ b/arch/arm/boot/dts/at91sam9263.dtsi > @@ -122,9 +122,10 @@ > interrupts-extended = <&pmc AT91_PMC_LOCKB>; > clocks = <&main>; > reg = <1>; > - atmel,clk-input-range = <1000000 5000000>; > + atmel,clk-input-range = <1000000 32000000>; > #atmel,pll-clk-output-range-cells = <4>; > - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; > + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, > + <190000000 240000000 2 1>; > }; > > mck: masterck {
-- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
| |