lkml.org 
[lkml]   [2014]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/4] pmbus: ltc2978: add regulator support
On Wed, Oct 01, 2014 at 03:18:20PM -0500, atull@opensource.altera.com wrote:
> From: Alan Tull <atull@opensource.altera.com>
>
> Add simple on/off regulator support for ltc2978 and
> other pmbus parts supported by ltc2978.c
>
> Signed-off-by: Alan Tull <atull@opensource.altera.com>
>
> v2: Remove '#include <linux/regulator/machine.h>'
> Only one regulator per pmbus device
> Get regulator_init_data from pdata or device tree
>
> v3: Support multiple regulators for each chip
> Move most code to pmbus_core.c
> fixed values for on/off
>
> v4: fix a #endif comment
> simplify probe code, remove added switch statement
> remove BUG_ON(), add error message and fix num_regulators
> ---
> drivers/hwmon/pmbus/Kconfig | 7 +++++++
> drivers/hwmon/pmbus/ltc2978.c | 37 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 44 insertions(+)
>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 6e1e493..79117b7 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -56,6 +56,13 @@ config SENSORS_LTC2978
> This driver can also be built as a module. If so, the module will
> be called ltc2978.
>
> +config SENSORS_LTC2978_REGULATOR
> + boolean "Regulator support for LTC2974, LTC2978, LTC3880, and LTC3883"

We will need to update this and SENSORS_LTC2978 and add LTC2977 as well as
LTM4646 to the list of supported chips.

Guenter

> + depends on SENSORS_LTC2978 && REGULATOR
> + help
> + If you say yes here you get regulator support for Linear
> + Technology LTC2974, LTC2978, LTC3880, and LTC3883.
> +
> config SENSORS_MAX16064
> tristate "Maxim MAX16064"
> default n
> diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
> index e24ed52..422712e 100644
> --- a/drivers/hwmon/pmbus/ltc2978.c
> +++ b/drivers/hwmon/pmbus/ltc2978.c
> @@ -22,6 +22,8 @@
> #include <linux/err.h>
> #include <linux/slab.h>
> #include <linux/i2c.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/of_regulator.h>
> #include "pmbus.h"
>
> enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883, ltm4676 };
> @@ -374,6 +376,30 @@ static const struct i2c_device_id ltc2978_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, ltc2978_id);
>
> +#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
> +static const struct regulator_desc ltc2978_reg_desc[] = {
> + PMBUS_REGULATOR("vout_en", 0),
> + PMBUS_REGULATOR("vout_en", 1),
> + PMBUS_REGULATOR("vout_en", 2),
> + PMBUS_REGULATOR("vout_en", 3),
> + PMBUS_REGULATOR("vout_en", 4),
> + PMBUS_REGULATOR("vout_en", 5),
> + PMBUS_REGULATOR("vout_en", 6),
> + PMBUS_REGULATOR("vout_en", 7),
> +};
> +
> +static struct of_regulator_match ltc2978_reg_matches[] = {
> + { .name = "vout_en0" },
> + { .name = "vout_en1" },
> + { .name = "vout_en2" },
> + { .name = "vout_en3" },
> + { .name = "vout_en4" },
> + { .name = "vout_en5" },
> + { .name = "vout_en6" },
> + { .name = "vout_en7" },
> +};
> +#endif /* CONFIG_SENSORS_LTC2978_REGULATOR */
> +
> static int ltc2978_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -487,6 +513,17 @@ static int ltc2978_probe(struct i2c_client *client,
> default:
> return -ENODEV;
> }
> +
> +#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
> + info->num_regulators = info->pages;
> + info->reg_desc = ltc2978_reg_desc;
> + info->reg_matches = ltc2978_reg_matches;
> + if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) {
> + dev_err(&client->dev, "num_regulators too large!");
> + info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc);
> + }
> +#endif
> +
> return pmbus_do_probe(client, id, info);
> }
>
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2014-10-02 00:21    [W:0.049 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site